Simpson Strong-Tie

Simpson Strong-Tie Mission Outdoor Accents® APB44 post bases secure a 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported...

Simpson Strong-Tie Mission Outdoor Accents® APB44 post bases secure a 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization over a black powder coat for extra corrosion resistance. APB44 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet stringent building codes for...

Simpson Strong-Tie TSP Stud Plate for connecting the top plate to either the wall stud or 2x rafter. The TSP Tie uses (9) 10d .131" x 1-1/2" to the stud or rafter and (6) 10d x 1-1/2" or 3" to the...

Simpson Strong-Tie TSP Stud Plate for connecting the top plate to either the wall stud or 2x rafter. The TSP Tie uses (9) 10d .131" x 1-1/2" to the stud or rafter and (6) 10d x 1-1/2" or 3" to the top plate depending on the load value required. Material: 16 Gauge Finish: Standard G90 Zinc Fastener Options: (9) 10d x 1-1/2" Nails (Stud or Rafter) (6) 10d x 1-1/2" or 3" (Top Plate) TSP Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...

The Simpson Strong-Tie LSSJ26LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes...

The Simpson Strong-Tie LSSJ26LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie APDJT2-4 Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and...

The Simpson Strong-Tie APDJT2-4 Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood screws and hex-head washers (sold separately) for a decorative look Material: 12 Gauge Steel Coating: ZMax® galvanized with a...

The new patent-pending Simpson Strong-Tie® MPB44Z is the first post base specifically designed to provide moment resistance for 4 X 4 columns or posts. An innovative overlapping sleeve design...

The new patent-pending Simpson Strong-Tie® MPB44Z is the first post base specifically designed to provide moment resistance for 4 X 4 columns or posts. An innovative overlapping sleeve design encapsulates the post, helping to resist rotation around its base. The MPB44Z is ideal for outdoor structures, such as carports, fences and decks. Built-in standoff tabs provide the required 1" standoff to resist decay of the post while eliminating multiple parts and assembly. Additionally, the MPB44Z...

The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal...

The THDB25178H 1/4" x 1-7/8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The...

Simpson Strong-Tie Outdoor Accents® APLH24 concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking...

Simpson Strong-Tie Outdoor Accents® APLH24 concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APLH24 hanger installs easily with the Outdoor Accents® connector screw. Install with Outdoor Accents® SD10112DBB structural screws for a decorative look and meet required load values. Designed for use with 2x4 joists. Material: 14 Gauge Steel Coating:...

Simpson Strong-Tie Outdoor Accents® APHH46 concealed flange heavy hangers connect 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a...

Simpson Strong-Tie Outdoor Accents® APHH46 concealed flange heavy hangers connect 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APHH46 heavy hanger installs easily with the Outdoor Accents® SDWS22312DBB connector screws and STN22 hex-head washers. Use Strong-Drive SDS25300 Heavy-Duty Connector screws to connect to the header Install with Outdoor Accents®...

The Simpson Strong-Drive® SDWS16212Q 2-1/2" x .160" Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in multiple types of framing applications. The SDWS Framing screw...

The Simpson Strong-Drive® SDWS16212Q 2-1/2" x .160" Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in multiple types of framing applications. The SDWS Framing screw is 0.160" in diameter and superior to nails in holding power and pull-out resistance. It is code listed under IAPMO UES ER-192 and meets 2012 and 2015 IRC® and IBC® code requirements for several common wood framing and engineered-wood applications. The screw has a SawTooth™ point that makes...

The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...

The Simpson Strong-Tie THDB25178CS 1/4" x 1-7/8" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...

The Simpson Strong-Tie VPA2 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-1/2" wide rafters to the top plate. It will adjust to accommodate...

The Simpson Strong-Tie VPA2 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-1/2" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 1-9/16" Actual Joist Width: 1-1/2"...

The Simpson Strong-Tie ML23Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...

The Simpson Strong-Tie ML23Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (4) SDS25112 Screws Dimensions: 3" Length x 2" (Flange Widths) ML23Z Information and...

Simpson Strong-Tie HRS6 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value....

Simpson Strong-Tie HRS6 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/8" (Wide) x 6" (Length) Fastener Options: (6) .148" x 2-1/2" Nails or (6) SD9112 Structural Screws HRS6 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...

Simpson Strong-Tie EPB44A allows you to install an elevated 4 x 4 post base 2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any...

Simpson Strong-Tie EPB44A allows you to install an elevated 4 x 4 post base 2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and un-braced carports. Finish: Standard G90 Galvanized Material: 14 Gauge Base Size: 3-9/16" x 3" x 2-3/8"...

The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...

The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 6". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...

The Simpson Strong-Tie EDT22S Manual Dispensing Tool is all metal, making it durable to handle 22 oz epoxy application every day without fail. This heavy duty tool is engineered for high-volume,...

The Simpson Strong-Tie EDT22S Manual Dispensing Tool is all metal, making it durable to handle 22 oz epoxy application every day without fail. This heavy duty tool is engineered for high-volume, continuous use. The EDT22S can be easily converted from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridges when required. Please Note: The EDT22S Tool can also be modified to dispense Simpson AT-XP13 12.5oz. ACRYLIC-TIE Adhesive. Heavy duty construction prevents bent push rods...

The Simpson Strong-Tie SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...

The Simpson Strong-Tie SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 17-5/8" Minimum Embedment: 12-5/8" Finish: None Rolled threads for higher...

The Simpson Strong-Tie PT-27 Powder Actuated Tool is a semi-automatic and fast-cycling fastening tool that is engineered for continuous use, high reliability and low maintenance. This versatile tool...

The Simpson Strong-Tie PT-27 Powder Actuated Tool is a semi-automatic and fast-cycling fastening tool that is engineered for continuous use, high reliability and low maintenance. This versatile tool fires a variety of fastener types and lengths. Key Fastening Applications• includes acoustical ceilings•, electrical applications•, sill plates•, drywall track•, waterproofing material, lathing and more. Reliable design of the world's most popular tool Semi-automatic and fast cycling Engineered for...

Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7...

Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...

The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x 3-1/2") Strap: 10 Ga. x 2-1/4" Wide x 8-3/8" High CBSQ44 Information and Installation...

The Simpson Strong-Drive® SDS25112 1/4" x 1-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112 screw...

The Simpson Strong-Drive® SDS25112 1/4" x 1-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25112 screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 1-1/2" Thread Length: 1" Serrated Shank Diameter: 1/4" Point Type: Type 17 Point Drive...

Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson...

Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...

The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed...

The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Common Nails PB44 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....

The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x...

The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. Holds the rafter or truss on both sides for high lateral load resistance Can be installed on inside or outside of wall, or...