Simpson Strong-Tie

Simpson Strong Tie LUS28Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...

Simpson Strong Tie LUS28Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28Z 2 x 8 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 6-5/8" (Height) x 1-3/4"...

The Simpson Strong-Tie HU44TF is a hybrid 4 x 4 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that...

The Simpson Strong-Tie HU44TF is a hybrid 4 x 4 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 3-7/16" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (8)...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/9.5 is used to install 2-5/16" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/9.5 is used to install 2-5/16" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.37/9.5 Information and Installation...

The Simpson MIU2.56/14 hanger is designed to hang 2-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/14 features positive-angle...

The Simpson MIU2.56/14 hanger is designed to hang 2-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

Simpson Strong Tie HUC28-2SS Stainless Steel Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed...

Simpson Strong Tie HUC28-2SS Stainless Steel Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-2SS Stainless Steel hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where...

Simpson Strong-Tie CB68 column bases are used to provide a connection of a 6 x 8 (5-1/2" x 7-1/2") post to concrete. The CB68 base is installed during the pouring of the concrete. Strap Material: 7...

Simpson Strong-Tie CB68 column bases are used to provide a connection of a 6 x 8 (5-1/2" x 7-1/2") post to concrete. The CB68 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 7-1/2") Fasteners: (2) 5/8" Machine Bolts CB68 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

Simpson Strong-Tie CC68 Column Caps provide a high capacity connection between a 6x wide beam and a 8x post. CC68 Column Caps should be used when the 6x beam extends through the 8x post. Please...

Simpson Strong-Tie CC68 Column Caps provide a high capacity connection between a 6x wide beam and a 8x post. CC68 Column Caps should be used when the 6x beam extends through the 8x post. Please Note: This column cap is also available in powder coat or Hot Dipped Galvanized as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/2" (Beam) x 7-1/2" (Post) x 11" (Length) Fasteners: (4) 5/8"...

The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of...

The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard...

Simpson Strong-Tie ECCLRQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson...

Simpson Strong-Tie ECCLRQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ444HDG Information and...

Simpson Strong-Tie ECCO9 End Column Caps with no straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The ECCO9 End Column Caps comes with no coating to allow you...

Simpson Strong-Tie ECCO9 End Column Caps with no straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The ECCO9 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 8-7/8" (Beam) x...

Simpson Strong-Tie ECCQ5-6SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 6x post. ECCQ5-6SDS2.5 End Column Caps should be used when the beam ends at the...

Simpson Strong-Tie ECCQ5-6SDS2.5 End Column Caps provide a high capacity connection between a 5-1/8" Glulam Beam and a 6x post. ECCQ5-6SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ5-6SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call...

The Simpson Strong-Tie LPC6Z design allows you the flexibility to connect a 6x or smaller width beam or joist to the top of a 6x post. Sold By Each Material: 16 Gauge Post Width: 5-1/2" Finish:...

The Simpson Strong-Tie LPC6Z design allows you the flexibility to connect a 6x or smaller width beam or joist to the top of a 6x post. Sold By Each Material: 16 Gauge Post Width: 5-1/2" Finish: ZMax® G-185 Galvanized Fasteners: (8) 10d (Beam) , (8) 10d (Post) LPC6Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating (galvanized...

The Simpson Strong-Tie BCS2-2/4 allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post...

The Simpson Strong-Tie BCS2-2/4 allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (Post Width) x 3-1/8" (Joists Width) Fastener Options: (14) 10d Common BCS2-2/4...

Simpson Strong-Tie LUC210Z ZMax® 2 x 10/12 Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC210Z also provides cleaner lines for exposed conditions...

Simpson Strong-Tie LUC210Z ZMax® 2 x 10/12 Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC210Z also provides cleaner lines for exposed conditions such as overhead decks. Material: 18 Gauge Finish: G-185 ZMax® Dimensions: 1-9/16" (Wide) x 7-3/4" (Height) x 1-3/4" (Seat Depth) Fastener Options: (10) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 1-1/2" 10d Nails (Joist) Strong Drive® SD9112 #9 x 1-1/2" Structural Screws may be substituted...

The Simpson Strong-Tie SSTB24HDG Hot Dipped Galvanized (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...

The Simpson Strong-Tie SSTB24HDG Hot Dipped Galvanized (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 25-5/8" Minimum Embedment: 20-5/8" Finish: Hot...

Simpson Strong-Tie P27SL5A Red Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350,...

Simpson Strong-Tie P27SL5A Red Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350, DX351, DX36, DX-A40, DX-A41 (except P27SL3), DX-450, DX-451, System 1H, P-368, A-40B, A-41B, Cobra, and most .27 caliber clone tools. P27SL Series SDS Sheet Please Note: Due to shipping restrictions on powder loads we can only ship theses loads by Ground Shipping to the 48 continental states....

Simpson Strong Drive® SSA10D 3" x .148" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as...

Simpson Strong Drive® SSA10D 3" x .148" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 67 nails in the 1 lb. pack. The nails are type 316 stainless steel providing high/severe corrosion protection. SSNA10D Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel chromium...

The Simpson Strong-Tie PAB5-24 5/8" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB5-24 5/8" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson...

Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 1" Pre-deflected...

The Simpson Strong-Tie TNT18314H Titen Turbo™ 3/16" x 3-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...

The Simpson Strong-Tie TNT18314H Titen Turbo™ 3/16" x 3-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...

The Simpson Strong-Tie THD50400H4SS Type 304 Stainless Steel 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THD50400H4SS Type 304 Stainless Steel 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

The Simpson Strong-Tie Deck Drive™ DSVT3S #10 x 3" Tan Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start...

The Simpson Strong-Tie Deck Drive™ DSVT3S #10 x 3" Tan Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSVT3S is ideally suited to be driven using a PRO300S Quik Drive® Auto Feed Screw Gun. This screw is easily countersunk into today’s wood deck boards giving it a nice finished look. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber so...

Simpson Strong-Tie Mission Outdoor Accents® APB88DSP decorative side plates attach to the bottom of a 8 x 8 post or column installed with the APB88 or APB88R post base. These plates provide a...

Simpson Strong-Tie Mission Outdoor Accents® APB88DSP decorative side plates attach to the bottom of a 8 x 8 post or column installed with the APB88 or APB88R post base. These plates provide a finished look to an installed post base. These decorative side plates provide a black powder coat finish over ZMax® galvanization for extra corrosion resistance. Install these side plates with Outdoor Accents® SDWS22312DBB structural wood screws and STN22 hex-head washers (sold separately) for...

Simpson Strong-Tie AT-XP30 30oz. Fast-Curing Anchoring Adhesive for Cracked and Uncracked Concrete dispenses easily in cold or warm environments with little to no odor. When mixed properly through...

Simpson Strong-Tie AT-XP30 30oz. Fast-Curing Anchoring Adhesive for Cracked and Uncracked Concrete dispenses easily in cold or warm environments with little to no odor. When mixed properly through the included nozzle AT-XP30 is a teal color for easy post-installation identification when required. AT-XP30 anchoring adhesive has demonstrated superior performance in reduced-temperature testing (14°F) and is made in the USA. AT-XP adhesive has passed the demanding adverse condition tests of...