Login/Register
Shopping Cart
OR
Simpson Strong-Tie ECCQ5-8SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 8x post. ECCQ5-8SDS2.5 End Column Caps should be used when the beam ends at the...
Simpson Strong-Tie ECCQ5-8SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 8x post. ECCQ5-8SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ5-8SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call...
The Simpson Strong-Tie TNT25314TF Titen Turbo™ 1/4" x 3-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the...
The Simpson Strong-Tie TNT25314TF Titen Turbo™ 1/4" x 3-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping...
The Simpson Strong-Tie BCS2-3/6Z ZMax® allows for the connection of (3) 2x's to a 6x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose...
The Simpson Strong-Tie BCS2-3/6Z ZMax® allows for the connection of (3) 2x's to a 6x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: ZMax® G-185 Coating Dimensions 5-9/16" (Post Width) x 4-5/8" (Joists Width) Fastener Options: (18) 16d...
Simpson Strong Tie U36 3 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U36 3 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 5-3/8" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U36 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
The Simpson S15N250SFN 2-1/2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...
The Simpson S15N250SFN 2-1/2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...
Simpson Strong Drive® SSA16D5 3-1/2" x .162" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required...
Simpson Strong Drive® SSA16D5 3-1/2" x .162" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 200 nails in the 5 lb. pack. The nails are type 316 stainless steel providing high/severe corrosion protection. SSA16D Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel...
Simpson Strong-Tie MSTA36SS Type 316L Stainless Steel 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be...
Simpson Strong-Tie MSTA36SS Type 316L Stainless Steel 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-1/4" (Wide) x 36" (Length) Fasteners: (26) 10d...
The Simpson T15N250SFB 2-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...
The Simpson T15N250SFB 2-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...
The Simpson T15N250SFN 2-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...
The Simpson T15N250SFN 2-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...
The Simpson Strong-Tie THD50600H4SS Type 304 Stainless Steel 1/2" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD50600H4SS Type 304 Stainless Steel 1/2" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson MIU3.56/9 hanger is designed to hang 3-1/2" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/9 features...
The Simpson MIU3.56/9 hanger is designed to hang 3-1/2" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU3.56/9 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong Tie U310 3 x 10/12 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material:...
Simpson Strong Tie U310 3 x 10/12 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 8-7/8" (Height) x 2" (Seat Depth) Fastener Options: (14) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 1-1/2" 10d Nails (Joist) U310 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.37/11.88 installs 2-5/16" x 11-7/8"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.37/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.37/11.88 installs 2-5/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/14 is used to install 2-5/16" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/14 is used to install 2-5/16" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (10)...
The Simpson Strong-Tie TNT18334H Titen Turbo™ 3/16" x 3-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT18334H Titen Turbo™ 3/16" x 3-3/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...
Simpson Strong-Tie CCQ5-8SDS2.5 Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 8x post. CCQ5-8SDS2.5 Column Caps should be used when the beam extends through the...
Simpson Strong-Tie CCQ5-8SDS2.5 Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 8x post. CCQ5-8SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ5-8SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...
The Simpson Strong-Tie MTS20SS 1-1/4" Wide x 20" Long Stainless Steel Medium Twist Strap provides a tension connection between two members. This twist strap resists moderate uplift loads at the...
The Simpson Strong-Tie MTS20SS 1-1/4" Wide x 20" Long Stainless Steel Medium Twist Strap provides a tension connection between two members. This twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS20 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-1/4" (Wide) x 20"...
The Simpson Strong-Tie SPH4 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the...
The Simpson Strong-Tie SPH4 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. SPH4R can be special ordered when the strap needs to be connected to a 1/2" shear wall also. Load rated...
The Simpson Strong-Tie® RTU2 Rigid Tie® Connector is designed for connecting intersecting members in wood construction applications. Manufactured to high-quality standards to ensure solid...
The Simpson Strong-Tie® RTU2 Rigid Tie® Connector is designed for connecting intersecting members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this U-shaped rigid tie features a G90 galvanized finish for added corrosion resistance. The versatile RTU2 is ideal for a variety of projects including fences, railings and utility furniture or any application where a 2x member crosses another. Fastens with Simpson Strong-Tie®...
The Simpson Strong-Tie SUR210SS Type 316L Stainless Steel Skewed Right 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers...
The Simpson Strong-Tie SUR210SS Type 316L Stainless Steel Skewed Right 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. Stainless Steel provides additional corrosion protection when required. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 8-1/8" (Height) x 1-1/8"...
The THD50400HMG Mechanical Galvanized 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...
The THD50400HMG Mechanical Galvanized 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...
Simpson Strong Tie LUS28-2SS Type 316L Stainless steel 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...
Simpson Strong Tie LUS28-2SS Type 316L Stainless steel 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28-2SS Double 2 x 8 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions: 3-1/8" (Wide) x...
The Simpson Strong-Tie PAB5-36 5/8" x 36" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB5-36 5/8" x 36" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
Simpson Strong Drive® SSA16DB 3-1/2" x .162" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required...
Simpson Strong Drive® SSA16DB 3-1/2" x .162" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 1000 nails in the 25 lb. bucket. The nails are type 316 stainless steel providing high/severe corrosion protection. SSA16DB Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel...