Simpson Strong-Tie

Simpson Strong-Tie MSTA12 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x...

Simpson Strong-Tie MSTA12 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x 1-1/2" Screws...

Simpson Strong-Tie LSTA12 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x...

Simpson Strong-Tie LSTA12 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x 1-1/2" Screws...

The Simpson Strong-Tie CJT3ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a...

The Simpson Strong-Tie CJT3ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 8 Glulam Beam - 5-1/8" x 7-1/2" Material: 12 Gauge Finish:...

Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging...

Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS1.81/11.88 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

Simpson Strong Tie HGUS26-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are...

Simpson Strong Tie HGUS26-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are designed to accept two 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/16" (Wide) x 5-7/16" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed...

Simpson Strong-Tie CCO3 1/4 Column Caps with no post straps provides a high capacity connection between a 3-1/8" wide beam and a steel post. The CCO3 1/4 Column Caps comes with no coating to allow...

Simpson Strong-Tie CCO3 1/4 Column Caps with no post straps provides a high capacity connection between a 3-1/8" wide beam and a steel post. The CCO3 1/4 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-1/8" (Beam) x...

Simpson Strong-Tie HL33HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33HDG to connect lumber...

Simpson Strong-Tie HL33HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL33HDG Heavy Angle Information...

The Simpson Strong-Tie LS30Z Skewable Reinforcing Angles with ZMax® Protective Coating is field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS30Z...

The Simpson Strong-Tie LS30Z Skewable Reinforcing Angles with ZMax® Protective Coating is field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS30Z Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Zmax® Coating Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" Nails LS30Z Information and...

Simpson Strong-Tie N8D5HDG-R 1-1/2" x .131" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. The nails are hot dipped...

Simpson Strong-Tie N8D5HDG-R 1-1/2" x .131" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. The nails are hot dipped galvanized, providing medium corrosion protection. N8D5HDG-R Information and Data Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average coating weight is 2.0 oz./ft2 (per ASTM A123...

Head is Painted Dark Brown! The Simpson Strong-Tie 2-1/4" x .092" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood...

Head is Painted Dark Brown! The Simpson Strong-Tie 2-1/4" x .092" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Dark Brown Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

Simpson Strong-Tie Avant Outdoor Accents® APVA21 angles tie together beams, rafters and more. The APVA21 angle makes structural connections between beams and posts much more visually appealing....

Simpson Strong-Tie Avant Outdoor Accents® APVA21 angles tie together beams, rafters and more. The APVA21 angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. The Avant Collection features straight edges and chamfered corners for a clean, timeless design. Install with Outdoor Accents® structural screws and hex-head washer (sold...

Simpson Strong-Tie HRS8 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value....

Simpson Strong-Tie HRS8 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/8" (Wide) x 8" (Length) Fastener Options: (10) .148" x 2-1/2" Nails or (10) SD9112 Structural Screws HRS8 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

The Simpson Strong-Tie APVDJT2-4 Avant Outdoor Accents® Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents...

The Simpson Strong-Tie APVDJT2-4 Avant Outdoor Accents® Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. The Avant Collection features straight edges and chamfered corners for a clean, timeless design. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood...

Simpson Strong-Tie Avant Outdoor Accents® flat APVL4 "L" straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APVL4 "L"...

Simpson Strong-Tie Avant Outdoor Accents® flat APVL4 "L" straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APVL4 "L" provide reinforcement for a connection where two 4x or larger lumber pieces intersect at a 90-degree angle. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. The Avant Collection features straight edges and chamfered corners for a clean, timeless design Install...

The Simpson Strong-Tie VPA25 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-3/4" wide rafters to the top plate. It will adjust to accommodate...

The Simpson Strong-Tie VPA25 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-3/4" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 1-13/16" Actual Joist Width: 1-3/4"...

The Simpson Strong-Drive® SDS25112SS-R25 1/4" x 1-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood...

The Simpson Strong-Drive® SDS25112SS-R25 1/4" x 1-1/2" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112SS-R25 stainless steel screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 1-1/2" Thread Length: 1" Serrated Shank...

The Simpson Strong-Tie THDB25234CS 1/4" x 2-3/4" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...

The Simpson Strong-Tie THDB25234CS 1/4" x 2-3/4" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...

Simpson Strong-Tie CNW5/8-5/8-OST coupling nuts are a tested and load rated method to join 5/8" Hot Dipped Galvanized threaded rod or anchor bolts to 5/8" standard rod extensions. The "witness"...

Simpson Strong-Tie CNW5/8-5/8-OST coupling nuts are a tested and load rated method to join 5/8" Hot Dipped Galvanized threaded rod or anchor bolts to 5/8" standard rod extensions. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW5/8-5/8-OST meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. CNW5/8-5/8-OST Information and Data...

Simpson Strong-Tie Outdoor Accents® APHH46R concealed flange heavy hangers connect rough sawn 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges...

Simpson Strong-Tie Outdoor Accents® APHH46R concealed flange heavy hangers connect rough sawn 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APHH46R heavy hanger installs easily with the Outdoor Accents® SDWS22312DBB connector screws and STN22 hex-head washers. Use Strong-Drive SDS25300 Heavy-Duty Connector screws to connect to the header Install with Outdoor...

Simpson Strong-Tie Outdoor Accents® APLH24R 2 x 4 rough sawn concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a...

Simpson Strong-Tie Outdoor Accents® APLH24R 2 x 4 rough sawn concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APLH24R hanger installs easily with the Outdoor Accents® connector screw. Install with Outdoor Accents® SD10112DBB structural screws for a decorative look and meet required load values. Designed for use with 2x4 rough sawn joists. Material:...

The THDB25234H 1/4" x 2-3/4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal...

The THDB25234H 1/4" x 2-3/4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The...

The Simpson Strong-Tie LSSJ26RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes...

The Simpson Strong-Tie LSSJ26RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie HGA10HDG Hot Dipped Galvanized Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Use Hot...

The Simpson Strong-Tie HGA10HDG Hot Dipped Galvanized Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Use Hot Dipped Galvanized HGA10 angles when you need additional corrosion protection. Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws. Material: 14 Gauge Finish: Hot Dipped Galvanized/li> Fasteners included: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10HDG Information and...

The Simpson Strong-Tie SDWS22312DBB .220 x 3-1/2" Outdoor Accents® structural wood screw reduces installation time by driving easily without pre-drilling. When combined with the patent-pending,...

The Simpson Strong-Tie SDWS22312DBB .220 x 3-1/2" Outdoor Accents® structural wood screw reduces installation time by driving easily without pre-drilling. When combined with the patent-pending, load-rated Outdoor Accents STN22 structural washer, the solution delivers the decorative appearance of a bolt connection but with a much easier installation. The structural screw and washer are sold separately from each other and from the Outdoor Accents connectors. The screw's bold thread design...