Refine Search By Filter(s)

Simpson Strong Tie CMST Coil Strapping
Price: $161.77
Availability: Stock
Simpson Strong-Tie Item #: CMST12 -

    Simpson Strong-Tie CMST12 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMST12 are approved for use with SD Screws as a nail substitution. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3" (Wide) x 40' (Length) Fasteners: 10d or 16d depending on end length and material (See information link below) CMST12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...

    Simpson Strong Tie HRS Heavy Duty Strap Tie
    Price: $1.58
    Availability: Ships Direct
    Simpson Strong-Tie Item #: HRS6 -

      Simpson Strong-Tie HRS6 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/8" (Wide) x 6" (Length) Fastener Options: (6) .148" x 2-1/2" Nails or (6) SD9112 Structural Screws HRS6 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...

      Simpson Strong Tie LSTA/MSTA Straps
      Price: $0.48
      Availability: Ships Direct
      Simpson Strong-Tie Item #: LSTA9 -

        Simpson Strong-Tie LSTA9 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 9" (Length) Fasteners: (8) 10d Nails (8) SD9 x 1-1/2" Screws LSTA9...

        Simpson Strong-Tie LTS Twist Straps
        Price: $0.77
        Availability: Ships Direct
        Simpson Strong-Tie Item #: LTS12 -

          The 1-1/4" wide x 12" long LTS12 Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: 10d or 10d x 1-1/2" depending on load value required and depth of receiving member (See...

          Simpson Strong Tie LSTA/MSTA Straps
          Price: $0.65
          Availability: Ships Direct
          Simpson Strong-Tie Item #: MSTA9 -

            Simpson Strong-Tie MSTA9 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 9" (Length) Fasteners: (8) 10d Nails (8) SD9 x 1-1/2" Screws MSTA9...

            Simpson Strong Tie ST 16-Gauge Series Straps Ties
            Price: $0.87
            Availability: Ships Direct
            Simpson Strong-Tie Item #: ST9 -

              Simpson Strong-Tie ST9 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 9" (Length) Fastener Options: (8) 16d Nails (8) SD10 x 1-1/2" Screws ST9 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz....

              Simpson Strong-Tie CMST Strap
              Price: $161.77
              Availability: Stock
              Simpson Strong-Tie Item #: CMST14 -

                Simpson Strong-Tie CMST14 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMST14 are approved for use with SD Screws as a nail substitution. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3" (Wide) x 52-1/2' (Length) Fasteners: 10d or 16d depending on end length and material (See information link below) CMST14 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...

                Simpson Strong Tie HRS Heavy Duty Strap Tie
                Price: $1.85
                Availability: Ships Direct
                Simpson Strong-Tie Item #: HRS8 -

                  Simpson Strong-Tie HRS8 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/8" (Wide) x 8" (Length) Fastener Options: (10) .148" x 2-1/2" Nails or (10) SD9112 Structural Screws HRS8 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

                  Simpson Strong Tie LSTA/MSTA Straps
                  Price: $0.53
                  Availability: Ships Direct
                  Simpson Strong-Tie Item #: LSTA12 -

                    Simpson Strong-Tie LSTA12 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x 1-1/2" Screws...

                    Simpson Strong Tie LSTA/MSTA Straps
                    Price: $0.67
                    Availability: Ships Direct
                    Simpson Strong-Tie Item #: MSTA12 -

                      Simpson Strong-Tie MSTA12 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x 1-1/2" Screws...

                      Simpson Strong Tie ST 16-Gauge Series Straps Ties Illustration
                      Price: $0.91
                      Availability: Stock
                      Simpson Strong-Tie Item #: ST12 -

                        Simpson Strong-Tie ST12 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 11-5/8" (Length) Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" Screws ST12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...

                        Simpson Strong Tie CMST Coil Strapping
                        Price: $165.59
                        Availability: Stock
                        Simpson Strong-Tie Item #: CMSTC16 -

                          Simpson Strong-Tie CMSTC16 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMSTC16 are approved for use with SD Screws as a nail substitution. For easier installation the CMSTC contains nail slots. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3" (Wide) x 54' (Length) Fasteners: 16d x 3-1/2" CMSTC16 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...

                          Simpson Strong Tie HRS Heavy Duty Strap Tie
                          Price: $2.41
                          Availability: Ships Direct
                          Simpson Strong-Tie Item #: HRS12 -

                            Simpson Strong-Tie HRS12 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/8" (Wide) x 12" (Length) Fastener Options: (14) .148" x 2-1/2" Nails or (14) SD9112 Structural Screws HRS12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

                            Simpson Strong Tie LSTA/MSTA Straps
                            Price: $0.69
                            Availability: Ships Direct
                            Simpson Strong-Tie Item #: LSTA15 -

                              Simpson Strong-Tie LSTA15 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 15" (Length) Fasteners: (12) 10d Nails (12) SD9 x 1-1/2" Screws...

