Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7...
Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...
Save by Purchasing a Quantity of 7 Boxes (63 Pieces)! The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using...
Save by Purchasing a Quantity of 7 Boxes (63 Pieces)! The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3" Wide x...
The Simpson Strong-Tie DTT2SS-SDS2.5 Type 316L Stainless Steel Tension Tie with 2-1/2" Stainless SDS Screws is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because...
The Simpson Strong-Tie DTT2SS-SDS2.5 Type 316L Stainless Steel Tension Tie with 2-1/2" Stainless SDS Screws is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2SS also complies with the new IRC...
The Simpson Strong-Tie HD7BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This...
The Simpson Strong-Tie HD7BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown uses the same design as the HDQ8-SDS2.5 holdown that is proven to greatly reduce deflection while under load. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. The HD7B must be connected to a...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASAZ ZMax® anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASAZ ZMax® anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAZ version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish...
The Simpson Strong-Tie PAB4-36 1/2" x 36" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB4-36 1/2" x 36" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
Simpson Strong-Tie PBS66 Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over...
Simpson Strong-Tie PBS66 Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Finish: Standard G90 Galvanized Base Material: 12 Gauge Base Dimensions: 5-1/2" x 5-3/8" Strap Material: 14 Gauge Strap Height: 6-1/2" Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS66 information and installation instructions Standard G90 Zinc Galvanized Coating Information...
The geometry of the Simpson Strong-Tie SB1x30HDG Hot Dipped Galvanized 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the...
The geometry of the Simpson Strong-Tie SB1x30HDG Hot Dipped Galvanized 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB1x30HDG with a minimum embedment of 24" is intended to cover holdown devices that exceed the capacity of SSTB anchors. Identification on the bolt head showing embedment...
Save by Purchasing a Quantity of 10 Boxes (90 Pieces)! Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed...
Save by Purchasing a Quantity of 10 Boxes (90 Pieces)! Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
The Simpson CBSQ46-SDS2HDG (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...
The Simpson CBSQ46-SDS2HDG (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3"...
Simpson Strong-Tie EPB46 allows you to install an elevated 4 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 6 post to stay above most standing water thus delaying...
Simpson Strong-Tie EPB46 allows you to install an elevated 4 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...
The Simpson Strong-Tie HD9B Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown uses the same design...
The Simpson Strong-Tie HD9B Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown uses the same design as the HDQ8-SDS2.5 holdown that is proven to greatly reduce deflection while under load. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. The HD9B must be connected to a minimum of 3-1/2" of...
Simpson Strong-Tie HDU4-SDS2.5 Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with...
Simpson Strong-Tie HDU4-SDS2.5 Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in either...
The Simpson PB46 Post Base for 4 x 6 (3-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed...
The Simpson PB46 Post Base for 4 x 6 (3-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails PB46 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This...
The Simpson Strong-Tie SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...
The Simpson Strong-Tie SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 21-5/8" Minimum Embedment: 16-5/8" Finish: None Rolled threads for higher...