Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie TA9ZKT Staircase Angle Kit are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily...
Simpson Strong-Tie TA9ZKT Staircase Angle Kit are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: Kit includes two (2) angles with ten (10) SDS25112 Screws Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (2) Stringer, (3) Tread (Max) SDS25112 Screws - (3) Stringer, (2) Tread...
The Simpson Strong-Tie VPA35 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/4" or 2-5/16" wide rafters to the top plate. It will adjust to...
The Simpson Strong-Tie VPA35 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/4" or 2-5/16" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 2-5/16" Actual Joist...
The Simpson Strong-Tie A24Z ZMax® Framing Clips for various wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Material: 12 Gauge Finish:...
The Simpson Strong-Tie A24Z ZMax® Framing Clips for various wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Material: 12 Gauge Finish: ZMax® G-185 Coating Length (L): 2-1/2" Flange #1 (W1): 3-7/8" Flange #2 (W2): 2" Fasteners: (2) 1/2" machine Bolts A24Z Information and Installation Instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than...
The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure...
The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. Material: 18 Gauge Finish: Standard G90 Length: 4-1/2" Flange Widths: 1-7/16" Fasteners: (9-12) 8d x 1-1/2" (9-12) SD #9 x 1-1/2" A35 Information and Installation...
The Simpson Strong-Tie DSC5R-SDS3HDG Hot Dipped Galvanized Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed...
The Simpson Strong-Tie DSC5R-SDS3HDG Hot Dipped Galvanized Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. The DSC5R-SDS3 series drag strut connectors requires 40% less fasteners than the DSC4L connector but gets 12% higher loads. Material: 3 gauge Finish: Hot Dipped Galvanized Dimensions: 21" (Length) x 3" (Flanges) Included Fasteners: (24) SDS...
The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip...
The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (10) 8d x 1-1/2" Nails or (10) SD9 x 1-1/2" Screws H2.5A Information and Installation Instructions. Standard G90 Zinc Galvanized...
Simpson Strong-Tie HL35HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35HDG to connect lumber...
Simpson Strong-Tie HL35HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 5" (L) Bolt Holes: (4) 1/2" HL35HDG Heavy Angle Information and...
The Simpson Strong-Tie LS70 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time....
The Simpson Strong-Tie LS70 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS70 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Zinc Galvanizing Length: 6-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (10) 10d x 1-1/2" Nails LS70 Information and Installation Instructions...
Simpson Strong-Tie TA9SS Stainless Steel Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9SS angles...
Simpson Strong-Tie TA9SS Stainless Steel Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9SS angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: Type 316L Stainless Steel Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (2) Stringer, (3) Tread (Max) SDS25112 Screws - (3) Stringer, (2) Tread...
The Simpson Strong-Tie VPA3 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/2" or 2-9/16" wide rafters to the top plate. It will adjust to...
The Simpson Strong-Tie VPA3 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/2" or 2-9/16" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 2-9/16" Actual Joist...
Save by Purchasing a Pallet of 96 Boxes! The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely...
Save by Purchasing a Pallet of 96 Boxes! The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. Material: 18 Gauge Finish: Standard G90 Length: 4-1/2" Flange Widths: 1-7/16" Fasteners: (9-12) 8d x 1-1/2" (9-12) SD #9 x...
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top...
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (10) 8d x 1-1/2" Nails or (10) SD9 x 1-1/2" Screws H2.5A Information and Installation...
Simpson Strong-Tie HL35PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35PC to connect lumber to concrete...
Simpson Strong-Tie HL35PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Please Note: This angle is available with a gusset as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead...
The Simpson Strong-Tie HTC4 Double Slotted Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The HTC4 has three 2-1/2" slots that will permit the truss chord...
The Simpson Strong-Tie HTC4 Double Slotted Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The HTC4 has three 2-1/2" slots that will permit the truss chord to move vertically when loads are applied to the roof. This connector has high lateral capacity and can be used on 2 x 4 and 2 x 6 top plates Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (9) .148 x 3" Nails HTC4 Information and Installation Instructions Standard G90 Zinc Galvanized...
The Simpson Strong-Tie L70 Reinforcing Angle is a 7" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The...
The Simpson Strong-Tie L70 Reinforcing Angle is a 7" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L70 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Galvanizing Length: 7" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (8) 10d x 1-1/2" Nails or (8) SD #10 x 1-1/2" Screws L70 Information and...
The Simpson Strong-Tie LS70Z Skewable Reinforcing Angles with ZMax® Protection Coating are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS...
The Simpson Strong-Tie LS70Z Skewable Reinforcing Angles with ZMax® Protection Coating are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS70Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: ZMax® Coating Length: 6-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (10) 10d x 1-1/2" Nails LS70Z Information and...