Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie LPC4Z design allows you the flexibility to connect a 4x or smaller width beam or joist to the top of a 4x post. Sold By Each Material: 18 Gauge Post Width: 3-1/2" Finish:...
The Simpson Strong-Tie LPC4Z design allows you the flexibility to connect a 4x or smaller width beam or joist to the top of a 4x post. Sold By Each Material: 18 Gauge Post Width: 3-1/2" Finish: ZMax® G-185 Galvanized Fasteners: (8) 10d (Beam) , (8) 10d (Post) LPC4Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating (galvanized...
The Simpson Strong-Tie BCS2-2/4 allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post...
The Simpson Strong-Tie BCS2-2/4 allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (Post Width) x 3-1/8" (Joists Width) Fastener Options: (14) 10d Common BCS2-2/4...
Simpson Strong-Tie CC68 Column Caps provide a high capacity connection between a 6x wide beam and a 8x post. CC68 Column Caps should be used when the 6x beam extends through the 8x post. Please...
Simpson Strong-Tie CC68 Column Caps provide a high capacity connection between a 6x wide beam and a 8x post. CC68 Column Caps should be used when the 6x beam extends through the 8x post. Please Note: This column cap is also available in powder coat or Hot Dipped Galvanized as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/2" (Beam) x 7-1/2" (Post) x 11" (Length) Fasteners: (4) 5/8"...
Simpson Strong-Tie ECCLRQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson...
Simpson Strong-Tie ECCLRQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ444HDG Information and...
Simpson Strong-Tie ECCO9 End Column Caps with no straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The ECCO9 End Column Caps comes with no coating to allow you...
Simpson Strong-Tie ECCO9 End Column Caps with no straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The ECCO9 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 8-7/8" (Beam) x...
Simpson Strong-Tie ECCQ5-6SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 6x post. ECCQ5-6SDS2.5 End Column Caps should be used when the beam ends at the...
Simpson Strong-Tie ECCQ5-6SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 6x post. ECCQ5-6SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ5-6SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call...
The Simpson Strong-Tie LPC6Z design allows you the flexibility to connect a 6x or smaller width beam or joist to the top of a 6x post. Sold By Each Material: 16 Gauge Post Width: 5-1/2" Finish:...
The Simpson Strong-Tie LPC6Z design allows you the flexibility to connect a 6x or smaller width beam or joist to the top of a 6x post. Sold By Each Material: 16 Gauge Post Width: 5-1/2" Finish: ZMax® G-185 Galvanized Fasteners: (8) 10d (Beam) , (8) 10d (Post) LPC6Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating (galvanized...
The Simpson Strong-Tie BCS2-2/4Z ZMax® allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose...
The Simpson Strong-Tie BCS2-2/4Z ZMax® allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: ZMax® G-185 Coating Dimensions 3-9/16" (Post Width) x 3-1/8" (Joists Width) Fastener Options: (14) 10d...
Simpson Strong-Tie CCO9 End Column Caps with no post straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The CCO9 Column Caps comes with no coating to allow you...
Simpson Strong-Tie CCO9 End Column Caps with no post straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The CCO9 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 8-7/8" (Beam) x 13"...
Simpson Strong-Tie CCQ5-6SDS2.5 Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 6x post. CCQ5-6SDS2.5 Column Caps should be used when the beam extends through the...
Simpson Strong-Tie CCQ5-6SDS2.5 Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 6x post. CCQ5-6SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ5-6SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...
The Simpson Strong-Tie BCS2-3/6 allows for the connection of (3) 2x's to a 6x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post...
The Simpson Strong-Tie BCS2-3/6 allows for the connection of (3) 2x's to a 6x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: Standard G90 Dimensions 5-9/16" (Post Width) x 4-5/8" (Joists Width) Fastener Options: (18) 16d Common BCS2-3/6...
Simpson Strong-Tie ECCLRQ464SDS End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x...
Simpson Strong-Tie ECCLRQ464SDS End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 5-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLRQ464SDS Information and Installation...
The Simpson Strong-Tie BCS2-3/6Z ZMax® allows for the connection of (3) 2x's to a 6x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose...
The Simpson Strong-Tie BCS2-3/6Z ZMax® allows for the connection of (3) 2x's to a 6x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: ZMax® G-185 Coating Dimensions 5-9/16" (Post Width) x 4-5/8" (Joists Width) Fastener Options: (18) 16d...
Simpson Strong-Tie ECC76 End Column Caps provide a high capacity connection between a 6-3/4" Glulam beam and a 6x post. ECC76 End Column Caps should be used when the 6-3/4" beam ends at the 6x post....
Simpson Strong-Tie ECC76 End Column Caps provide a high capacity connection between a 6-3/4" Glulam beam and a 6x post. ECC76 End Column Caps should be used when the 6-3/4" beam ends at the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 6-7/8" (Beam) x 5-1/2" (Post) x...
Simpson Strong-Tie ECCQ5-8SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 8x post. ECCQ5-8SDS2.5 End Column Caps should be used when the beam ends at the...
Simpson Strong-Tie ECCQ5-8SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 8x post. ECCQ5-8SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ5-8SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call...
Simpson Strong-Tie CC76 Column Caps provide a high capacity connection between a 6-3/4" GluLam beam and a 6x post. CC76 Column Caps should be used when the 6-3/4" beam extends through the 6x post....
Simpson Strong-Tie CC76 Column Caps provide a high capacity connection between a 6-3/4" GluLam beam and a 6x post. CC76 Column Caps should be used when the 6-3/4" beam extends through the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 6-7/8" (Beam) x 5-1/2" (Post) x 13"...