Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson BC4R Rough Post Caps allow you to create a light duty connection between a 4 x 4 rough post and 4x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 4" (W) x 4" (L) Fastener...
The Simpson BC4R Rough Post Caps allow you to create a light duty connection between a 4 x 4 rough post and 4x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 4" (W) x 4" (L) Fastener Options: (24) 16d common BC4R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
Simpson Strong-Tie CC44 Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44 Column Caps should be used when the 4x beam extends through the 4x post. Please...
Simpson Strong-Tie CC44 Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44 Column Caps should be used when the 4x beam extends through the 4x post. Please Note: This column cap is also available in powder coat and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 7" (Length) Fasteners: (2) 5/8"...
The Simpson Strong-Tie CPT88Z concealed 8 x 8 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the...
The Simpson Strong-Tie CPT88Z concealed 8 x 8 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 4-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT88Z is tested and load-rated...
Simpson Strong-Tie ECCLL464 End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint...
Simpson Strong-Tie ECCLL464 End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 5-1/2" (Posts) Fasteners: (6) 5/8" Diameter Machine Bolts ECCLL464 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect the product while it is being warehoused and in...
Simpson Strong-Tie ECCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4 End Column Caps comes with no coating to allow you...
Simpson Strong-Tie ECCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x...
Simpson Strong-Tie ECCOQ4-SDS2.5 Weld-On End Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel...
Simpson Strong-Tie ECCOQ4-SDS2.5 Weld-On End Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The column cap features a design without legs, enabling a field-welded attachment to steel columns and beams. The seat of the column cap provides additional surface area for bearing that extends beyond the side of the column. This helps distribute the load from the beam and provide support for the...
Simpson Strong-Tie ECCQ3-6SDS2.5 End Column Caps provide a high capacity connection between a 3-1/8" beam and a 6x post. ECCQ3-6SDS2.5 End Column Caps should be used when the beam ends at the post....
Simpson Strong-Tie ECCQ3-6SDS2.5 End Column Caps provide a high capacity connection between a 3-1/8" beam and a 6x post. ECCQ3-6SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ3-6SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...
The Simpson Strong-Tie EPC6Z post cap is designed with the post and beam flanges in-line so that the EPC6Z end post cap can accommodate (3) 6x post sizes. The EPC6Z now uses easier-to-install 10d...
The Simpson Strong-Tie EPC6Z post cap is designed with the post and beam flanges in-line so that the EPC6Z end post cap can accommodate (3) 6x post sizes. The EPC6Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough dimensional size as a manufactured...
The Simpson Strong-Tie ABU46Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46Z...
The Simpson Strong-Tie ABU46Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46Z features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 12 Gauge Strap Material: 12 Gauge Dimensions: (W)...
The Simpson Strong-Tie ABW46RZ for rough 4x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above...
The Simpson Strong-Tie ABW46RZ for rough 4x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW46RZ...
The Simpson AC4SS Type 316L Stainless Steel Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. Type 316L Stainless Steel protection provides additional corrosion...
The Simpson AC4SS Type 316L Stainless Steel Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. Type 316L Stainless Steel protection provides additional corrosion resistance when application is in extreme corrosion situations. Material: 18 Gauge Finish: Type 316L Stainless Steel Dimensions 3-9/16" (W) x 6-1/2" (L) Fastener Options: Beam...(8) .162 x 3-1/2" Nails (Min) Beam...(14) .162 x 3-1/2" Nails (Max) Post...(8) .162 x 3-1/2" Nails (Min) Post...(14) .162...
The Simpson Strong-Tie BC40SS Type 316L Stainless Steel Half Base is an easy way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. Type 316L Stainless Steel Corrosion Protection...
The Simpson Strong-Tie BC40SS Type 316L Stainless Steel Half Base is an easy way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. Type 316L Stainless Steel Corrosion Protection provides additional resistance to corrosive conditions. Base Material: 18 Gauge Dimensions: (W) 3-9/16" x (L) 3-1/4" x (H) 2-1/4" Finish: Type 316L Stainless Steel Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC40SS Information and Installation Instructions. Type 316L Connector Stainless Steel...
Simpson Strong-Tie CC44HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44HDG Column Caps should be used when the 4x beam extends...
Simpson Strong-Tie CC44HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44HDG Column Caps should be used when the 4x beam extends through the 4x post. Please Note: This column cap is also available in powder coat and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 7" (Length)...
Simpson Strong-Tie CCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The CCO4 Column Caps comes with no coating to allow you to...
Simpson Strong-Tie CCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The CCO4 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x 7"...
Simpson Strong-Tie CCOQ4-SDS2.5 Weld-On Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The...
Simpson Strong-Tie CCOQ4-SDS2.5 Weld-On Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The column cap features a design without legs, enabling a field-welded attachment to steel columns and beams. The seat of the column cap provides additional surface area for bearing that extends beyond the side of the column. This helps distribute the load from the beam and provide support for the...
Simpson Strong-Tie CCQ3-6SDS2.5 Column Caps provide a high capacity connection between a 3-1/8" beam and a 6x post. CCQ3-6SDS2.5 Column Caps should be used when the beam extends through the post....
Simpson Strong-Tie CCQ3-6SDS2.5 Column Caps provide a high capacity connection between a 3-1/8" beam and a 6x post. CCQ3-6SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ3-6SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...