Login/Register
Shopping Cart
OR
Filter
Sort By
These 5/8" x 24" zinc plated all thread rods when used with a 5/8" coupling nut can be used for extending machine bolts or any other 5/8" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated...
These 5/8" x 24" zinc plated all thread rods when used with a 5/8" coupling nut can be used for extending machine bolts or any other 5/8" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated Special lengths available upon request Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments....
7/8" x 2-1/2" (H) Witness Hole Coupling Nuts are used to connected two 7/8" threaded rods together or extend a 7/8" SSTB or standard anchor bolt. The witness hole allows the inspector to confirm the...
7/8" x 2-1/2" (H) Witness Hole Coupling Nuts are used to connected two 7/8" threaded rods together or extend a 7/8" SSTB or standard anchor bolt. The witness hole allows the inspector to confirm the rods are connected properly. Zinc Plated Hex Head Imported Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used...
The GRK R49318XL 3-1/8" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast...
The GRK R49318XL 3-1/8" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast Bite Tip eliminates pre-drilling and provides a fast start for one step installation. Combined with the W-Cut™ low installation torque allows these screws are installed quickly and accurately. The GRK Climatek™ coating provides superior corrosion resistance, allowing the screw to be used in...
This 2-1/2" x .148 Bright Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist...
This 2-1/2" x .148 Bright Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please Note: Consult your...
The staple pusher assembly for the Rapid R11 Hammer Tacker is one of the most common parts that need to be replaced from wear and tear. Explanation of "Stock" Availability Term Stock items are...
The staple pusher assembly for the Rapid R11 Hammer Tacker is one of the most common parts that need to be replaced from wear and tear. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock or do not have enough inventory to complete your order we will notify you by phone or email as soon as possible. If you need an immediate inventory status...
The Senco N13BAB, 1" Long, 7/16" Crown, Electro Galvanized Medium Crown 16-gauge staples have had many uses over the years. Even as the codes have changed to requiring the use of more nails than...
The Senco N13BAB, 1" Long, 7/16" Crown, Electro Galvanized Medium Crown 16-gauge staples have had many uses over the years. Even as the codes have changed to requiring the use of more nails than staples there are still many uses for N-Series staples. They include underlayment flooring, shingle siding, vinyl siding, facia, pallets, crating and more. These N-Series staples feature the Sencote coating that allows the staple to install easily and then create a bond with the wood that gives it more...
Head is Painted Dark Brown! The Simpson S11A237KJB 2-3/8" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted dark brown to match siding or...
Head is Painted Dark Brown! The Simpson S11A237KJB 2-3/8" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted dark brown to match siding or decking when applicable. The countersunk casing head with a checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring...
Head is Painted Tan! The Simpson Strong-Tie 2-1/4" x .092" Tan Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from...
Head is Painted Tan! The Simpson Strong-Tie 2-1/4" x .092" Tan Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Tan Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight and accepts...
The Simpson Strong-Drive® SD8X1.25-R #8 x 1-1/4" Wafer-Head Interior Wood Screws provide fastening solutions that ensure a safer, stronger indoor living environment. The versatile wafer-head...
The Simpson Strong-Drive® SD8X1.25-R #8 x 1-1/4" Wafer-Head Interior Wood Screws provide fastening solutions that ensure a safer, stronger indoor living environment. The versatile wafer-head screw is designed for general wood-to-wood fastening where its pull-through resistance is an advantage. This versatile screw features a sharp point for easy installation and is ideal for everything from cabinetry to framing. Wafer head Deep #2 Phillips drive reduces cam-out and makes driving easier...
Simpson Strong-Tie 16D5HDG-R 3-1/2" x .162" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. There are 200 nails in the 5 lb....
Simpson Strong-Tie 16D5HDG-R 3-1/2" x .162" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. There are 200 nails in the 5 lb. pack. The nails are hot dipped galvanized, providing medium corrosion protection. 16D5HDG-R Information and Data Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average coating...
The Simpson Strong-Tie DSVR4R5LB #10 x 4" Deck Drive™ Redwood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip,...
The Simpson Strong-Tie DSVR4R5LB #10 x 4" Deck Drive™ Redwood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Also DSV screws are available in collated strips for use in the Quik Drive® auto-feed screw driving system....
Simpson Strong-Tie PDPAWL-200 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...
Simpson Strong-Tie PDPAWL-200 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 2" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...
The Simpson Strong-Drive® SDS25212SS-R25 1/4" x 2-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood...
The Simpson Strong-Drive® SDS25212SS-R25 1/4" x 2-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25212SS-R25 stainless steel screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 2-1/2" Thread Length: 1-1/2" Serrated Shank...
The Simpson Strong-Tie Quik Drive® WSV3S #9 x 3" Screws are ideal for screwing wood-to-wood when their is little concern about corrosion of the fasteners. The most common use of these screws is...
The Simpson Strong-Tie Quik Drive® WSV3S #9 x 3" Screws are ideal for screwing wood-to-wood when their is little concern about corrosion of the fasteners. The most common use of these screws is for subfloor applications because the screw creates a very tight connection between the plywood and joist. Using a StrongDrive® Automatic Tool with a 20" extension saves time and labor thus saving you money. Redesigned tip and thread pattern provides easy starts and up to 25% less torque while...
The THD37212H 3/8" x 2-1/2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal...
The THD37212H 3/8" x 2-1/2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The...
The Simpson Strong-Tie THD37400H4SS Type 304 Stainless Steel 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD37400H4SS Type 304 Stainless Steel 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...