Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various...
Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various trusses. Additionally you can have the HTU26 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...
Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load...
Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener Options: (12) 16d Nails (Header-Min) (4) 10d Nails (Joist-Min) (16) 16d Nails (Header-Max) (6) 10d Nails (Joist-Max) HU1.81/5 Information and Installation...
Simpson Strong-Tie IUS1.81/9.5 is used to install 1-3/4" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS1.81/9.5 is used to install 1-3/4" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS1.81/9.5 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson MIU1.81/9.5 hanger is designed to hang 1-3/4" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/9.5 features...
The Simpson MIU1.81/9.5 hanger is designed to hang 1-3/4" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/9.5 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong-Tie HTU26-2 Double 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26-2 hanger very versatile for...
Simpson Strong-Tie HTU26-2 Double 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26-2 hanger very versatile for various trusses. Additionally you can have the HTU26-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...
Simpson Strong Tie face mount HU2.1/9 I-Joist Hanger is designed for hanging 2-1/16" x 9-1/2" I Joist. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 2-1/8" (Wide) x 9-3/16"...
Simpson Strong Tie face mount HU2.1/9 I-Joist Hanger is designed for hanging 2-1/16" x 9-1/2" I Joist. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 2-1/8" (Wide) x 9-3/16" (Height) x 2-1/2" (Seat Depth) Fastener Options: (14) .162" x 3-1/2" Nails (Header) (6) .148" x 1-1/2" Nails (Joist) HU2.1/9 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...
Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging...
Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS1.81/11.88 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
The Simpson MIU1.81/11 hanger is designed to hang 1-3/4" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/11 features...
The Simpson MIU1.81/11 hanger is designed to hang 1-3/4" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong-Tie HTU28 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28 hanger very versatile for various...
Simpson Strong-Tie HTU28 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28 hanger very versatile for various trusses. Additionally you can have the HTU28 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS1.81/11.88 Information and Installation...
The Simpson MIU1.81/14 hanger is designed to hang 1-3/4" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/14 features positive-angle...
The Simpson MIU1.81/14 hanger is designed to hang 1-3/4" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for...
Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for various trusses. Additionally you can have the HTU28-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...