Login/Register
Shopping Cart
OR
Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson...
Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...
Bright Checkered Nail Head The Simpson Strong-Tie S13A225SNC 2-1/4" x .092" Non-Painted Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in...
Bright Checkered Nail Head The Simpson Strong-Tie S13A225SNC 2-1/4" x .092" Non-Painted Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Bright Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces...
The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal...
The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The...
The Simpson Strong-Tie TNT18114H Titen Turbo™ 3/16" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT18114H Titen Turbo™ 3/16" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...
The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...
The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...
The Simpson Strong-Tie THDC25200H6SS Type 316 Stainless Steel 1/4" x 2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THDC25200H6SS Type 316 Stainless Steel 1/4" x 2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Quik Drive® PRO300SM35K Auto-Feed Screw Driving tool is the ideal tool for installing Quik Drive® Screws up to 3" in plywood subfloor, 2x Decking and more. The Sure-Grip guide tube...
The Quik Drive® PRO300SM35K Auto-Feed Screw Driving tool is the ideal tool for installing Quik Drive® Screws up to 3" in plywood subfloor, 2x Decking and more. The Sure-Grip guide tube increases the stability of the PRO300SM35K for a wide range of screws. The decking nose clip positions the screw on the deck board and centers it on the joist for an easy, uniform installation from a standing position. Kit Includes (1 Each): Makita 3500 RPM Screwdriver, PRO300S Attachment, Extension for...
The Simpson Strong-Drive® SDS25112 1/4" x 1-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112 screw...
The Simpson Strong-Drive® SDS25112 1/4" x 1-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112 screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 1-1/2" Thread Length: 1" Serrated Shank Diameter: 1/4" Point Type: Type 17 Point Drive...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD9112 #9 x 1-1/2"...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD9112 #9 x 1-1/2" structural connector screws are approved to replace nails in certain Simpson Strong-Tie Connectors. The advantages of using screws can be ease of installation in tight spots and less vibration when installing connectors during remodel projects. The shank of the SD9112 screws are designed to easily fit in...
The Simpson Strong-Tie® Strong-Drive® SDWS22300DB .220" x 3" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects...
The Simpson Strong-Tie® Strong-Drive® SDWS22300DB .220" x 3" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects where a high-strength attachment is needed. The 0.220" diameter of the SDWS22300DB 3" wood screw requires less torque to install than comparable fasteners, making it easier to drive. The Double-Barrier Coating corrosion-resistant coating makes it suitable for many interior and exterior applications....
The Simpson Strong-Tie® Strong-Drive® SDWH19300DB 3" screw is ideal for structural and general-purpose fastening applications where a hex-head drive is preferred. This 0.195" diameter...
The Simpson Strong-Tie® Strong-Drive® SDWH19300DB 3" screw is ideal for structural and general-purpose fastening applications where a hex-head drive is preferred. This 0.195" diameter fastener requires less torque to install than comparable fasteners, making it easier to drive; while the corrosion-resistant coating makes it suitable for many interior and exterior applications. The large hex washer head of the SDWH19300DB 3" screw creates an excellent bearing area for a secure...
The Simpson Strong-Tie ETBS-TH T-Handle for Wire Hole Cleaning Brushes will attach to any of the ETB-S series wire brushes to give you the ability to clean holes up to 13-1/2" deep. This handle can...
The Simpson Strong-Tie ETBS-TH T-Handle for Wire Hole Cleaning Brushes will attach to any of the ETB-S series wire brushes to give you the ability to clean holes up to 13-1/2" deep. This handle can be used with any Simpson ETB-S Series Wire Brush Head from 7/16" to 1-3/8". The Simpson wire brush system is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives to permit proper hole cleaning with fewer brush strokes at embedments up to 20 times the...
The Simpson Strong-Tie ET3G10 8.5 oz. Single Cartridge Epoxy Anchoring Adhesive is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into...
The Simpson Strong-Tie ET3G10 8.5 oz. Single Cartridge Epoxy Anchoring Adhesive is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). Includes: Nozzle & Extension Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry Ideal for general doweling and threaded rod applications Two-year shelf life for unopened...
