Simpson Strong-Tie

The Simpson MIU3.56/18 hanger is designed to hang 3-1/2" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/18 features positive-angle...

The Simpson MIU3.56/18 hanger is designed to hang 3-1/2" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/18 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie THD50800H4SS Type 304 Stainless Steel 1/2" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THD50800H4SS Type 304 Stainless Steel 1/2" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

The Simpson Strong-Tie 2-1/2" x 20" HIT320 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...

The Simpson Strong-Tie 2-1/2" x 20" HIT320 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. The HIT also features extra triangle holes to allow higher uplift loads. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie 2-1/2" x 22" HIT322 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...

The Simpson Strong-Tie 2-1/2" x 22" HIT322 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. The HIT also features extra triangle holes to allow higher uplift loads. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie HSUL210-2 Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally...

The Simpson Strong-Tie HSUL210-2 Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-1/4" (Outside Flange) x 2-3/16" (Inside Flange) Fastener Options : (20) .162 x 3-1/2" 16d Nails...

The Simpson Strong-Tie TNT25400H Titen Turbo™ 1/4" x 4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the...

The Simpson Strong-Tie TNT25400H Titen Turbo™ 1/4" x 4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and snapping....

Simpson Strong Tie U44 4 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...

Simpson Strong Tie U44 4 x 4 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 2-7/8" (Height) x 2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 3" 10d Nails (Joist) U44 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...

The Simpson Strong-Tie HU410TF is a hybrid 4 x 10 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...

The Simpson Strong-Tie HU410TF is a hybrid 4 x 10 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 9-1/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (14)...

Simpson Strong-Tie CB88R rough column bases are used to provide a connection of a 8 x 8 rough sawn (8" x 8") post to concrete. The CB88R base is installed during the pouring of the concrete. Strap...

Simpson Strong-Tie CB88R rough column bases are used to provide a connection of a 8 x 8 rough sawn (8" x 8") post to concrete. The CB88R base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (8" x 8") Fasteners: (2) 3/4" Machine Bolts CB88R Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect the...

The Simpson Strong-Tie HTSM20 14ga. x 20" Medium Twist Strap Masonry Tie offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at...

The Simpson Strong-Tie HTSM20 14ga. x 20" Medium Twist Strap Masonry Tie offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at the transition points between the two members. The HTSM is load rated for installation on both grout-filled CMU (GFCMU) and concrete. Straps do not need to be wrapped over the truss to achieve the allowable load Can be field bent once to a 45° angle Material: 14 gauge Finish: Standard G90...

The Simpson Strong-Tie SPH8 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the...

The Simpson Strong-Tie SPH8 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. Load rated Designed to resist wind and seismic forces Does not require top or bottom track attachment...

The THD50600HMG Mechanical Galvanized 1/2" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...

The THD50600HMG Mechanical Galvanized 1/2" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...

Simpson Strong Tie HUCQ610Z-SDSG ZMax® 5-1/2" Wide 6 x 10 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ610Z-SDSG ZMax® hangers with...

Simpson Strong Tie HUCQ610Z-SDSG ZMax® 5-1/2" Wide 6 x 10 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ610Z-SDSG ZMax® hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 5-1/2" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...

Simpson Strong-Tie Avant Outdoor Accents® APVB1010 post bases secure a 10 x 10 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other...

Simpson Strong-Tie Avant Outdoor Accents® APVB1010 post bases secure a 10 x 10 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature a clean, simple design and provide ZMAX® galvanization with black powder coat for extra corrosion resistance. APVB1010 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. The Avant Collection features straight edges...

The Simpson Strong-Tie PAB6-18 3/4" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB6-18 3/4" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

Simpson Strong Tie HGUS5.50/14 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...

Simpson Strong Tie HGUS5.50/14 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 12-1/2" (Height) x 4" (Seat Depth) Fastener Options: (66) 16d Nails (Header) (22) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS5.50/14 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

Simpson Strong-Tie ECCLR666 End Corner Column Caps provide a right connection between (2) 6x beams and (1) 6 x 6 posts when both beams end at the post. Please Note: This column cap may be available...

Simpson Strong-Tie ECCLR666 End Corner Column Caps provide a right connection between (2) 6x beams and (1) 6 x 6 posts when both beams end at the post. Please Note: This column cap may be available in Hot Dipped Galvanized as a special order. Additionally, multiple configurations can be manufactured up to 8x sizes. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 5-1/2"...

Simpson Strong-Tie IUS2.56/11.88 is used to install 2-1/2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging...

Simpson Strong-Tie IUS2.56/11.88 is used to install 2-1/2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-5/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.56/11.88 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

Simpson Strong Tie HUC210-2 Double 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...

Simpson Strong Tie HUC210-2 Double 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC210-2 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work....

Simpson Strong Tie LUS210 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...

Simpson Strong Tie LUS210 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210 2 x 10/12 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-13/16" (Height) x 1-3/4" (Seat...

Simpson Strong-Tie ECC88 End Column Caps provide a high capacity connection between a 8x beam and a 8x post. ECC88 End Column Caps should be used when the 8x beam ends at the 8x post. Please Note:...

Simpson Strong-Tie ECC88 End Column Caps provide a high capacity connection between a 8x beam and a 8x post. ECC88 End Column Caps should be used when the 8x beam ends at the 8x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 7-1/2" (Beam) x 7-1/2" (Post) x 10-1/2" (Length)...

Simpson Strong-Tie HL73 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL73 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL73 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL73 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with hot dipped galvanized or black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 7-1/4" (W1) x 7-1/4" (W2) x...

The Simpson Strong-Tie SSTB28HDG Hot Dipped Galvanized (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...

The Simpson Strong-Tie SSTB28HDG Hot Dipped Galvanized (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 29-7/8" Minimum Embedment: 24-7/8" Finish: Hot...

Simpson Strong-Tie H8Z ZMax® Hurricane Tie for attaching double top plates to a rafter, stud to a sill plate or I-joist to double top plates. The H8Z Tie uses (10) 10d .148" x 1-1/2" joist nails...

Simpson Strong-Tie H8Z ZMax® Hurricane Tie for attaching double top plates to a rafter, stud to a sill plate or I-joist to double top plates. The H8Z Tie uses (10) 10d .148" x 1-1/2" joist nails or SD #9 x 1-1/2" Structural Screws. Material: 18 Gauge Finish: ZMax® G-185 Coating Fastener Options: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2" Screws H8Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per...