Refine Search By Filter(s)

Simpson Strong Tie DTT1Z Deck Ties
Price: $3.52
Availability: Stock
Simpson Strong-Tie Item #: DTT1Z -

    The Simpson Strong-Tie DTT1Z Deck Tension Tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie addresses a 2015 International Residential Code provision (section R507.2.4) that now allows four 750 lb. lateral connectors to be fastened to framing in the house with a lag screw. This provision is an alternative to using two 1,500 lb. lateral connections from the deck to the floor joists within the...

    Simpson Strong Tie DTT1Z-KT Deck Tie Connector Kit
    Price: $48.05
    Availability: Stock
    Simpson Strong-Tie Item #: DTT1Z-KT -

      The Simpson Strong-Tie DTT1Z Deck Tension Tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie addresses a 2015 International Residential Code provision (section R507.2.4) that now allows four 750 lb. lateral connectors to be fastened to framing in the house with a lag screw. This provision is an alternative to using two 1,500 lb. lateral connections from the deck to the floor joists within the...

      Simpson Strong Tie DTT2Z Deck Post Connectors
      Price: $12.98
      Availability: Stock
      Simpson Strong-Tie Item #: DTT2Z -

        The Simpson Strong-Tie DTT2Z ZMax® Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the deck to the house....

        Simpson Strong Tie DTT2Z Deck Post Connectors
        Price: $14.00
        Availability: Ships Direct
        Simpson Strong-Tie Item #: DTT2Z-SDS2.5 -

          The Simpson Strong-Tie DTT2Z-SDS2.5 ZMax® Tension Tie with 2-1/2" Screws is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the...

          Simpson Strong Tie DTT2SS Deck Post Connectors
          Price: $38.33
          Availability: Ships Direct
          Simpson Strong-Tie Item #: DTT2SS -

            The Simpson Strong-Tie DTT2SS Type 316L Stainless Steel Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2SS also complies with the new IRC requirements for laterally tying the deck to...

            Simpson Strong-Tie LTTP2 Light Tension Ties
            Price: $19.68
            Availability: Ships Direct
            Simpson Strong-Tie Item #: LTTP2 -

              The Simpson Strong-Tie LTTP2 Light Tension Tie is designed for wood joist attachments to concrete or masonry. The LTTP2 features an extruded anchor bolt hole to accommodate 1/2", 5/8" and 3/4" bolt diameters. It also features two separate nailing patterns: obround holes spaced 3" apart for I-joist purlins and square holes spaced to accommodate the narrow face of 2x solid-sawn purlins. The LTTP2 may be installed vertically on the wide face of a minimum 2x4 stud for holdown applications and can...

              Simpson LTTI31 Tension Ties
              Price: $82.72
              Availability: Ships Direct
              Simpson Strong-Tie Item #: LTTI31 -

                The Simpson Strong-Tie LTTI31 Light Tension Tie is designed to attach wood chord open wen trusses to concrete or masonry walls. The may also be installed vertically as long as they are attached to a minimum 2 x 6 stud. If the base of the LTTI31 tie is flush with the concrete or masonry wall the allowable tension load increases (use link below for more information). Strap Material: 18 Gauge Plate Material: 3 Gauge Finish: Standard G90 Zinc Width: 3-3/4" Length: 31" Anchor Bolt: 5/8" Fastener...

                Simpson HTT4 Tension Ties
                Price: $23.53
                Availability: Stock
                Simpson Strong-Tie Item #: HTT4 -

                  The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc Width: 2-1/2" Length: 12-3/8" Anchor Bolt: 5/8" Fastener...

                  Simpson HTT4HDG Hot Dipped Galvanized Tension Ties
                  Price: $38.09
                  Availability: Ships Direct
                  Simpson Strong-Tie Item #: HTT4HDG -

                    The Simpson Strong-Tie HTT4HDG Hot Dipped Galvanized Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. Hot dipped galvanizing provides added protection when install hardware to ACQ lumber. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4HDG Tension Ties are designed to be used in both in vertical and horizontal...

                    Simpson HTT5 Tension Ties
                    Price: $29.36
                    Availability: Stock
                    Simpson Strong-Tie Item #: HTT5 -

                      The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Using a BP58-2 bearing plate installed in the seat of the HTT5 provides add more allowable tension load to the connection. HTT5 Tension Ties are designed to be used in both in vertical and...

                      Simpson HTT5 Tension Ties
                      Price: $29.61
                      Availability: Ships Direct
                      Simpson Strong-Tie Item #: HTT5-3/4 -

                        The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard...

                        Simpson HTT5KT Tension Ties
                        Price: $43.68
                        Availability: Ships Direct
                        Simpson Strong-Tie Item #: HTT5KT -

                          The Simpson Strong-Tie HTT5KT Tension Tie Kit includes (1) HTT5 Tension Tie, (1) BP58-2 Bearing Plate and (26) SD #10 x 2-1/2" Screws. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT5 Tension Ties are designed to be used in both in vertical and horizontal applications. Using this kit will provide maximum tension load when required. Strap Material: 11 Gauge HTT5 Finish:...

                          Simpson HTT5HDG Tension Ties
                          Price: $48.05
                          Availability: Ships Direct
                          Simpson Strong-Tie Item #: HTT5HDG -

                            The Simpson Strong-Tie HTT5HDG Hot Dipped Galvanized Tension Tie has added protection for use in areas where corrosion maycause problems like ACQ lumber. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Using a BP58-2 bearing plate installed in the seat of the HTT5 provides add more allowable tension load to the connection. HTT5 Tension Ties are designed to be used in both in...

                            Simpson Strong-Tie DTT, LTT and HTT Horizontal and Vertical Tension Ties