Products 1-20 of 20
Show
Availability: Stock
Simpson Strong-Tie
Item #: SSTB16 -
The SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 17-5/8" Minimum Embedment: 12-5/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Stock
Simpson Strong-Tie
Item #: SSTB16L -
The SSTB16L (5/8" Diameter by 19-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 19-5/8" Minimum Embedment: 12-5/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB16HDG -
The SSTB16HDG Hot Dipped Galvanized (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 17-5/8" Minimum Embedment: 12-5/8" Finish: Hot Dipped Galvanized...
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB16LHDG -
The SSTB16LHDG Hot Dipped Galvanized (5/8" Diameter by 19-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 19-5/8" Minimum Embedment: 12-5/8" Finish: Hot Dipped Galvanized...
Availability: Stock
Simpson Strong-Tie
Item #: SSTB20 -
The SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 21-5/8" Minimum Embedment: 16-5/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Stock
Simpson Strong-Tie
Item #: SSTB20L -
The SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum Embedment: 16-5/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Stock
Simpson Strong-Tie
Item #: SSTB20HDG -
The SSTB20HDG Hot Dipped Galvanized (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 21-5/8" Minimum Embedment: 16-5/8" Finish: Hot Dipped Galvanized...
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB20LHDG -
The SSTB20LHDG Hot Dipped Galvanized (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum Embedment: 16-5/8" Finish: Hot Dipped Galvanized...
Availability: Stock
Simpson Strong-Tie
Item #: SSTB24 -
The SSTB24 (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 25-5/8" Minimum Embedment: 20-5/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Stock
Simpson Strong-Tie
Item #: SSTB24L -
The SSTB24L (5/8" Diameter by 28-1/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 28-1/8" Minimum Embedment: 20-5/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Stock
Simpson Strong-Tie
Item #: SSTB24HDG -
The SSTB24HDG Hot Dipped Galvanized (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 25-5/8" Minimum Embedment: 20-5/8" Finish: Hot Dipped Galvanized...
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB24LHDG -
The SSTB24LHDG Hot Dipped Galvanized (5/8" Diameter by 28-1/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 28-1/8" Minimum Embedment: 20-5/8" Finish: Hot Dipped Galvanized...
Availability: Stock
Simpson Strong-Tie
Item #: SSTB28 -
The SSTB28 (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 29-7/8" Minimum Embedment: 24-7/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB28L -
The SSTB28L (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 32-7/8" Minimum Embedment: 24-7/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Stock
Simpson Strong-Tie
Item #: SSTB28HDG -
The SSTB28HDG Hot Dipped Galvanized (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 29-7/8" Minimum Embedment: 24-7/8" Finish: Hot Dipped Galvanized...
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB28LHDG -
The SSTB28LHDG Hot Dipped Galvanized (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 32-7/8" Minimum Embedment: 24-7/8" Finish: Hot Dipped Galvanized...
Availability: Stock
Simpson Strong-Tie
Item #: SSTB34 -
The SSTB34 (7/8" Diameter by 34-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 34-7/8" Minimum Embedment: 28-7/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB34HDG -
The SSTB34HDG Hot Dipped Galvanized (7/8" Diameter by 34-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 34-7/8" Minimum Embedment: 28-7/8" Finish: Hot Dipped Galvanized...
Availability: Stock
Simpson Strong-Tie
Item #: SSTB36 -
The SSTB36 (7/8" Diameter by 36-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 36-7/8" Minimum Embedment: 28-7/8" Finish: None Rolled threads for higher tensile capacity....
Availability: Ships Direct
Simpson Strong-Tie
Item #: SSTB36HDG -
The SSTB36HDG Hot Dipped Galvanized (7/8" Diameter by 36-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 36-7/8" Minimum Embedment: 28-7/8" Finish: Hot Dipped Galvanized...