Hy-Tek Screw Shank Gun Nails
Price: $58.75
Availability: Stock
Hy-Tek Fasteners Item #: 120M22 -

    Hy-Tek 120M22 2-1/4" x .120" Screw Shank Nails are Equivalent to Common Nail LoadsHy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. For more information regarding the 120M22 Hy-Tek 2-1/4" x...

    Metabo-HPT 8d Collated Duplex Nails (Box of 2000)
    Price: $50.63
    Availability: Stock
    Metabo-HPT Power Tools Item #: 50234-8D -

      These genuine Metabo-HPT 2-3/4" x .131 (8D) Duplex nails are manufactured at higher standards for material and workmanship to help eliminate downtime caused by using fasteners not designed for the NR3675DD Duplex nailer. This means you can complete your concrete forming or scaffolding project done more efficiently and economically. Nail Type: 21° Full Round Duplex Head Plastic Strip Smooth Shank Duplex Nails Nail Size: 2-3/4". x.131" Shank with 2-1/4" drive length Application: Duplex nails...

      Metal Connector Pneumatic Strip Nails
      Price: $39.79
      Availability: Stock
      Misc Brands Item #: FHNPJH112N8 -

        This 1-1/2" x .131 Heat Treated Metal Connector Nail is designed to be used in 31 Degree Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please Note: Consult your...

        Senco A100509 1/2 inch Micro Headless Pin
        Price: $10.60
        Availability: Stock
        Senco Item #: A100509 -

          The Senco A100509 1/2" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

          Senco AY10EAA Brad Nails
          Price: $28.10
          Availability: Stock
          Senco Item #: AY10EAA -

            Genuine Senco AY10EAA 5/8" Slight Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

            Senco P08BABT Wide Crown Staples
            Price: $70.12
            Availability: Stock
            Senco Item #: P08BABT -

              Senco P08BABT, 1/2" Long, 1" Crown, Electro Galvanized P-Series Staples are primarily used for the application of building papers, lathing or any other project that requires a wide crown staple. Senco P-Series Staples Fit the Following Tools: Senco: PW200, PW150, PW150R, PW, PW-2", PW-R, SPS, MW, WC150RXP, WC200XP Hitachi N3424A, N5024A Duo-Fast RS-1748, KW-1748 OTHERS: Fasco: F3 SNW-38CT R, F30 SNW-50 R    Halstead HSW14 Do Not Use This Fastener for ACQ Pressure Treated...

              Ring Shank Not Painted Stainless Steel Wire Coil Siding and Fencing Nails
              Price: $128.84
              Availability: Stock
              Simpson Strong-Tie Item #: COIL7 -

                Bright Checkered Nail Head The 2-1/4" x .092" Non-Painted Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Bright Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight and accepts...

                Hy-Tek Screw Shank Gun Nails
                Price: $93.26
                Availability: Stock
                Hy-Tek Fasteners Item #: 120M22H -

                  Hy-Tek 120M22H Hot Dipped Galvanized 2-1/4" x .120" Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. This Hot Dipped Galvanized nail...

                  Metabo-HPT 16d Collated Duplex Nails (Box of 2000)
                  Price: $62.97
                  Availability: Stock
                  Metabo-HPT Power Tools Item #: 50312-16D -

                    These genuine Metabo-HPT 3-1/2" x .131 (16D) Duplex nails are manufactured at higher standards for material and workmanship to help eliminate downtime caused by using fasteners not designed for the NR3675DD Duplex nailer. This means you can complete your concrete forming or scaffolding project done more efficiently and economically. Nail Type: 21° Full Round Duplex Head Plastic Strip Smooth Shank Duplex Nails Nail Size: 3-1/2" x .131" Shank with 3" drive length Application: Duplex nails...

                    Metal Connector Pneumatic Strip Nails
                    Price: $58.51
                    Availability: Stock
                    Misc Brands Item #: FHNPJH112 -

                      This 1-1/2" x .148 Heat Treated Metal Connector Nail is designed to be used in 31 Degree Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please Note: Consult your...

                      Senco A100629 5/8 inch Micro Headless Pin
                      Price: $10.98
                      Availability: Stock
                      Senco Item #: A100629 -

                        The Senco A100629 5/8" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

                        senco ay11eaa brad nails
                        Price: $29.28
                        Availability: Stock
                        Senco Item #: AY11EAA -

                          Genuine Senco AY11EAA 3/4" Slight Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

                          Senco m001002 1-1/4" 16ga. straight finish nails
                          Price: $10.97
                          Availability: Stock
                          Senco Item #: M001002 -

                            The M001002 Senco 1-1/4" long x 16 Gauge Straight Finish Nails are made from electro galvanized wire with Sencote coating for easier driving and more holding power. Best for furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels Senco 16 Gauge Finish Nails fit the following tools: Senco: AirFree32, FinishPro32 Accuset: A250SM Craftsman: 18431 Dewalt: D51256K Hitachi: NT65A, NT65MA2 Paslode: 3250-F16, IM250F Porter Cable: FN250A ...

