Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie THDB25412CS 1/4" x 4-1/2" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...
The Simpson Strong-Tie THDB25412CS 1/4" x 4-1/2" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...
The Simpson Strong-Tie TNT18134TF Titen Turbo™ 3/16" x 1-3/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the...
The Simpson Strong-Tie TNT18134TF Titen Turbo™ 3/16" x 1-3/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping...
These 1/2" x 10" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length...
These 1/2" x 10" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...
These 1/2" x 8" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary...
These 1/2" x 8" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
3/4" - 10 Hot Dipped Galvanized Hex Nuts for either 3/4" HDG machine bolts or all thread rod. Uses 1-1/8" socket to install. Important: These HDG hex nuts will only fit hot galvanized bolts or...
3/4" - 10 Hot Dipped Galvanized Hex Nuts for either 3/4" HDG machine bolts or all thread rod. Uses 1-1/8" socket to install. Important: These HDG hex nuts will only fit hot galvanized bolts or threaded rod. Do NOT use on plain or zinc plated bolts. Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average coating weight is 2.0 oz./ft2 (per ASTM A123 total both sides)....
3/4" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 3/4" bolt heads and nuts from...
3/4" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 3/4" bolt heads and nuts from pulling into the wood. These washers are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Bolt Hole Size: 13/16" Approximate Outside Diameter: 2-15/16" Approximate Washer Thickness: 3/8" Coating: None Explanation of "Stock" Availability Term Stock...
3/4" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and...
3/4" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 3/4" Inside Diameter: 13/16" Outside Diameter: 2" Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
BP58-2HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot...
BP58-2HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot dipped galvanized to protect the washer from corrosion when exposed to the elements as well as coming in contact with ACQ lumber. Hole Size: 11/16" Dimension: 2" x 2" Thickness: 3/16" Coating: Hot Dipped Galvanized Mild Steel Imported Picture may not match product exactly Hot Dipped Galvanized...
These 5/8" x 12" hot dipped galvanized all thread rods when used with a 5/8" HDG coupling nut can be used for extending HDG machine bolts and HDG all thread rod. They can also sometimes be used as...
These 5/8" x 12" hot dipped galvanized all thread rods when used with a 5/8" HDG coupling nut can be used for extending HDG machine bolts and HDG all thread rod. They can also sometimes be used as an anchor bolt substitution (Consult your structural engineer first). Hot dipped galvanizing provides extra protection when contacting ACQ lumber. Please Note: This all thread is cut in our own shop. Bare ends are painted with galvanizing spray paint. A307 Grade 2 Hot Dipped Galvanized Special...
No Predrilling. Stronger than 3/8" Lags! The FMTLOK10 10" FastenMaster® TimberLok® Heavy Duty Wood Screw can replace 3/8" lag screws and enables you to complete wood-to-wood projects faster,...
No Predrilling. Stronger than 3/8" Lags! The FMTLOK10 10" FastenMaster® TimberLok® Heavy Duty Wood Screw can replace 3/8" lag screws and enables you to complete wood-to-wood projects faster, easier and stronger. All design values based on 1-1/2" side member thickness and penetration into main member as follows; TimberLok 2", Nails 10x diameter, Lags 8x diameter. Design values may be subject to adjustment factors (section 10.3 in NDS) based on conditions existing during installation as...
GRK's 3-1/8" x #8 Trim Head Finish screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more. The small head shape easily countersinks...
GRK's 3-1/8" x #8 Trim Head Finish screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more. The small head shape easily countersinks leaving a small hole to fill. The small head and W-Cut™ thread design limits splitting problems in your finished product. Recessed Star Drive: Zero Stripping, with 6 points of contactTrim head: for a clean finished lookW-Cut™: Low torque, smoother driveZip-Tip™: No pre-drilling,...
The GRK R49318PP 3-1/8" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast...
The GRK R49318PP 3-1/8" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast Bite Tip eliminates pre-drilling and provides a fast start for one step installation. Combined with the W-Cut™ low installation torque allows these screws are installed quickly and accurately. The GRK Climatek™ coating provides superior corrosion resistance, allowing the screw to be used in...
The Quick Build Pro 158DWSCCYB #6 x 1-5/8" Yellow Zinc Coarse Drywall Screws are ideal for wood-to-wood or drywall to wood connections when no corrosion resistance is required. Yellow Zinc screws...
The Quick Build Pro 158DWSCCYB #6 x 1-5/8" Yellow Zinc Coarse Drywall Screws are ideal for wood-to-wood or drywall to wood connections when no corrosion resistance is required. Yellow Zinc screws are used mostly where the gold colored head is desired. Packaged in a box of approximately 5,000 screws when you require larger amounts to get the job done. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or...
The Simpson S10A325CNJ 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head on this unpainted nail is a standard flat head. The checker pattern...
The Simpson S10A325CNJ 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head on this unpainted nail is a standard flat head. The checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank 21º Collated Nails are designed to fit in the following tool. Please...
Head is Painted Sienna! The Simpson Strong-Tie 3" x .120" Sienna Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from...
Head is Painted Sienna! The Simpson Strong-Tie 3" x .120" Sienna Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 1,800 nails per box Head Color - Sienna Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight and...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD10212 #10 x 2-1/2"...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. Simpson Strong-Drive SD10212 #10 x 2-1/2" structural connector screws are approved to replace nails in certain Simpson Strong-Tie Connectors. The advantages of using screws can be ease of installation in tight spots and less vibration when installing connectors during remodel projects. The shank of the SD9112 screws are designed to easily fit...