Login/Register
Shopping Cart
OR
Filter
Sort By
The Marshalltown 18" x 3-1/2" 4528D Laminated Resin Float with DuraSoft Handle will work the slab like a wood float but give you many times the use. This Marshalltown resin float is made from 3/8"...
The Marshalltown 18" x 3-1/2" 4528D Laminated Resin Float with DuraSoft Handle will work the slab like a wood float but give you many times the use. This Marshalltown resin float is made from 3/8" thick laminated canvas resin that leaves a smooth finish and still allows bleeding water to evaporate. The resilient DuraSoft handle provides a soft feel, reduces fatigue, and offers excellent durability. Made in the USA with Global Materials. Made from 3/8" thick laminated canvas resin Extremely...
Features a threaded male end Modifies push button handle sections for use with tools which require a threaded end; such as bull floats, concrete brooms, and other tools Can be used with our 1-3/8"...
Features a threaded male end Modifies push button handle sections for use with tools which require a threaded end; such as bull floats, concrete brooms, and other tools Can be used with our 1-3/8" Push Button Handles Diameter 1 3/8" Made in the U.S.A. Please Note: Full case quantities may ship directly from the vendor which may delay shipping 1-3 days. Additionally USPS may not be available as a shipping method depending on the vendor's policies. Please call 800-323-2999 if you...
The Marshalltown CE562B 6" x 6" x 1/2" Radius x 5/8" Lip Blue Steel Hand Edger Best Value Edger are used to produce a smooth 1/2" radius at the edge of a concrete slab to prevent the edge from...
The Marshalltown CE562B 6" x 6" x 1/2" Radius x 5/8" Lip Blue Steel Hand Edger Best Value Edger are used to produce a smooth 1/2" radius at the edge of a concrete slab to prevent the edge from chipping. High grade blue steel blade Sturdy steel mounting Wooden handle Straight ends Used to produce a radius at the edge of a concrete slab to prevent the edge from chipping Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from...
The Marshalltown SP12SDS3 12" x 3-1/2" Pool Trowel with a Durasoft Handle features a 3 1/4" mounting so the blade has plenty of flexibility to conform to most radius. Highest grade hardened and...
The Marshalltown SP12SDS3 12" x 3-1/2" Pool Trowel with a Durasoft Handle features a 3 1/4" mounting so the blade has plenty of flexibility to conform to most radius. Highest grade hardened and tempered spring steel blade, properly shaped Short aluminum alloy Xtralite® mounting is lightweight but very strong Blade is flexible enough to bend to almost any radius Resilient Straight DuraSoft® handle, provides soft feel, reduces fatigue 3 Rivets Made in USA with global materials...
OCM 3" or 3-1/4" PCC3.00-3.25 Plastic Rebar Support Chairs are lightweight, yet strong enough to hold up to 600 lbs. Each chair has two height settings for more versatility during installation....
OCM 3" or 3-1/4" PCC3.00-3.25 Plastic Rebar Support Chairs are lightweight, yet strong enough to hold up to 600 lbs. Each chair has two height settings for more versatility during installation. Applications include slab on grade, insulated sandwich panels, vapor barrier, poorly compacted or loose soils. Also, these chairs can support mesh or rebar, and meets current CRSI requirments. Accommodates rebar sizes to 1" in diameter 4-1/8" base diameter Fits up to #8 rebar Will not puncture...
The OCM, Inc Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 3/4" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged in a...
The OCM, Inc Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 3/4" plywood. The OCM, Inc Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The OCM, Inc Spreader Cleat System is excellent for low wall...
OCM STWEGP Snap-Tie Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. The OCM STWEGP Snap-Tie...
OCM STWEGP Snap-Tie Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. The OCM STWEGP Snap-Tie Wedges is a high strength snap tie wedge with a safe working load of 3,325 lbs. It is designed to slip over the head of standard or heavy duty snap ties to provide ample bearing area for proper load distribution into the wales. The wedge can also be applies directly to the plywood when using stubby...
