Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie CB44PC Powder Coat column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. This...
Simpson Strong-Tie CB44PC Powder Coat column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. This column base features a black powder-coat finish for a more decorative look. Strap Material: 7 Ga. x 2" Wide Black Powder Coat Steel Base Material: 7 Ga Black Powder Coat (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44PC Information and Installation Instructions Simpson Strong-Tie Powder...
Simpson Strong-Tie EPB44-12 allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus...
Simpson Strong-Tie EPB44-12 allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and un-braced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base...
The Simpson PB44HDG Hot Dipped Galvanized Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Hot...
The Simpson PB44HDG Hot Dipped Galvanized Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Hot Dipped Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails PB44HDG information and installation instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with...
Simpson Strong-Tie PBS46 Standoff Post Bases are used to connect a 4 x 6 (3-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over...
Simpson Strong-Tie PBS46 Standoff Post Bases are used to connect a 4 x 6 (3-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Available only in standard galvanizing. Finish: Standard G90 Galvanized Base Material: 12 Gauge Base Dimensions: 3-9/16" x 5-7/16" Strap Material: 14 Gauge Strap Height: 6-9/16" Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS46 information and installation instructions...
The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...
The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3" Wide x 8-11/16" High CBSQ46 Information and Installation...
Simpson Strong-Tie EPB44PHDG Hot Dipped Galvanized allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above concrete in both cast in place and retrofit applications. This clearance...
Simpson Strong-Tie EPB44PHDG Hot Dipped Galvanized allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above concrete in both cast in place and retrofit applications. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot...
The new patent-pending Simpson Strong-Tie® MPB88Z is the first post base specifically designed to provide moment resistance for 8 x 8 columns or posts. An innovative overlapping sleeve design...
The new patent-pending Simpson Strong-Tie® MPB88Z is the first post base specifically designed to provide moment resistance for 8 x 8 columns or posts. An innovative overlapping sleeve design encapsulates the post, helping to resist rotation around its base. The MPB88Z is ideal for outdoor structures, such as carports, fences and decks. Built-in standoff tabs provide the required 1" standoff to resist decay of the post while eliminating multiple parts and assembly. Additionally, the MPB88Z...
The Simpson PB44R Post Base for rough 4 x 4 (4" x 4") lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater...
The Simpson PB44R Post Base for rough 4 x 4 (4" x 4") lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Common Nails PB44R information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating...
Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7...
Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...
Save by Purchasing a Quantity of 7 Boxes (63 Pieces)! The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using...
Save by Purchasing a Quantity of 7 Boxes (63 Pieces)! The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3" Wide x...
Simpson Strong-Tie PBS66 Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over...
Simpson Strong-Tie PBS66 Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Finish: Standard G90 Galvanized Base Material: 12 Gauge Base Dimensions: 5-1/2" x 5-3/8" Strap Material: 14 Gauge Strap Height: 6-1/2" Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS66 information and installation instructions Standard G90 Zinc Galvanized Coating Information...
Save by Purchasing a Quantity of 10 Boxes (90 Pieces)! Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed...
Save by Purchasing a Quantity of 10 Boxes (90 Pieces)! Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
The Simpson CBSQ46-SDS2HDG (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...
The Simpson CBSQ46-SDS2HDG (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3"...
Simpson Strong-Tie EPB46 allows you to install an elevated 4 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 6 post to stay above most standing water thus delaying...
Simpson Strong-Tie EPB46 allows you to install an elevated 4 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...
The Simpson PB46 Post Base for 4 x 6 (3-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed...
The Simpson PB46 Post Base for 4 x 6 (3-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails PB46 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This...
Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the...
Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...