Products 1-7 of 7
Item #: HE784 -
Henry Company Aqua-Bloc® WB Elastomeric Asphalt Emulsion Waterproofing is a single component, cold applies rubberized asphalt emulsion which cures to provide a heavy duty "seamless", rubber-like membrane for use in waterproofing and damp-proofing concrete and masonry surfaces above and below grade. The elastomeric membrane formed is characterized by its high solids content while retaining a relatively high degree of workability. Water-based and low VOC Seamless low modulus elastomeric...
Item #: HEWP200937 -
Water under hydrostatic pressure will find a way into your structure unless you use an effective waterproofing system to keep it out. Henry Blueskin® WP 200 Self-Adhesive Waterproofing Membrane can create the seal that you need to keep your structure protected. Blueskin® WP200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a...
Item #: JSICEGUARD -
Protecto Wrap's Jiffy Seal® Ice & Water Guard HT protects your roofs from ice dams and wind driven rain. Protecto Wrap's Jiffy Seal® Ice & Water Guard HT features a proprietary rubberized asphalt/butyl hybrid adhesive. The butyl component contains the same 100% recycled post-consumer material base as Protecto Wrap's butyl adhesive. Butyl Hybrid adhesive shares the same high temperature limitation as the Protecto Wrap rubberized asphalt adhesive (250°F) as well as the same chemical...
Item #: 250GC -
TREMproof® 250GC is a rapid-curing, high solids, VOC compliant modified polyurethane waterproofing membrane that can be applied to damp and green concrete. This roller grade TREMproof 250GC is a one-part moisture curing elastomer that can be applied in as little as 24 hours after you have stripped the forms. This helps eliminates delays to your project while waiting for the concrete wall to cure. TREMproof 250GC is designed for use on backfilled walls, split slab applications, planters and...
Availability: Out of Stock
BASF - MasterSeal
Item #: HLM5000R -
HLM 5000 Roller Grade Liquid, Cold-applied Elastomeric Waterproofing is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. Standard and high-build systems: Provides specification versatility and extended warranty Waterproof: Protects concrete structures from water penetration Elastomeric: Permits expansion and contraction Wide service-temperature range: Suitable for all climates Chemical...
Item #: XYP20 -
Xypex Concentrate in a 20 lb. is a unique chemical treatment for the waterproofing, protection and repair of concrete. The 20 lb. pail is ideal for small projects of 120 sg. ft or less. Rule of thumb is 6-7 sq. ft per pound but may vary depending on the surface. Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete,...
Item #: HE545046 -
Henry 545 Aquatac™ Foundation Primer is a polymer emulsion based primer for self-adhesive membranes. Primers are used to prepare substrates by binding loose dust. The primer helps by leaving a tacky residual film to which the self - adhesive surface of the membrane is applied to improve overall adhesion to the substrate. Henry 545 Aquatac™ Foundation Primer covers 500 square feet per gallon depending on porosity of the substrate. Quick drying Environmentally friendly due to low VOC...