Tough, Rugged, and Durable! Oztec 2.4 OZ 2.25 Horsepower Electric Motors are manufactured to exacting specifications to withstand the rough everyday abuses associated with all construction sites....
Tough, Rugged, and Durable! Oztec 2.4 OZ 2.25 Horsepower Electric Motors are manufactured to exacting specifications to withstand the rough everyday abuses associated with all construction sites. Lightweight, compact and fitted with a comfortable adjustable shoulder strap, this one man power unit will speed through the stiffest concrete. The maximum steel head allowed using this 2.25 HP motor is 2" diameter. Use the Oztec Vibrator Selection Chart to help you figure what system works best for...
The Oztec 6725A1 Flexible Shaft Connector allows you to connect standard Oztec flexible shafts up to 42' in length. Please Note: Pencil shafts cannot be extended with this coupler but can be...
The Oztec 6725A1 Flexible Shaft Connector allows you to connect standard Oztec flexible shafts up to 42' in length. Please Note: Pencil shafts cannot be extended with this coupler but can be attached to a standard shaft at the end. Explanation of "Ships Direct" Availability "Ships Direct" products will ship directly from the manufacturer or vendor. As soon as we receive your order we will send a purchase order directly to the supplier for processing. Depending on the supplier it usually takes...
Oztec Concrete Vibrator 7' FS 07 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple...
Oztec Concrete Vibrator 7' FS 07 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec...
Oztec FSP 09 OZ 9' Concrete Vibrator Flexible Pencil Shaft features an inner core that are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber,...
Oztec FSP 09 OZ 9' Concrete Vibrator Flexible Pencil Shaft features an inner core that are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Pencil Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are...
The Roseburrough Tool WG8123412 Stainless Steel Walking Groover is the ideal tool for creating 1/2" radius and 3/4" deep control joints in slabs using a pole handle system. The wide base and smooth...
The Roseburrough Tool WG8123412 Stainless Steel Walking Groover is the ideal tool for creating 1/2" radius and 3/4" deep control joints in slabs using a pole handle system. The wide base and smooth radius helps prevent chipping while keeping a smooth finish around the joint. 1/2" radius x 3/4" depth Stainless steel blade Creates control joints in concrete Used with a pole system allowing you to create the control joint on large slabs Smooth radius prevents chipping Explanation of "Stock"...
The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...
The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 8". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...
Simpson Strong Tie AnchorMate® 7/8" Anchor Bolt Holders are designed to hold 7/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is...
Simpson Strong Tie AnchorMate® 7/8" Anchor Bolt Holders are designed to hold 7/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is no need for a hex nut during the pour. Additionally and Anchormate® protects the threads from splashed concrete. Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and easy to use....
FASTFOOT® FF62 Fabric Forms eliminated the use of heavy dimensional lumber and plywood when forming footing 24" wide by 13" deep or less. Because of the speed of preparation and tear down the...
FASTFOOT® FF62 Fabric Forms eliminated the use of heavy dimensional lumber and plywood when forming footing 24" wide by 13" deep or less. Because of the speed of preparation and tear down the FASTFOOT® system offers a great labor savings. Prevents Concrete Damage - Fastfoot® is a closed form. There is no concrete damage to screed boards and stakes. This means your 2x4s and stakes can be re-used indefinitely. Adapts to Uneven Ground, Rock - Special colored width lines allow...
The Marshalltown 145D 16" X 3-1/8" Magnesium Float with DuraSoft Handle helps produce a smoother concrete finish than you would get from a wood float. This float is ideal for preparing your concrete...
The Marshalltown 145D 16" X 3-1/8" Magnesium Float with DuraSoft Handle helps produce a smoother concrete finish than you would get from a wood float. This float is ideal for preparing your concrete surface for troweling. The beveled ends offer better balance and weight distribution, helping to achieve a smooth surface. Additionally you get a longer life from the float. Extruded from very hard, durable, lightweight magnesium Comfortable handle is positioned to give the tool perfect balance...