Login/Register
Shopping Cart
OR
Filter
Sort By
These 1/2" x 7" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary...
These 1/2" x 7" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
3/4" - 10 Zinc Plated Hex Nuts for either 3/4" machine bolts or all thread rod. Uses 1-1/8" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or...
3/4" - 10 Zinc Plated Hex Nuts for either 3/4" machine bolts or all thread rod. Uses 1-1/8" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or threaded rod. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...
BP58-2 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and...
BP58-2 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and should not be used with ACQ lumber. Hole Size: 11/16" Dimension: 2" x 2" Thickness: 3/16" Coating: None Mild Steel Imported Picture may not match product exactly Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our...
These 5/8" x 12" zinc plated all thread rods when used with a 5/8" coupling nut can be used for extending machine bolts or any other 5/8" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated...
These 5/8" x 12" zinc plated all thread rods when used with a 5/8" coupling nut can be used for extending machine bolts or any other 5/8" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated Special lengths available upon request Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments....
Grip-Rite GRA1914 A19-1/4" staples fit the Rapid R19 stapler as well as other A19 style hammer tackers on the market. These staples are ideal for installing thin material such as window flashing and...
Grip-Rite GRA1914 A19-1/4" staples fit the Rapid R19 stapler as well as other A19 style hammer tackers on the market. These staples are ideal for installing thin material such as window flashing and housewraps. There are 5,000 staples in each box. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock or do not have enough inventory to complete...
The GRK R49212XL 2-1/2" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast...
The GRK R49212XL 2-1/2" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast Bite Tip eliminates pre-drilling and provides a fast start for one step installation. Combined with the W-Cut™ low installation torque allows these screws are installed quickly and accurately. The GRK Climatek™ coating provides superior corrosion resistance, allowing the screw to be used in...
The Simpson S11A250CNJ 2-1/2" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head on this unpainted nail is a standard flat head. The checker pattern...
The Simpson S11A250CNJ 2-1/2" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head on this unpainted nail is a standard flat head. The checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank 21º Collated Nails are designed to fit in the following tool. Please...
Head is Painted Sienna! The Simpson Strong-Tie 2-1/4" x .092" Sienna Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding...
Head is Painted Sienna! The Simpson Strong-Tie 2-1/4" x .092" Sienna Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Sienna Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD10112 #10 x 1-1/2"...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD10112 #10 x 1-1/2" structural connector screws are approved to replace nails in certain Simpson Strong-Tie Connectors. The advantages of using screws can be ease of installation in tight spots and less vibration when installing connectors during remodel projects. The shank of the SD9112 screws are designed to easily fit...
Simpson Strong-Tie 10D5HDG-R 3" x .148" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. There are 250 nails in the 5 lb. pack....
Simpson Strong-Tie 10D5HDG-R 3" x .148" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. There are 250 nails in the 5 lb. pack. The nails are hot dipped galvanized, providing medium corrosion protection. 10D5HDG-R Information and Data Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average coating...
The Simpson Strong-Tie DSVR312R5LB #10 x 3-1/2" Deck Drive™ Red Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and...
The Simpson Strong-Tie DSVR312R5LB #10 x 3-1/2" Deck Drive™ Red Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Also DSV screws are available in collated strips for use in the Quik Drive® auto-feed screw driving...
Simpson Strong-Tie PDPAWL-150 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...
Simpson Strong-Tie PDPAWL-150 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 1-1/2" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...
The Simpson Strong-Tie Quik Drive® WSV2S #9 x 2" Screws are ideal for screwing wood-to-wood when their is little concern about corrosion of the fasteners. The most common use of these screws is...
The Simpson Strong-Tie Quik Drive® WSV2S #9 x 2" Screws are ideal for screwing wood-to-wood when their is little concern about corrosion of the fasteners. The most common use of these screws is for subfloor applications because the screw creates a very tight connection between the plywood and joist. Using a StrongDrive® Automatic Tool with a 20" extension saves time and labor thus saving you money. Redesigned tip and thread pattern provides easy starts and up to 25% less torque while...
The Simpson T15N150SFB 1-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...
The Simpson T15N150SFB 1-1/2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...
The Simpson T9A150MCN 1-1/2" x .148" Type 316 Stainless Steel Metal Connector Nails is designed to be used in 31/33 Degree Metal Connector Tools for installing Simpson Strong-Tie structural...
The Simpson T9A150MCN 1-1/2" x .148" Type 316 Stainless Steel Metal Connector Nails is designed to be used in 31/33 Degree Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Please Note: Consult your manufacturer's catalog to determine the...
The Simpson Strong-Tie THD37300H4SS Type 304 Stainless Steel 3/8" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD37300H4SS Type 304 Stainless Steel 3/8" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...