Simpson Strong-Tie

Simpson Strong Tie HUS210 2 x 10 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...

Simpson Strong Tie HUS210 2 x 10 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-5/8" (Wide) x 9" (Height) x 3" (Seat Depth) Fastener Options: (30) 16d Nails or SD10212 Screws(Header) (10) 16d Nails (Joist)...Shorter...

Simpson Strong Tie U210 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....

Simpson Strong Tie U210 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-13/16" (Height) x 2" (Seat Depth) Fastener Options: (10) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 1-1/2" 10d Nails (Joist) U210 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

Simpson Strong-Tie ST6224 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of...

Simpson Strong-Tie ST6224 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 23-5/16" (Length) Fastener Options: (28) 16d Nails (28) SD10 x 1-1/2" Screws ST6224 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

Simpson Strong-Tie MSTA21 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x...

Simpson Strong-Tie MSTA21 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 21" (Length) Fasteners: (16) 10d Nails (16) SD9 x 1-1/2" Screws...

The Simpson CBSQ66-SDS2HDG Hot Dipped Galvanized (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1"...

The Simpson CBSQ66-SDS2HDG Hot Dipped Galvanized (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2")...

The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the...

The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc Width: 2-1/2" Length: 12-3/8" Anchor Bolt: 5/8" Fastener...

The Simpson Strong-Tie SUL26-2 Skewed Left Double 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally...

The Simpson Strong-Tie SUL26-2 Skewed Left Double 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 4-15/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (8) .162 x 3-1/2" 16d Nails (Face) (4)...

The Simpson Strong-Tie® Strong-Drive® SDWS221000DB .220" x 10" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects...

The Simpson Strong-Tie® Strong-Drive® SDWS221000DB .220" x 10" wood screw is specifically designed for structural wood-to-wood applications and is also ideal for a wide variety of projects where a high-strength attachment is needed. The 0.220" diameter of the SDWS221000DB 10" wood screw requires less torque to install than comparable fasteners, making it easier to drive. The Double-Barrier Coating corrosion-resistant coating makes it suitable for many interior and exterior...

Simpson Strong-Tie EPB66HDG allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus...

Simpson Strong-Tie EPB66HDG allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance for additional...

The Simpson PB66Z ZMax® Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coating...

The Simpson PB66Z ZMax® Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coating Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66Z information and installation instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating)...

Simpson Strong Tie face mount HU14 Composite Lumber Hanger is designed for hanging 1-3/4" x 14" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value....

Simpson Strong Tie face mount HU14 Composite Lumber Hanger is designed for hanging 1-3/4" x 14" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 13-11/16" (Height) x 2-1/2" (Seat Depth) Fastener Options: (28) 16d Nails (Header-Min) (8) 10d Nails (Joist-Min) (36) 16d Nails (Header-Max) (14) 10d Nails (Joist-Max) HU14 Information and Installation Instructions....

The Simpson Strong-Tie 2-5/16" x 14" MIT3514 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...

The Simpson Strong-Tie 2-5/16" x 14" MIT3514 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...

Simpson Strong-Tie HDU5-SDS2.5HDG Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson...

Simpson Strong-Tie HDU5-SDS2.5HDG Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in either exterior or in...

Simpson Strong Drive® SSNA8 1-1/2" x .131" Type 316 Stainless Steel nails are mostly used in stainless steel angle clips and straps to reach the load values that are required as well as...

Simpson Strong Drive® SSNA8 1-1/2" x .131" Type 316 Stainless Steel nails are mostly used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 150 nails in the 1 lb. pack. The nails are type 316 stainless steel providing high/severe corrosion protection. SSNA8 Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel chromium austenitic...

Simpson Strong Drive® SSNA8D5 1-1/2" x .131" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required...

Simpson Strong Drive® SSNA8D5 1-1/2" x .131" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 750 nails per 5 lb. pack. The nails are stainless steel providing high/severe corrosion protection. SSNA8D5 Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel chromium...

The Simpson Strong-Tie ABU88HDG Hot Dipped Galvanized is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88HDG features 1"...

The Simpson Strong-Tie ABU88HDG Hot Dipped Galvanized is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88HDG features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. The Hot Dipped Galvanized feature provides an extra layer of protection from...

The S/HDU11 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU11 holdown...

The S/HDU11 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU11 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 7/8" Fasteners (Not Included): (27) #14...

Head is Painted Sienna! The Simpson S10A325KJS 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted sienna to match siding or decking...

Head is Painted Sienna! The Simpson S10A325KJS 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted sienna to match siding or decking when applicable. The countersunk casing head with a checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank...

Simpson Strong-Tie ST6236 14-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of...

Simpson Strong-Tie ST6236 14-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 33-13/16" (Length) Fastener Options: (40) 16d Nails (40) SD10 x 1-1/2" Screws ST6236 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

Simpson Strong Tie HU28 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...

Simpson Strong Tie HU28 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5-1/4" (Height) x 2-1/4" (Seat Depth) Fasteners: (6) .162 x 3-1/2" (16d) Nails (Header) (4) .148 x 1-1/2" (10d) Nails (Joist) HU28 Information and Installation...

Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP...

Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2"...

Simpson Strong-Tie IUS2.06/14 is used to install 2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs....

Simpson Strong-Tie IUS2.06/14 is used to install 2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...

Simpson Strong-Tie CCO7 End Column Caps with no post straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The CCO7 Column Caps comes with no coating to allow you...

Simpson Strong-Tie CCO7 End Column Caps with no post straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The CCO7 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 6-7/8" (Beam) x 13"...

Simpson Strong-Tie ECC5 1/4-8 End Column Caps provide a high capacity connection between a 5-1/8" Glulam beam and a 8x post. ECC5 1/4-8 End Column Caps should be used when the 5-1/8" beam ends at...

Simpson Strong-Tie ECC5 1/4-8 End Column Caps provide a high capacity connection between a 5-1/8" Glulam beam and a 8x post. ECC5 1/4-8 End Column Caps should be used when the 5-1/8" beam ends at the 6x post. Please Note: This column cap is also available in powder coat or Hot Dipped Galvanized as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/4" (Beam) x 7-1/2" (Post) x 9-1/2" (Length)...