Login/Register
Shopping Cart
OR
The Simpson Strong-Tie THD50400H6SS Type 316 Stainless Steel 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD50400H6SS Type 316 Stainless Steel 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
Simpson Strong-Tie LUC210SS Type 316L Stainless Steel 2 x 10/12 Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC210SS also provides cleaner lines for...
Simpson Strong-Tie LUC210SS Type 316L Stainless Steel 2 x 10/12 Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC210SS also provides cleaner lines for exposed conditions such as overhead decks. Material: 18 Gauge Finish:Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 7-3/4" (Height) x 1-3/4" (Seat Depth) Fastener Options: (10) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 1-1/2" 10d Nails (Joist) Strong Drive® SD9112 #9 x 1-1/2" Structural...
Simpson Strong Tie LUS28SS Type 316L Stainless Steel 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...
Simpson Strong Tie LUS28SS Type 316L Stainless Steel 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28SS 2 x 8 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 6-5/8"...
Simpson Strong Tie HUCQ412Z-SDSG ZMax® 3-9/16" Wide 4 x 12 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ412Z-SDSG ZMax® hangers with...
Simpson Strong Tie HUCQ412Z-SDSG ZMax® 3-9/16" Wide 4 x 12 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ412Z-SDSG ZMax® hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-9/16" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (14) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...
The Simpson Strong-Tie A88 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 22" Flange #1 (W1): 8" Flange #2...
The Simpson Strong-Tie A88 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 22" Flange #1 (W1): 8" Flange #2 (W2): 8" Fasteners: (8) 10d x 3" Nails or (6) 3/8" Bolts A88 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
The Simpson Strong-Tie RTT12 T Connector is designed to secure a horizontal 1x member to a vertical 2x member in wood applications. Manufactured to high-quality standards to ensure solid...
The Simpson Strong-Tie RTT12 T Connector is designed to secure a horizontal 1x member to a vertical 2x member in wood applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie tee connector features a galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized steel Easier and stronger than angled fastening Material: 18 Gauge Finish:...
The Simpson Strong-Tie SP8 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top...
The Simpson Strong-Tie SP8 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. Load rated Designed to resist wind and seismic forces Does not require top or bottom track attachment Material: 20...
Save by Purchasing a Quantity of 12 Boxes (120 Pieces)! The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This...
Save by Purchasing a Quantity of 12 Boxes (120 Pieces)! The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal...
Save by Purchasing a Quantity of 12 Boxes (48 Pieces)! Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to...
Save by Purchasing a Quantity of 12 Boxes (48 Pieces)! Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard...
The Simpson Strong-Tie MAB15 mudsill anchor features design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB15 can...
The Simpson Strong-Tie MAB15 mudsill anchor features design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB15 can eliminate certain problems associated with misplaced anchor bolts. The MAB15 can be installed for 2x4,6,8,10 or 12 mudsills. Suitable for stem wall, concrete block or slab foundations One-piece design, so there are no nuts and washers to lose A easily installed alternative to standard anchor bolts 18 gauge...
The Simpson Strong-Tie TNT18314TF Titen Turbo™ 3/16" x 3-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the...
The Simpson Strong-Tie TNT18314TF Titen Turbo™ 3/16" x 3-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping...
The Simpson Strong-Tie BCS2-2/4Z ZMax® allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose...
The Simpson Strong-Tie BCS2-2/4Z ZMax® allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: ZMax® G-185 Coating Dimensions 3-9/16" (Post Width) x 3-1/8" (Joists Width) Fastener Options: (14) 10d...
Simpson Strong Tie HU28-4 Quad 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU28-4 Quad 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU28-4 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 6-1/8" (Wide) x 7" (Height) x 2-1/2" (Seat Depth) Fastener...
The Simpson MIU2.56/16 hanger is designed to hang 2-1/2" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/16 features positive-angle...
The Simpson MIU2.56/16 hanger is designed to hang 2-1/2" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie BA2.37/16 Top Flange Hanger is designed for 2-5/16" x 16" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA2.37/16 Top Flange Hanger is designed for 2-5/16" x 16" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...
Simpson Strong Drive® SSA10D5 3" x .148" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as...
Simpson Strong Drive® SSA10D5 3" x .148" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 250 nails in the 5 lb. pack. The nails are type 316 stainless steel providing high/severe corrosion protection. SSNA10D Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel chromium...
Simpson Strong-Tie ECCLRQ464SDS End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x...
Simpson Strong-Tie ECCLRQ464SDS End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 5-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLRQ464SDS Information and Installation...
The Simpson MIU2.56/18 hanger is designed to hang 2-1/2" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/18 features positive-angle...
The Simpson MIU2.56/18 hanger is designed to hang 2-1/2" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/18 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie THD50500H4SS Type 304 Stainless Steel 1/2" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD50500H4SS Type 304 Stainless Steel 1/2" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson S15N250SFB 2-1/2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...
The Simpson S15N250SFB 2-1/2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...
Simpson Strong Tie HUC28-4 Quad 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HUC28-4 Quad 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-4 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work. Material: 14...
Simpson Strong Tie U34 3 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U34 3 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 3-3/8" (Height) x 2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 1-1/2" 10d Nails (Joist) U34 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/11.88 is used to install 2-5/16" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/11.88 is used to install 2-5/16" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.37/11.88 Information and Installation...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16" x 9-1/2" I-Joists...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...