Circular Carbide Saw Blades

Ideal for General Construction Applications, including fast, efficient ripping and crosscutting The Freud Diablo D0624A Framing Blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and frames more...

Ideal for General Construction Applications, Including Fast, Efficient Ripping and Crosscutting Diablo’s next generation D0724A 7-1/4” 24T Framing Blade with new Tracking Point™ Tooth design delivers maximum life and durability with effortless cutting performance. Up Your Cutting Game with this one-of-a-kind Tracking Point™ tooth grind for unmatched cutting performance and efficiency. The Diablo D0724A blade is ideal for framers, roofers, remodelers, concrete formers or anyone else...

Ideal for Extreme Framing and Demolition Applications! New Diablo® D0724D Demo Demon Amped™ Ultimate Framing and Demolition saw blade will provide up to 10 times cutting performance in intense applications. This 7-1/4” 24-Tooth blade includes the new Tracking Point Amped™ tooth grind sequence that is specifically designed to provide extreme longevity as well as smooth and effortless cut. Even when cutting abrasive materials such as shingles, bolts or nail-embedded wood you will...

Diablo’s D0740X 7-1/4” x 40T Finish and Plywood Blade provides a smooth cut in both plywood and other woods. This blade can be used for both cross cutting and ripping. This is a great blade for job sites when you have various types of cutting to do but do not want to use multiple saws. The D0740X Diablo fits most 7-1/4" saws including the various models of Skil 77's that have been on the market for years. TiCo™ Hi-Density carbide specifically designed for each application to increase...

Ideal for cutting steel studs, steel sheet, steel pipe and other mild steel sections. The New Diablo D0748F 7-1/4" x 48T Steel Demon Metal Blade efficiently cuts through ferrous metals quickly and accurately leaving clean, burr free cuts. These blades feature teeth with Triple Chip Grind (TCG) and a special carbide blend with outstanding resistance to the high impact generated by steel cutting. Freud's D0748F Steel Demon blade slashes through ferrous containing metals quickly and accurately...

Ideal for Cutting 18 Gauge or Less Metals. The Diablo D0770F 7-1/4" x 70T Steel Demon Thin Ferrous Metal Blade efficiently cuts through thin ferrous metals quickly and accurately leaving clean, burr free cuts. These blades feature teeth with Triple Chip Grind (TCG) and a special carbide blend with outstanding resistance to the high impact generated by steel cutting. This is an excellent blade for cutting 18 gauge or less metals like roofing, siding, sheet metals, decking, corrugated steel and...

Ideal for all Fiber Cement Products! The Diablo HardieBlade D0704DH is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products. The D0704DH Diablo Fiber Cement Blade generates up to 50% less respirable dust*, while delivering the longest life in all fiber cement materials. Diablo PCD Hardieblades feature a unique, spark-eroded Triple Chip grind for long life giving you up to 60 times the life in fiber cement of conventional...

The Irwin 24030 7-1/4" x 24T carbide framing blade is still the most popular blade used by many framing crews. It not only cuts fast and clean but is so competitively priced you get more value than many other brands on the market. New and improved design Every other tooth is thinner for faster cuts New heat vent/expansion slot design reduces vibration for longer life and straighter cuts Construction grade carbide teeth for longer life Reinforced shoulder for added durability Fully hardened...

The Irwin 24030 7-1/4" x 24T carbide framing blade is still the most popular blade used by many framing crews. It not only cuts fast and clean but is so competitively priced you get more value than many other brands on the market. Now you can save more by purchasing by the box of 10 pieces. New and improved design Every other tooth is thinner for faster cuts New heat vent/expansion slot design reduces vibration for longer life and straighter cuts Construction grade carbide teeth for longer...

Ideal for general construction applications, including fast, efficient ripping and crosscutting The Diablo D0824X 8 - 8-1/4" x 24T Carbide Framing Saw Blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer...

Ideal for General Construction Applications, Including Fast, Efficient Ripping and Crosscutting! The Diablo D1024X 10" x 24T Carbide Ripping Blade is an ideal blade when you have to rip lumber. This blade is an ideal blade for remodelers who has to create wood pieces to fit in unique spaces. It works well with plywood, OSB and standard lumber. If you need to crosscut the D1024X blade will get the job done as well. Since it is a Diablo® blade you can rest assured you will get smooth and...

