Products 1-24 of 50
Show
Spotlight!
Availability: Stock
Oztec Vibrators
Item #: 1.2 OZ -
Tough, Rugged, and Durable! Oztec 1.2 OZ 1.25 Horsepower Electric Motors are manufactured to exacting specifications to withstand the rough everyday abuses associated with all construction sites. Lightweight, compact and fitted with a comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. The maximum steel head allowed using this 1.25 HP motor is 1-1/2" diameter. Use the Oztec Vibrator Selection Chart to help you figure what system works best...
Availability: Stock
Oztec Vibrators
Item #: 217A1 -
The Oztec 217A1 "Quick Disconnect Coupler" allows shaft removal from the power unit with the twist of a lever. The lightweight and bearing-less coupling allows the job to be done in seconds without any tools. This fitting will not rust or seize. However the coupler will wear out or break occasionally therefore requiring a replacement.
Spotlight!
Availability: Out of Stock
Oztec Vibrators
Item #: BP-35 -
Powerful, portable and reliable! The Oztec BP-35 gas power units, provides ultimate and immediate adaptability on the job. Utilizing a rugged and dependable 1-3/4HP Honda gasoline engine, coupled to Oztec's "speed-up" transmission, vibrator heads develop 12,000 vpm and never drop below 10,000vpm...Even in the heaviest low slump concrete loads. (Tested in near 0 slump concrete). This 10,000 - 12,000vpm range is essential for high-quality concrete. (Direct drive units "scream", have short lives...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: FS 02 OZ -
Oztec Concrete Vibrator 2' FS 02 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: FSP 03 OZ -
Oztec FSP 03 OZ 3' Concrete Vibrator Flexible Pencil Shaft features an inner core that are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Pencil Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are...
Spotlight!
Availability: Stock
Oztec Vibrators
Item #: HP075OZ -
The Oztec HP 075 OZ 3/4" x 12" Steel Concrete Vibrator Head produces the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors as well as the appropiate flexible shaft the results will be exceptional including superior consolidation,...
Spotlight!
Availability: Call For Shipping Quote & Availability
Oztec Vibrators
Item #: 1.8 OZ -
Tough, Rugged, and Durable! Oztec 1.8 OZ 1.75 Horsepower Electric Motors are manufactured to exacting specifications to withstand the rough everyday abuses associated with all construction sites. Lightweight, compact and fitted with a comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. The maximum steel head allowed using this 1.75 HP motor is 1-3/4" diameter. Use the Oztec Vibrator Selection Chart to help you figure what system works best...
Spotlight!
Availability: Out of Stock
Oztec Vibrators
Item #: BP-50A -
Powerful, portable and reliable! The Oztec BP-50A gas power units, provides ultimate and immediate adaptability on the job. Utilizing a rugged and dependable 2-1/2 HP Honda gasoline engine, coupled to Oztec's "speed-up" transmission, vibrator heads develop 12,000 vpm and never drop below 10,000vpm...Even in the heaviest low slump concrete loads. (Tested in near 0 slump concrete). This 10,000 - 12,000vpm range is essential for high-quality concrete. (Direct drive units "scream", have short...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: FS 05 OZ -
Oztec Concrete Vibrator 5' FS 05 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: FSP 06 OZ -
Oztec FSP 06 OZ 6' Concrete Vibrator Flexible Pencil Shaft features an inner core that are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Pencil Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: HSP075OZ -
Helps vibrate difficult openings and consolidate slabs! The Oztec HSP 075 OZ 3/4" x 8" Steel Concrete Vibrator Short Head produces the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors as well as the appropiate flexible shaft the results...
Availability: Stock
Oztec Vibrators
Item #: OZQDKIT -
The Oztec OZQDKIT "Quick Disconnect" Replacement Kit has all the parts you need to allow shaft removal from the power unit with the twist of a lever. The lightweight and bearing-less coupling allows the job to be done in seconds without any tools. This fitting will not rust or seize. However the coupler will wear out or break occasionally therefore requiring a replacement.
Spotlight!
Availability: Call For Shipping Quote & Availability
Oztec Vibrators
Item #: 2.4 OZ -
Tough, Rugged, and Durable! Oztec 2.4 OZ 2.25 Horsepower Electric Motors are manufactured to exacting specifications to withstand the rough everyday abuses associated with all construction sites. Lightweight, compact and fitted with a comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. The maximum steel head allowed using this 2.25 HP motor is 2" diameter. Use the Oztec Vibrator Selection Chart to help you figure what system works best for...
Availability: Ships Direct
Oztec Vibrators
Item #: 6725A1 -
The Oztec 6725A1 Flexible Shaft Connector allows you to connect standard Oztec flexible shafts up to 42' in length. Please Note: Pencil shafts cannot be extended with this coupler but can be attached to a standard shaft at the end.
Spotlight!
Availability: Stock
Oztec Vibrators
Item #: FS 07 OZ -
Oztec Concrete Vibrator 7' FS 07 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: FSP 09 OZ -
Oztec FSP 09 OZ 9' Concrete Vibrator Flexible Pencil Shaft features an inner core that are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Pencil Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: 3.2 OZ -
Tough, Rugged, and Durable! Oztec 3.25 Horsepower Electric Motors are manufactured to exacting specifications to withstand the rough everyday abuses associated with all construction sites. Lightweight, compact and fitted with a comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. The maximum steel head allowed using this 3.25 HP motor is 2-1/2" diameter. Use the Oztec Vibrator Selection Chart to help you figure what system works best for your...
Spotlight!
Availability: Stock
Oztec Vibrators
Item #: FS 10 OZ -
Oztec Concrete Vibrator 10' FS 10 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec...
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: FSP 11 OZ -
Oztec FSP 11 OZ 11' Concrete Vibrator Flexible Pencil Shaft features an inner core that are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Pencil Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are...
Spotlight!
Availability: Stock
Oztec Vibrators
Item #: H100OZ -
The Oztec H 100 OZ 1" x 13" Steel Concrete Vibrator Head produces the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors as well as the appropiate flexible shaft the results will be exceptional including superior consolidation, increased...
Availability: Ships Direct
Oztec Vibrators
Item #: CORE2 -
The Oztec C 02 OZ Flexible Shaft 2' Inner Core is made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. Please Note: This core is a replacement core for the Oztec FS 02 OZ Flexible Shaft only.
Spotlight!
Availability: Ships Direct
Oztec Vibrators
Item #: FSP 15 OZ -
Oztec FSP 15 OZ 15' Concrete Vibrator Flexible Pencil Shaft features an inner core that are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Pencil Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are...
Spotlight!
Availability: Stock
Oztec Vibrators
Item #: H125OZ -
The Oztec H 125 OZ 1-1/4" x 13" Steel Concrete Vibrator Head produces the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors as well as the appropiate flexible shaft the results will be exceptional including superior consolidation,...
Availability: Ships Direct
Oztec Vibrators
Item #: CORE3P -
The Oztec CP 03 OZ Flexible Shaft 3' Inner Core is made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. Please Note: This core is a replacement core for the Oztec FSP 03 OZ Flexible Pencil Shaft Only.