Simpson Strong-Tie Outdoor Accents® APA21 angles tie together beams, rafters and more. The APA21 angle makes structural connections between beams and posts much more visually appealing. These...
Simpson Strong-Tie Outdoor Accents® APA21 angles tie together beams, rafters and more. The APA21 angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Install with Outdoor Accents® structural screws and hex-head washer (sold separately) for a decorative look. Stronger than angled nailing or screw fastening alone for outdoor living or home...
The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...
The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 6". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...
The Simpson Strong-Tie EDT22S Manual Dispensing Tool is all metal, making it durable to handle 22 oz epoxy application every day without fail. This heavy duty tool is engineered for high-volume,...
The Simpson Strong-Tie EDT22S Manual Dispensing Tool is all metal, making it durable to handle 22 oz epoxy application every day without fail. This heavy duty tool is engineered for high-volume, continuous use. The EDT22S can be easily converted from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridges when required. Please Note: The EDT22S Tool can also be modified to dispense Simpson AT-XP13 12.5oz. ACRYLIC-TIE Adhesive. Heavy duty construction prevents bent push rods...
Simpson Strong Tie AnchorMate® 5/8" Anchor Bolt Holders are designed to hold 5/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is...
Simpson Strong Tie AnchorMate® 5/8" Anchor Bolt Holders are designed to hold 5/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is no need for a hex nut during the pour. Additionally and Anchormate® protects the threads from splashed concrete. Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and easy to use....
Simpson Strong-Tie Mission Outdoor Accents® flat APL4 "L" straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APL4 "L"...
Simpson Strong-Tie Mission Outdoor Accents® flat APL4 "L" straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APL4 "L" provide reinforcement for a connection where two 4x or larger lumber pieces intersect at a 90-degree angle. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Install with Outdoor Accents® structural screws and hex-head washer (sold separately) for a...
The Simpson Strong-Tie APDJT2-4 Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and...
The Simpson Strong-Tie APDJT2-4 Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood screws and hex-head washers (sold separately) for a decorative look Material: 12 Gauge Steel Coating: ZMax® galvanized with a...
Simpson Strong-Tie Mission Outdoor Accents® APB44 post bases secure a 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported...
Simpson Strong-Tie Mission Outdoor Accents® APB44 post bases secure a 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization over a black powder coat for extra corrosion resistance. APB44 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet stringent building codes for...
The Simpson Strong-Tie SD10112DBB #10 x 1-1/2" Outdoor Accents® connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor...
The Simpson Strong-Tie SD10112DBB #10 x 1-1/2" Outdoor Accents® connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor Accents APA21 90-degree angle, the screw's black finish accents any outdoor living project. The sharp point of the screw enables fast starts, and the patented serrated threads reduce torque for improved drivability. Use with Outdoor Accents® connectors (sold separately) for a decorative look. 1/4"...
Simpson Strong-Tie Outdoor Accents® APLH24 concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking...
Simpson Strong-Tie Outdoor Accents® APLH24 concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APLH24 hanger installs easily with the Outdoor Accents® connector screw. Install with Outdoor Accents® SD10112DBB structural screws for a decorative look and meet required load values. Designed for use with 2x4 joists. Material: 14 Gauge Steel Coating:...
Simpson Strong-Tie Outdoor Accents® APHH46 concealed flange heavy hangers connect 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a...
Simpson Strong-Tie Outdoor Accents® APHH46 concealed flange heavy hangers connect 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APHH46 heavy hanger installs easily with the Outdoor Accents® SDWS22312DBB connector screws and STN22 hex-head washers. Use Strong-Drive SDS25300 Heavy-Duty Connector screws to connect to the header Install with Outdoor Accents®...
The Simpson Strong-Tie Outdoor Accents® APRTR Decorative Rigid Tie connects a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure...
The Simpson Strong-Tie Outdoor Accents® APRTR Decorative Rigid Tie connects a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX® galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents Accessories line, this decorative hardware connector can be used with either the Mission Collection® or Avant Collection™,...