Simpson Connectors

Simpson Strong Tie HUS1.81/10 1-3/4" x 9" Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 8-7/8" (Height) x 3" (Seat Depth) Fastener Options: (30) 16d Nails or SD10212 Screws(Header) (10) 16d Nails...

The Simpson Strong-Tie SD10112DBB #10 x 1-1/2" Outdoor Accents® connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor Accents APA21 90-degree angle, the screw's black finish accents any outdoor living project. The sharp point of the screw enables fast starts, and the patented serrated threads reduce torque for improved drivability. Use with Outdoor Accents® connectors (sold separately) for a decorative look. 1/4"...

The geometry of the Simpson Strong-Tie SB5/8x24 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 6" wide concrete stem wall without creating excessive horizontal forces. The SB5/8x24 is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled thread for higher...

The Simpson Strong-Tie A21 Framing Clips for various wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 1-3/8" Flange #1 (W1): 2" Flange #2 (W2): 1-1/2" Fasteners: (4) 10d x 1-1/2" Nails or(4) SD9112 Screws A21 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low...

The Simpson Strong-Tie A34 Framing Clips for wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...

The Simpson Strong-Tie ABU44Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44Z features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 16 Gauge Strap Material: 12 Gauge Dimensions: (W)...

The Simpson Strong-Tie ABW44Z for 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW44Z allows...

The Simpson Strong-Tie AC4 Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 6-1/2" (L) Fastener Options: Beam...(8) .162 x 3-1/2" Nails (Min) Beam...(14) .162 x 3-1/2" Nails (Max) Post...(8) .162 x 3-1/2" Nails (Min) Post...(14) .162 x 3-1/2" Nails (Max) Post and Beam...(28) SD10 x 1-1/2" (Max) AC4 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

Simpson Strong-Tie Outdoor Accents® APA21 angles tie together beams, rafters and more. The APA21 angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Install with Outdoor Accents® structural screws and hex-head washer (sold separately) for a decorative look. Stronger than angled nailing or screw fastening alone for outdoor living or home...

Simpson Strong-Tie Mission Outdoor Accents® APB44 post bases secure a 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization over a black powder coat for extra corrosion resistance. APB44 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet stringent building codes for...

The Simpson Strong-Tie APDJT2-4 Deck Joist Tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood screws and hex-head washers (sold separately) for a decorative look Material: 12 Gauge Steel Coating: ZMax® galvanized with a...

Simpson Strong-Tie Outdoor Accents® APHH46 concealed flange heavy hangers connect 4 x 6 or 4 x 8 beams to girders or ledgers. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APHH46 heavy hanger installs easily with the Outdoor Accents® SDWS22312DBB connector screws and STN22 hex-head washers. Use Strong-Drive SDS25300 Heavy-Duty Connector screws to connect to the header Install with Outdoor Accents®...

Simpson Strong-Tie Mission Outdoor Accents® flat APL4 "L" straps bring decorative appeal and lateral strength to any outdoor living space like patio covers, gazebos and more. The APL4 "L" provide reinforcement for a connection where two 4x or larger lumber pieces intersect at a 90-degree angle. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Install with Outdoor Accents® structural screws and hex-head washer (sold separately) for a...

Simpson Strong-Tie Outdoor Accents® APLH24 concealed flange light hangers connect 2x4 joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. The APLH24 hanger installs easily with the Outdoor Accents® connector screw. Install with Outdoor Accents® SD10112DBB structural screws for a decorative look and meet required load values. Designed for use with 2x4 joists. Material: 14 Gauge Steel Coating:...

The Simpson Strong-Tie Outdoor Accents® APRTR Decorative Rigid Tie connects a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX® galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents Accessories line, this decorative hardware connector can be used with either the Mission Collection® or Avant Collection™,...

The Simpson BC4 Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 3-9/16" (L) Fastener Options: (12) 16d or (12) SD10 x 1-1/2" BC4 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...

The Simpson Strong-Tie BC40 Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 3-9/16" x (L) 3-1/4" x (H) 2-1/4" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC40 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This...

Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x 3-1/2") Strap: 10 Ga. x 2-1/4" Wide x 8-3/8" High CBSQ44 Information and Installation...

The Simpson Strong-Tie CBT2Z Concealed Beam Tie combines structural strength with invisibility for applications that call for concealed joinery rather than standard beam-to-post connections. Whether you’re designing for a custom indoor or outdoor living space, the tubular shape of the CBTZ allows an easy-to-install beam-to-post connection using common tools. The CBT2Z is designed to connect beams and posts of a variety of sizes. The CBT2Z accommodates a minimum 4x4 post and 4x6 beam using four...

The Simpson Strong-Tie CJT3ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3ZS short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 6 Glulam Beam - 3-1/8" x 7-1/2" PSL - 3-1/2 x...

Simpson Strong-Tie CMST12 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMST12 are approved for use with SD Screws as a nail substitution. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3" (Wide) x 40' (Length) Fasteners: 10d or 16d depending on end length and material (See information link below) CMST12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...

The CPT44Z concealed 4 x 4 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 2-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT44Z is tested and load-rated for uplift,...

The Simpson Strong-Tie DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2L-SDS3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...