The Driltec RL-056-190 9/16" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip...
|
The Driltec RL-056-420 9/16" X 16" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-063-190 5/8" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-063-420 5/8" X 16" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-069-190 11/16" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip...
|
The Driltec RL-069-420 11/16" X 16" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-075-190 3/4" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-075-420 3/4" X 16" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-088-190 7/8" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-088-420 7/8" X 16" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-100-190 1" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-100-420 1/2" X 7-1/2" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip...
|
The Driltec RL-113-190 1-1/8" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip...
|
The Driltec RL-113-420 1-1/8" X 16" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Driltec RL-125-190 1-1/4" X 7-1/2" (useable length) x 9" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip...
|
The Driltec RL-125-420 1-1/4" X 16" (useable length) x 18" Ratio RebarCUTTER™ Bits are specifically designed to cut through embedded rebar. This bit not only drills the rebar but chips it away. Our durable and aggressive carbide tip increases...
|
The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that...
|
Save by Purchasing a Quantity of 8 Boxes (128 Pieces)! The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of...
|
The Simpson Strong-Tie HTT4HDG Hot Dipped Galvanized Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. Hot dipped galvanizing provides added protection when install hardware to ACQ lumber. This...
|
The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that...
|
Save by Purchasing a Quantity of 12 Boxes (120 Pieces)! The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of...
|
The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that...
|
Save by Purchasing a Quantity of 12 Boxes (120 Pieces)! The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top...
|
The Simpson Strong-Tie HTT5KT Tension Tie Kit includes (1) HTT5 Tension Tie, (1) BP58-2 Bearing Plate and (26) SD #10 x 2-1/2" Screws. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that...
|
The Simpson Strong-Tie HTT5HDG Hot Dipped Galvanized Tension Tie has added protection for use in areas where corrosion maycause problems like ACQ lumber. This tension tie may be installed up to 18" above the top of the concrete with no load...
|