Login/Register
Shopping Cart
OR
Simpson Strong-Tie Mission Outdoor Accents® APB44R post bases secure a rough 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other...
Simpson Strong-Tie Mission Outdoor Accents® APB44R post bases secure a rough 4 x 4 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization over a black powder coat for extra corrosion resistance. APB44R bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet stringent building codes...
Simpson Strong-Tie LU24R-18 Rough 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 rough sawn joists to a wood ledger or beam. You can install LU24R-18...
Simpson Strong-Tie LU24R-18 Rough 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 rough sawn joists to a wood ledger or beam. You can install LU24R-18 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2" (Wide) x 3-11/16" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) .162 x 3-1/2" 16d Nails (Header) (2) .148 x 1-1/2"...
The Simpson Strong-Tie PAB4H-12 1/2" x 12" High Strength Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and...
The Simpson Strong-Tie PAB4H-12 1/2" x 12" High Strength Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from high strength steel for higher load values. Please call our sales department direct at 800-323-2999 for pricing and...
Save by Purchasing a Quantity of 500 SSTB16 Bolts! The Simpson Strong-Tie SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall...
Save by Purchasing a Quantity of 500 SSTB16 Bolts! The Simpson Strong-Tie SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 17-5/8" Minimum...
Save by Purchasing a Quantity of 10 Boxes (100 Bases)! Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed...
Save by Purchasing a Quantity of 10 Boxes (100 Bases)! Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only...
Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASA version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish around No...
Save by Purchasing a Quantity of 6 Boxes (72 Pieces)! The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using...
Save by Purchasing a Quantity of 6 Boxes (72 Pieces)! The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x 3-1/2") Strap: 10 Ga. x 2-1/4"...
Save by Purchasing a Quantity of 36 Boxes (360 Pieces)! The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to...
Save by Purchasing a Quantity of 36 Boxes (360 Pieces)! The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Common Nails PB44 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of...
Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8...
Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8 greatly minimizes deflection under load. (20) 3" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill...
Save by Purchasing a Quantity of 12 Boxes (240 Pieces)! Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to...
Save by Purchasing a Quantity of 12 Boxes (240 Pieces)! Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard...
Save by Purchasing a Quantity of 15 Boxes (150 Pieces)! Simpson Strong-Tie PBS44AZ Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the...
Save by Purchasing a Quantity of 15 Boxes (150 Pieces)! Simpson Strong-Tie PBS44AZ Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. ZMax® coating provides additional protection from the weather elements. Finish: ZMax® Base Material: 12 Gauge Base Dimensions: 3-9/16" x 3-1/2" Strap Material: 14 Gauge Strap Height: 6-1/4" Fastener Options: (14) 16d (2) 1/2"...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-6 Information and Installation Instructions. Gray Paint Coating Information...
Save by Purchasing a Pallet of 16 Rolls! Simpson Strong-Tie CMST12 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMST12 are approved for...
Save by Purchasing a Pallet of 16 Rolls! Simpson Strong-Tie CMST12 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMST12 are approved for use with SD Screws as a nail substitution. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3" (Wide) x 40' (Length) Fasteners: 10d or 16d depending on end length and material (See information link below) CMST12 Information and Installation Instructions. Standard G90 Zinc Galvanized...
The Simpson Strong-Tie SSP Single Stud Plate Tie is a prebent strap designed to connect single studs to either top or bottom plates. This versatile single-stud-plate connector helps to create a...
The Simpson Strong-Tie SSP Single Stud Plate Tie is a prebent strap designed to connect single studs to either top or bottom plates. This versatile single-stud-plate connector helps to create a continuous load path in uplift resistance. The SSP features a top flange that allows the plate to attach securely to both sill plates and top plates. Embossments feature provides strength at the bend Can be installed before or after placement of wall Material: 18 Gauge Finish: Standard G90 Zinc Fastener...
Save by Purchasing 48 Box Special! The Simpson Strong-Tie STC Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The STC has a single 1-1/2" slot that will...
Save by Purchasing 48 Box Special! The Simpson Strong-Tie STC Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The STC has a single 1-1/2" slot that will permit the truss chord to move vertically when loads are applied to the roof. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (3) 8d Nails STC Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of...
The Simpson Strong-Tie A21Z ZMax® Framing Clips for various wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Material: 18 Gauge Finish:...
The Simpson Strong-Tie A21Z ZMax® Framing Clips for various wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Material: 18 Gauge Finish: ZMax® G-185 Coating Length: 1-3/8" Flange #1 (W1): 2" Flange #2 (W2): 1-1/2" Fasteners: (4) 10d x 1-1/2" Nails or(4) SD9112 Screws A21Z Information and Installation Instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185...
Save by Purchasing a Pallet of 48 Boxes! The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic...
Save by Purchasing a Pallet of 48 Boxes! The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. Holds the rafter or truss on both sides for high lateral load resistance Can be...
Save by Purchasing a Pallet of 72 Boxes The Simpson Strong-Tie A34 Framing Clips for wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 2-1/2"...
Save by Purchasing a Pallet of 72 Boxes The Simpson Strong-Tie A34 Framing Clips for wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...
The Simpson Strong-Tie RTA12 Rigid Tie® is designed to connect two 1x2 or larger post and joist at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for...
The Simpson Strong-Tie RTA12 Rigid Tie® is designed to connect two 1x2 or larger post and joist at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance. Ideal for gates, fences or any project where a 90® connection is needed Fastens with #8 x 3/4" Screws (not included) Provides a...
The Simpson Strong-Tie LSCSS Stainless Steel adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while...
The Simpson Strong-Tie LSCSS Stainless Steel adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair stringer pitches, the LSCZ connector is suitable for either solid or notched stringers. Replaces additional framing and toe-nailing. May be installed flush with the top of the carrying member (typically suitable for 2x10 or 2x12 header / rim...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. The Simpson Strong-Drive® SD9112SS SD...
The Simpson Strong-Tie Strong-Drive® SD and SDS structural-connector screws are the only screws approved for use with Simpson Strong-Tie connectors. The Simpson Strong-Drive® SD9112SS SD Stainless-Steel Connector Screw is specifically designed to replace nails in certain Simpson Strong-Tie® stainless-steel connectors. The load-rated SD9112SS screw has been tested and approved for use in many popular Simpson Strong-Tie products. In certain applications screws are easier and more...
The Simpson Strong-Tie Outdoor Accents APRTA2 Decorative Rigid Tie®Angle is designed to connect two 2x wood members at a 90° angle. This Rigid Tie angle fastens the members on two sides,...
The Simpson Strong-Tie Outdoor Accents APRTA2 Decorative Rigid Tie®Angle is designed to connect two 2x wood members at a 90° angle. This Rigid Tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX® galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents Accessories line, this decorative hardware...
The Simpson Strong-Tie FRFP Flat Retrofit Foundation Plate is designed to connect the mudsill to the foundation and provide lateral load resistance. This flat retrofit foundation plate features a...
The Simpson Strong-Tie FRFP Flat Retrofit Foundation Plate is designed to connect the mudsill to the foundation and provide lateral load resistance. This flat retrofit foundation plate features a design that allows the designer to maintain prescriptive requirements. The FRFP can be used by filling the three round holes, or as an alternative, filling two optional triangle holes to allow designers increased loads and greater spacing. Made from durable galvanized steel for lasting and reliable...
The Simpson Strong-Tie LSSR26Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 6 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...
The Simpson Strong-Tie LSSR26Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 6 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 2-1/2" (Flange Width) x 5-3/8" (Height) x 1-9/16" (Joist Width) Fastener Options:...