Simpson Strong-Tie

Simpson Strong Tie U314 3 x 14/16 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material:...

Simpson Strong Tie U314 3 x 14/16 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 10-1/2" (Height) x 2" (Seat Depth) Fastener Options: (16) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 1-1/2" 10d Nails (Joist) U314 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

Simpson Strong Tie HU210 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...

Simpson Strong Tie HU210 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 2-1/4" (Seat Depth) Fasteners: (8) .162 x 3-1/2" (16d) Nails (Header) (4) .148 x 1-1/2" (10d) Nails (Joist) HU210 Information and...

The Simpson Strong-Tie SPH4Z ZMax® Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears...

The Simpson Strong-Tie SPH4Z ZMax® Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. ZMax® coating provides corrosion resistance when required. Load rated Designed to resist...

The Simpson MIU3.56/11 hanger is designed to hang 3-1/2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/11 features...

The Simpson MIU3.56/11 hanger is designed to hang 3-1/2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie THD50600H6SS Type 316 Stainless Steel 1/2" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THD50600H6SS Type 316 Stainless Steel 1/2" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

The Simpson Strong-Tie HU48TF is a hybrid 4 x 8 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that...

The Simpson Strong-Tie HU48TF is a hybrid 4 x 8 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 7-1/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (12)...

The Simpson Strong-Tie MTSM20 16ga. x 20" Medium Twist Strap Masonry Tie offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at...

The Simpson Strong-Tie MTSM20 16ga. x 20" Medium Twist Strap Masonry Tie offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at the transition points between the two members. The MTSM is load rated for installation on both grout-filled CMU (GFCMU) and concrete. Straps do not need to be wrapped over the truss to achieve the allowable load Can be field bent once to a 45° angle Material: 16 gauge Finish: Standard G90...

The Simpson Strong-Tie HUC48TF is a hybrid 4 x 8 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two...

The Simpson Strong-Tie HUC48TF is a hybrid 4 x 8 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two concealed flanges for end-of-wall or corner installation. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 7-1/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (12)...

The Simpson MIU3.56/14 hanger is designed to hang 3-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/14 features positive-angle...

The Simpson MIU3.56/14 hanger is designed to hang 3-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie SPH6 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the...

The Simpson Strong-Tie SPH6 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. SPH6R can be special ordered when the strap needs to be connected to a 1/2" shear wall also. Load rated...

Save by Purchasing a Quantity of 8 Boxes (400 Pieces)! Simpson Strong Tie HU210 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist...

Save by Purchasing a Quantity of 8 Boxes (400 Pieces)! Simpson Strong Tie HU210 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 2-1/4" (Seat Depth) Fasteners: (8) .162 x 3-1/2" (16d) Nails (Header) (4) .148 x...

Simpson Strong Tie HGUS5.50/10 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...

Simpson Strong Tie HGUS5.50/10 5-1/2" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 8-15/16" (Height) x 4" (Seat Depth) Fastener Options: (46) 16d Nails (Header) (16) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS5.50/10 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

The Simpson Strong-Tie SUL210-2 Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally...

The Simpson Strong-Tie SUL210-2 Skewed Left Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist ends may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (14) .162 x 3-1/2" 16d Nails...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/14 sets a new standard for engineered wood top flange hangers. The ITS2.37/14 installs 2-5/16" x 14" I-Joists...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/14 sets a new standard for engineered wood top flange hangers. The ITS2.37/14 installs 2-5/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to...

The Simpson Strong-Tie 2-1/2" x 18" MIT318 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...

The Simpson Strong-Tie 2-1/2" x 18" MIT318 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie HTS20 14ga. x 20" Heavy Twist Strap HTS20 provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of...

The Simpson Strong-Tie HTS20 14ga. x 20" Heavy Twist Strap HTS20 provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS20 has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 20" (Length)...

Simpson Strong-Tie Mission Outdoor Accents® APB1010R post bases secure a rough sawn 10 x 10 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and...

Simpson Strong-Tie Mission Outdoor Accents® APB1010R post bases secure a rough sawn 10 x 10 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization for extra corrosion resistance. Base includes black powder coating for a decorative look. APB1010R bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture....

The Simpson Strong-Tie PAB6-12 3/4" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB6-12 3/4" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

The Simpson Strong-Tie TNT25334H Titen Turbo™ 1/4" x 3-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...

The Simpson Strong-Tie TNT25334H Titen Turbo™ 1/4" x 3-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...

The Simpson Strong-Tie THD50612H4SS Type 304 Stainless Steel 1/2" x 6-1/2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THD50612H4SS Type 304 Stainless Steel 1/2" x 6-1/2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

Simpson Strong-Tie HL57 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL57 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL57 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL57 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a gusset, hot dipped galvanized or powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 5-3/4" (W1) x...

The THD50500HMG Mechanical Galvanized 1/2" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...

The THD50500HMG Mechanical Galvanized 1/2" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...

The Simpson Strong-Tie SSTB28 (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...

The Simpson Strong-Tie SSTB28 (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 29-7/8" Minimum Embedment: 24-7/8" Finish: None Rolled threads for higher...

Save by Purchasing a Quantity of 10 Boxes (40 Pieces)! Simpson Strong-Tie CB88 column bases are used to provide a connection of a 8 x 8 (7-1/2" x 7-1/2") post to concrete. The CB88 base is installed...

Save by Purchasing a Quantity of 10 Boxes (40 Pieces)! Simpson Strong-Tie CB88 column bases are used to provide a connection of a 8 x 8 (7-1/2" x 7-1/2") post to concrete. The CB88 base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (7-1/2" x 7-1/2") Fasteners: (2) 3/4" Machine Bolts CB88 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is...