Products 1-9 of 9
Show
Availability: Stock
Newborn Bros
Item #: SLICK-1 -
The Newborn Bros. SLICK-1 Sealant Spatula Set consists of six different knives for smoothing and finishing the joint of your caulking project. It also come equipped with rubber grip and key ring that opens& closes for easy access & storage of each slicker. Rubberized comfort handle Ring keeps all sizes together Round tips for ideal finished joints 6 Sizes for almost any size project Includes: 3" Tapered Slicker - 3/8" Wide 3" Straight Slicker - 5/8" Wide 4" Straight Slicker - 3/4" Wide 5"...
Availability: Stock
Newborn Bros
Item #: PC62 -
This Newborn PC-62 Narrow Bead Plastic Cones is used with the Newborn Brothers Model 620-AL Sausage & Bulk Caulking Gun as well as other Newborn Bulk and Sausage Guns. The plastic cones can be cleaned and reused multiple times if desired. This clear plastic cone should be used for narrow bead applications.
Availability: Stock
Newborn Bros
Item #: PC620 -
These Newborn PC-620 Standard Bead Plastic Cones are used with the Newborn Brothers Model 620-AL Sausage & Bulk Caulking Gun as well as other Newborn Bulk and Sausage Guns. The plastic cones can be cleaned and reused multiple times if desired. This yellow cone should be used for standard or wide bead applications.
Availability: Stock
Simpson Strong-Tie
Item #: EMN22i -
Simpson Strong-Tie EMN22i Mixing Nozzles designed for the proper proportioning and mixing of the SET22, SET-XP22 and ET22 Epoxies. This is a one piece unit with an integrated nut to easily fasten to the cartridge. The EMN22i nozzle ensures the resin and hardener of the applicable Simpson epoxy adhesives are mixed in the proper ratio when dispensing. Additional Simpson Strong-Tie Information If there are any items on the Simpson Strong-Tie Website that you do not see on the DHC Supplies website...
Availability: Stock
Simpson Strong-Tie
Item #: AMN19Q-RP5 -
The Simpson AMN19Q Mixing Nozzles are specifically designed to use with Simpson Acrylic-Tie Adhesives AT-XP13, AT-XP30, AT-XP10, AT10, AT13 and AT30. Package includes 5 nozzles with integrated nut to easily install on AT epoxy cartridge as well as 5 extensions for those hard to reach applications. Additional Simpson Strong-Tie Information If there are any items on the Simpson Strong-Tie Website that you do not see on the DHC Supplies website we will gladly special order them. Most special...
Availability: Stock
Simpson Strong-Tie
Item #: ETB4 -
Simpson Strong-Tie ETB4 Nylon Hole Cleaning Brushes for 3/8" to 7/16" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 8" Brush Length: 3" Hole Diameters: 3/8" to 7/16" Additional Simpson Strong-Tie Information If there are any items on the Simpson...
Availability: Stock
Simpson Strong-Tie
Item #: ETB6 -
Simpson Strong-Tie ETB6 Nylon Hole Cleaning Brushes for 1/2" to 3/4" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 16" Brush Length: 4" Hole Diameters: 1/2" to 3/4" Additional Simpson Strong-Tie Information If there are any items on the Simpson...
Availability: Stock
Simpson Strong-Tie
Item #: ETB8 -
Simpson Strong-Tie ETB8 Nylon Hole Cleaning Brushes for 13/16" to 7/8" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 16" Brush Length: 4" Hole Diameters: 13/16" to 7/8" Additional Simpson Strong-Tie Information If there are any items on the Simpson...
Availability: Stock
Simpson Strong-Tie
Item #: ETB10 -
Simpson Strong-Tie ETB10 Nylon Hole Cleaning Brushes for 1" to 1-1/8" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 29" Brush Length: 6" Hole Diameters: 1" to 1-1/8" Additional Simpson Strong-Tie Information If there are any items on the Simpson...