LTS/MTS/HTS Twist Straps

The 1-1/4" wide x 12" long LTS12 Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: 10d or 10d x 1-1/2" depending on load value required and depth of receiving member (See...

The 1-1/4" wide x 12" long LTS12SS Stainless Steel Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. LTS12SS straps should be used where severe corrosive conditions exist. Material: 18 gauge Finish: Stainless Steel Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: 10d or...

The Simpson Strong-Tie MTS12 1-1/4" Wide x 12" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS12 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length)...

The Simpson Strong-Tie MTS12Z ZMaz® 1-1/4" Wide x 12" Long Medium Twist Strap provides a tension connection between two members. This twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS12 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. ZMax® coating provides corrosion resistance when required. Material: 16 gauge Finish:...

The Simpson Strong-Tie MTS12SS 1-1/4" Wide x 12" Long Stainless Steel Medium Twist Strap provides a tension connection between two members. This twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS12 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-1/4" (Wide) x 12"...

The 1-1/4" wide x 16" long LTS16 Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 16" (Length) Fasteners: 10d or 10d x 1-1/2" depending on load value required and depth of receiving member (See...

The Simpson Strong-Tie MTS16 1-1/4" Wide x 16" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS16 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 16" (Length)...

The Simpson Strong-Tie MTS16Z ZMax® 1-1/4" Wide x 16" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS16 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. ZMax® coating provides corrosion resistance when required. Material: 16 gauge...

The Simpson Strong-Tie MTSM16 offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at the transition points between the two members. The MTSM is load rated for installation on both grout-filled CMU (GFCMU) and concrete. Straps do not need to be wrapped over the truss to achieve the allowable load Can be field bent once to a 45° angle Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 16" (Length)...

The Simpson Strong-Tie HTS16 14ga. x 16" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS16 has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 16" (Length) Fasteners:...

The Simpson Strong-Tie HTSM16 14ga. x 16" Medium Twist Strap Masonry Tie offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at the transition points between the two members. The HTSM is load rated for installation on both grout-filled CMU (GFCMU) and concrete. Straps do not need to be wrapped over the truss to achieve the allowable load Can be field bent once to a 45° angle Material: 14 gauge Finish: Standard G90...

The 1-1/4" wide x 18" long LTS18 Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 18" (Length) Fasteners: 10d or 10d x 1-1/2" depending on load value required and depth of receiving member (See...

The 1-1/4" wide x 18" long LTS18SS Stainless Steel Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. LTS18SS straps should be used where severe corrosive conditions exist. Material: 18 gauge Finish: Stainless Steel Dimensions: 1-1/4" (Wide) x 18" (Length) Fasteners: 10d or...

The Simpson Strong-Tie MTS18 1-1/4" Wide x 18" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS18 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 18" (Length)...

The 1-1/4" wide x 20" long LTS20 Simpson Strong-Tie twist straps are used to provide a tension connection between two wood members. They resist uplift at the heel of a truss economically. LTS twist straps have a 2" bend section that eliminates interference at the transition points between the two members. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 20" (Length) Fasteners: 10d or 10d x 1-1/2" depending on load value required and depth of receiving member (See...

The Simpson Strong-Tie MTS20 1-1/4" Wide x 20" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS20 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 20" (Length)...

The Simpson Strong-Tie MTS20Z ZMax® 1-1/4" Wide x 20" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS20 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. ZMax® coating provides additional corrosion resistance when required....

The Simpson Strong-Tie MTS20SS 1-1/4" Wide x 20" Long Stainless Steel Medium Twist Strap provides a tension connection between two members. This twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS20 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-1/4" (Wide) x 20"...

The Simpson Strong-Tie MTSM20 16ga. x 20" Medium Twist Strap Masonry Tie offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at the transition points between the two members. The MTSM is load rated for installation on both grout-filled CMU (GFCMU) and concrete. Straps do not need to be wrapped over the truss to achieve the allowable load Can be field bent once to a 45° angle Material: 16 gauge Finish: Standard G90...

The Simpson Strong-Tie HTS20 14ga. x 20" Heavy Twist Strap HTS20 provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS20 has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 20" (Length)...

The Simpson Strong-Tie HTS20Z ZMax® 14ga. x 20" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS20Z has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. ZMax® coating provides additional corrosion resistance when required. Material: 14 gauge...

The Simpson Strong-Tie HTSM20 14ga. x 20" Medium Twist Strap Masonry Tie offers moderate-strength truss-to-masonry connections. This twist strap has a small bend section to reduce interference at the transition points between the two members. The HTSM is load rated for installation on both grout-filled CMU (GFCMU) and concrete. Straps do not need to be wrapped over the truss to achieve the allowable load Can be field bent once to a 45° angle Material: 14 gauge Finish: Standard G90...

The Simpson Strong-Tie MTS24C 16ga. x 24" Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS24C has a small bend section at the middle of the strap to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4"...

The Simpson Strong-Tie HTS24 14ga. x 24" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS24 has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 24" (Length) Fasteners:...