Mag-Bit

The Mag-Bit 786.18.1016 5/8" x 18" Bell Hanger Bits are made of high carbon steel for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling. This bit also works well for drilling through wood when you will also be hitting some metal such as when drilling column caps. High carbon steel Fish eye hole for pulling wire Works well for drilling wood when you are going to hit metal 7/16" Shank 18" Length Mag-Bit Website...

The Mag-Bit 786.18.1216 3/4" x 18" Bell Hanger Bits are made of high carbon steel for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling. This bit also works well for drilling through wood when you will also be hitting some metal such as when drilling column caps. High carbon steel Fish eye hole for pulling wire Works well for drilling wood when you are going to hit metal 7/16" Shank 18" Length Mag-Bit Website...

The Mag-Bit 786.18.1316 13/16" x 18" Bell Hanger Bits are made of high carbon steel for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling. This bit also works well for drilling through wood when you will also be hitting some metal such as when drilling column caps. High carbon steel Fish eye hole for pulling wire Works well for drilling wood when you are going to hit metal 7/16" Shank 18" Length Mag-Bit Website...

The Mag-Bit 786.18.1416 7/8" x 18" Bell Hanger Bits are made of high carbon steel for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling. This bit also works well for drilling through wood when you will also be hitting some metal such as when drilling column caps. High carbon steel Fish eye hole for pulling wire Works well for drilling wood when you are going to hit metal 7/16" Shank 18" Length Mag-Bit Website...

The Mag-Bit 701.0816 1/2" x 7-7/8" Single Spur Short Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. The shorter length of the Mag-Bit 701 series allows you to get into tighter spaces like between wall studs. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed to...

The Mag-Bit 710.1016 5/8" x 18" Single Spur Long Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. This bit will drill fast and clean through wood but should not be used if you are going to hit nails or metal. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed to...

The Mag-Bit 701.1016 5/8" x 7-7/8" Single Spur Short Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. The shorter length of the Mag-Bit 701 series allows you to get into tighter spaces like between wall studs. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed to...

The Mag-Bit 710.1216 3/4" x 18" Single Spur Long Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. This bit will drill fast and clean through wood but should not be used if you are going to hit nails or metal. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed to...

The Mag-Bit 701.1216 3/4" x 7-7/8" Single Spur Short Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. The shorter length of the Mag-Bit 701 series allows you to get into tighter spaces like between wall studs. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed to...

The Mag-Bit 701.1416 7/8" x 7-7/8" Single Spur Short Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. The shorter length of the Mag-Bit 701 series allows you to get into tighter spaces like between wall studs. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed to...

The Mag-Bit 710.1416 7/8" x 18" Single Spur Long Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. This bit will drill fast and clean through wood but should not be used if you are going to hit nails or metal. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed to...

The Mag-Bit 710.2016 1-1/4" x 18" Single Spur Long Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. This bit will drill fast and clean through wood but should not be used if you are going to hit nails or metal. Single Spur Auger Bits: The heads of these bits are very different from Ship Head Auger Bits. As the name implies, they have a spur that protrudes from the outer diameter of the head. This is designed...