                            Ring Shank Dark Brown Stainless Steel Wire Coil Siding and Fencing Nails
                            Price: $207.66
                            Availability: Stock
                            Simpson Strong-Tie Item #: COIL7BRN -

                              Head is Painted Dark Brown! The Simpson Strong-Tie 2-1/4" x .092" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Dark Brown Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

                              Hy-Tek Screw Shank Gun Nails
                              Price: $58.75
                              Availability: Stock
                              Hy-Tek Fasteners Item #: 12030M -

                                Hy-Tek 12030M 3" x .120" Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. For more information regarding the 12030M Hy-Tek 3" x .120"...

                                Metal Connector Pneumatic Strip Nails
                                Price: $52.01
                                Availability: Stock
                                Misc Brands Item #: FHNPJH112HD -

                                  This 1-1/2" x .148 Hot Dipped Galvanized Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please...

                                  Senco A100759 3/4 inch Micro Headless Pin
                                  Price: $11.45
                                  Availability: Stock
                                  Senco Item #: A100759 -

                                    The Senco A100759 3/4" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

                                    senco ay13eaa brad nails
                                    Price: $32.25
                                    Availability: Stock
                                    Senco Item #: AY13EAA -

                                      Genuine Senco AY13EAA 1" Slight Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

                                      Senco DA15EABN Electro Galvanized Finish Nails
                                      Price: $51.27
                                      Availability: Stock
                                      Senco Item #: DA15EABN -

                                        The Senco DA15EABN 1-1/4" Electro Galvanized (EG) 15 Gauge Angled Finish Nail has set the standard for finish carpenters with their outstanding quality and holding power! They are manufactured to Senco's strict specifications thus eliminating or reducing down time due to jamming and other tool malfunctions. Do Not Use The Senco DA15EABN for ACQ Pressure Treated Lumber. Use stainless steel when maximum corrosion resistance is required. DA Style Finish Nails Fit the Following Tools: (Please...

                                        Senco L10BABN Narrow Crown Staples
                                        Price: $16.21
                                        Availability: Out of Stock
                                        Senco Item #: L10BABN -

                                          Senco L10BABN L-Series, 5/8" Long, 18-Gauge, 1/4" Narrow Crown Electro Galvanized Stapler for Cabinets, Casebacks, Decorative Trim, Drawers, Fascia and Soffits, Hardwood Flooring, Insulative Sheathing, Lattice, Molding, Spring Attachment-Upholstery, Trim, and Underlayment. Tools That Use L-Series Staples Senco:SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450 Hitachi: N3804AB, N3804A Makita: AT63A Duo-Fast: KN1848A, KN1848 Porter Cable: NS150A, NS150, NS100 OTHERS: Accuset: A100LS, A150LS,...

                                          Senco M001003 1-1/2" 16ga. straight finish nails
                                          Price: $11.75
                                          Availability: Stock
                                          Senco Item #: M001003 -

                                            The M001003 Senco 1-1/2" long x 16 Gauge Straight Finish Nails are made from electro galvanized wire with Sencote coating for easier driving and more holding power. Best for furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels. Senco 16 Gauge Finish Nails fit the following tools: Senco: AirFree32, FinishPro32 Accuset: A250SM Craftsman: 18431 Dewalt: D51256K Hitachi: NT65A, NT65MA2 Paslode: 3250-F16, IM250F Porter Cable: FN250A ...

                                            10d Dark Brown Stainless Steel Painted Coil Nails
                                            Price: $248.82
                                            Availability: Stock
                                            Simpson Strong-Tie Item #: COIL10BRN -

                                              Head is Painted Dark Brown! The Simpson Strong-Tie 3" x .120" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 1,800 nails per box Head Color - Dark Brown Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

                                              Hy-Tek Screw Shank Gun Nails
                                              Price: $93.26
                                              Availability: Stock
                                              Hy-Tek Fasteners Item #: 12030HDG -

                                                Hy-Tek 12030HDG 3" x .120" Hot Dipped Galvanized Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. For more information regarding the...

                                                Metal Connector Pneumatic Strip Nails
                                                Price: $48.10
                                                Availability: Stock
                                                Misc Brands Item #: FHNPJH212x148 -

                                                  This 2-1/2" x .148 Bright Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please Note: Consult your...

                                                  Industrial Pneumatic Nails and Staples