Ideal for Cutting Oak, Pine, Plywood, Pressure Treated Lumber and Beams! The Diablo D1040W 10-1/4" x 40T BIGFOOT Diablo Carbide Blade is an designed for use on the BIG FOOT™ Beam Saw. This blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. The Diablo D1040W Carbide Blade is also great for both sliding and...

The Big Foot Saw BL-102536T 10 1/4" Thin Kerf 36 Tooth Carbide Blade was designed for The Big Ten Inch Saw. The thin kerf reduces stress on the saw and give you more control of the cut. More control means a more accurate cut. This blade features a diamond knockout center, which makes it a terrific tool for framers and the only blade for your Big Foot Ten Inch Saw. Thin Kerf Design Cuts Fast and Easy Decreased Motor Load Designed for the Big Foot Saw Diameter: 10-1/4" Kerf: 0.078" 90° Cut:...

Ideal for Cutting Oak, Pine, Plywood, Pressure Treated Lumber and Beams! The Diablo D1040X 10" x 40T Carbide General Purpose Blade is an excellent choice for table & miter saws. This blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. The Diablo D1040X 10" x 40T Carbide General Purpose Blade is great for both sliding...

Ideal for Ripping and Crosscutting Wood & Wood Composites with the goal of a smooth finish. The Diablo D1050X 10" x 50T Combination Blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. This large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting. Diablo Series Features New super thin...

Ideal for Trim Carpenters...Leaves a Smooth Surface! The Diablo D1060X 10" x 60T Carbide Fine Finish Blade lets trim crews get the most out of sliding or chop style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing grabbing or blowout. Finer finish means less sanding! Diablo Series Features New super thin kerf provides ease of feed, accuracy and maximized performance PermaSield® Coating is...

Flawless Finish in Wood, Melamine & Veneered Plywood with Minimal Rework! The Diablo D1080X 10" x 80T Carbide Ultra Finish Blade lets trim crews get the most out of sliding or chop style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing grabbing or blowout. Diablo Series Features New super thin kerf provides ease of feed, accuracy and maximized performance PermaSield® Coating is a...

Ultimate Flawless Finish!...Flawless crosscuts in wood with minimal rework. The Diablo D1090X Carbide Ultimate Flawless Finish blade features Axial Shear Face Grind (ASFG) tooth geometry that will let trim your crews get precise splinter free cuts on fine molding requiring no rework. The new ultra thin kerf allows portable job site saws to perform to the level of workshop stationary saws. This new innovation allows these blades to deliver energy efficiency & effortless cutting that users can...

Ideal for Cutting Oak, Pine, Plywood, Pressure Treated Lumber and Beams! The Diablo D1244X 12" x 44T Carbide General Purpose Blade is an excellent choice for table & miter saws, this blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and chop style miter saws as well as table saws. Diablo...

Ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The Diablo D1260X 12" x 60T Combination Blade is the best choice for miter and slide miter saws when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. This large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting. Diablo Series Features...

Ideal for Trim Carpenters...Leaves a Smooth Surface! The Diablo D1280X 12" x 80T Carbide Fine Finish Blade lets trim crews get the most out of sliding or chop style miter saws, as well as job site or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing grabbing or blowout. Diablo Series Features New super thin kerf provides ease of feed, accuracy and maximized performance PermaSield® Coating is a non-stick, aluminum alloy...

Ultimate Flawless Finish!...Flawless crosscuts in wood with minimal rework The Diablo D12100X Carbide Ultimate Flawless Finish blade features Axial Shear Face Grind (ASFG) tooth geometry that will let your trim crews get precise splinter free cuts on fine molding requiring no rework. The new ultra thin kerf allows portable job site saws to perform to the level of workshop stationary saws. This new innovation allows these blades to deliver energy efficiency & effortless cutting that users can...

Ideal for Cutting Oak, Pine, Plywood, Pressure Treated Lumber, Wood Composites, and Beams! The Diablo D1632X 16-5/16" x 32T Carbide Beam Blade is an excellent blade for the Makita 5402NA Beam Saw. It is also an excellent choice for table and miter saws. The blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. The...