                              Simpson Strong-Tie LTS Twist Straps
                              Price: $7.26
                              Availability: Ships Direct
                              Simpson Strong-Tie Item #: LTS12SS -

                                The 1-1/4" wide x 12" long LTS12SS Stainless Steel Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. LTS12SS straps should be used where severe corrosive conditions exist. Material: 18 gauge Finish: Stainless Steel Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: 10d or...

                                Simpson Strong Tie LSTA/MSTA Straps
                                Price: $0.90
                                Availability: Ships Direct
                                Simpson Strong-Tie Item #: MSTA12Z -

                                  Simpson Strong-Tie MSTA12Z ZMaz® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: ZMax® G185 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x...

                                  Simpson Strong Tie ST 16-Gauge Series Straps Ties
                                  Price: $1.09
                                  Availability: Stock
                                  Simpson Strong-Tie Item #: ST18 -

                                    Simpson Strong-Tie ST18 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 17-3/4" (Length) Fastener Options: (14) 16d Nails (14) SD10 x 1-1/2" Screws ST18 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...

                                    Simpson Strong Tie HRS416Z Heavy Duty Strap Tie
                                    Price: $6.58
                                    Availability: Ships Direct
                                    Simpson Strong-Tie Item #: HRS416Z -

                                      Simpson Strong-Tie HRS416Z 12-Gauge 3-1/4" Wide Heavy Strap Ties are designed to splice 2 x 4 or larger lumber using the face. This splice strap uses SDS25112 structural screws to reach desired load. Material: 12 gauge Finish: ZMax® G185 Galvanized Dimensions: 3-1/4" (Wide) x 16" (Length) Fastener Options: (16) 1/4" x 1-1/2" SDS Screws HRS416Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653...

                                      Simpson Strong Tie LSTA/MSTA Straps
                                      Price: $0.76
                                      Availability: Ships Direct
                                      Simpson Strong-Tie Item #: LSTA18 -

                                        Simpson Strong-Tie LSTA18 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 18" (Length) Fasteners: (14) 10d Nails (14) SD9 x 1-1/2" Screws...

                                        Simpson Strong-Tie LTS Twist Straps
                                        Price: $1.07
                                        Availability: Ships Direct
                                        Simpson Strong-Tie Item #: LTS16 -

                                          The 1-1/4" wide x 16" long LTS16 Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 16" (Length) Fasteners: 10d or 10d x 1-1/2" depending on load value required and depth of receiving member (See...

                                          Simpson Strong Tie ST 16-Gauge Series Straps Ties
                                          Price: $1.61
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: ST22 -

                                            Simpson Strong-Tie ST22 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 21-5/8" (Length) Fastener Options: (18) 16d Nails (18) SD10 x 1-1/2" Screws ST22 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...

                                            Simpson Strong Tie CSHP Coil Strapping
                                            Price: $67.65
                                            Availability: Ships Direct
                                            Simpson Strong-Tie Item #: CSHP18 -

                                              Simpson CSHP18 1-3/8" x 75' High Performance Coiled Steel Straps are continuous utility straps which can be cut to length at the jobsite. The new patent-pending CSHP high-performance coiled strap features a raised embossment that makes it easy to install with a power framing nailer. This new tested feature provides improved performance that results in using fewer nails, shorter straps and overall lower installed cost. CSHP18 steel strapping is used in a variety of structural applications that...

                                              Simpson Strong Tie HTP37Z Strap Tie
                                              Price: $1.59
                                              Availability: Ships Direct
                                              Simpson Strong-Tie Item #: HTP37Z -

                                                Simpson Strong-Tie HTP37Z 16-Gauge 3" Wide Strap Ties are designed to splice 2 x 4 or larger lumber using the face. This splice strap uses N10 .148 x 1-1/2" nails or SD9112 strustural screws to reach desired load. Material: 16 gauge Finish: ZMax® G185 Galvanized Dimensions: 3" (Wide) x 7" (Length) Fastener Options: (20) .148 x 1-1/2" Nails or (20) SD9112 Structural Screws HTP37Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a...

                                                Simpson Strong Tie LSTA/MSTA Straps
                                                Price: $0.91
                                                Availability: Ships Direct
                                                Simpson Strong-Tie Item #: LSTA21 -

                                                  Simpson Strong-Tie LSTA21 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 21" (Length) Fasteners: (16) 10d Nails (16) SD9 x 1-1/2" Screws...

                                                  Simpson Strong-Tie Coil, Flat and Twist Strap Ties