Login/Register
Shopping Cart
OR
Filter
Sort By
Genuine Senco AX13EAA 1" Medium Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not...
Genuine Senco AX13EAA 1" Medium Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...
Simpson Strong Drive® SSNA8 1-1/2" x .131" Type 316 Stainless Steel nails are mostly used in stainless steel angle clips and straps to reach the load values that are required as well as...
Simpson Strong Drive® SSNA8 1-1/2" x .131" Type 316 Stainless Steel nails are mostly used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 150 nails in the 1 lb. pack. The nails are type 316 stainless steel providing high/severe corrosion protection. SSNA8 Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel chromium austenitic...
The Simpson Strong-Tie® Strong-Drive® SDWS221000DB .220" x 10" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects...
The Simpson Strong-Tie® Strong-Drive® SDWS221000DB .220" x 10" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects where a high-strength attachment is needed. The 0.220" diameter of the SDWS221000DB 10" wood screw requires less torque to install than comparable fasteners, making it easier to drive. The Double-Barrier Coating corrosion-resistant coating makes it suitable for many interior and exterior...
Simpson Strong-Tie CNW7/8-7/8-OST coupling nuts are a tested and load rated method to join 7/8" Hot Dipped Galvanized threaded rod or anchor bolts to 7/8" standard rod extensions. The "witness"...
Simpson Strong-Tie CNW7/8-7/8-OST coupling nuts are a tested and load rated method to join 7/8" Hot Dipped Galvanized threaded rod or anchor bolts to 7/8" standard rod extensions. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW7/8-7/8-OST meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. CNW7/8-7/8-OST Information and Data Standard...
Simpson Strong-Tie PDPAWL-250 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...
Simpson Strong-Tie PDPAWL-250 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 2-1/2" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...
The Simpson Strong-Drive® SDS25300SS-R25 1/4" x 3" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications....
The Simpson Strong-Drive® SDS25300SS-R25 1/4" x 3" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25300SS-R25 stainless steel screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 3" Thread Length: 2" Serrated Shank Diameter: 1/4"...
The THD37212CS6SS 3/8" x 2-1/2" Type 316 Stainless Steel Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring...
The THD37212CS6SS 3/8" x 2-1/2" Type 316 Stainless Steel Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile....
The THD37400H 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THD37400H 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
The Simpson Strong-Tie THD37500H6SS Type 316 Stainless Steel 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD37500H6SS Type 316 Stainless Steel 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie TNT25214H Titen Turbo™ 1/4" x 2-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT25214H Titen Turbo™ 1/4" x 2-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...
Cap fasteners like the STINGER® #136420 staples and caps are a recommended best practice installation by housewrap and roofing underlayment manufacturers like GAF, DuPont, Tyvek, Grace and...
Cap fasteners like the STINGER® #136420 staples and caps are a recommended best practice installation by housewrap and roofing underlayment manufacturers like GAF, DuPont, Tyvek, Grace and Titanium. Why? Because caps help seal out moisture that can penetrate sidewall and roofing fabrics. Caps provide better holding power than a nail or staple alone, and that means reduced blow-offs and lateral slippage! It also means fewer fasteners are needed to get the job done. 12 rolls of 168 collated...
The Intercorp Strong-Point 2" x #6 Yellow Zinc Coarse Phillips Bugle Drywall Screws are a specialized type of fastener designed for attaching drywall (also known as gypsum board or sheetrock) to...
The Intercorp Strong-Point 2" x #6 Yellow Zinc Coarse Phillips Bugle Drywall Screws are a specialized type of fastener designed for attaching drywall (also known as gypsum board or sheetrock) to wood or steel framing during both residential and commercial construction. Drywall fasteners can also used for other applications, such as attaching drywall to furring strips and installing drywall to existing walls and ceilings during renovations. These drywall fasteners offer several design features...
1" - 1 Zinc Plated Hex Nuts for either 1" machine bolts or all thread rod. Uses 1-1/2" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or...
1" - 1 Zinc Plated Hex Nuts for either 1" machine bolts or all thread rod. Uses 1-1/2" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or threaded rod. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...
1" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should...
1" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 1" Inside Diameter: 1-1/16" Outside Diameter: 2-1/2" Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
These 5/8" x 5" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread Length...
These 5/8" x 5" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of...
This 2-1/2" x .162" Hot Dipped Galvanized Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like...
This 2-1/2" x .162" Hot Dipped Galvanized Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please...