Login      View Cart   Checkout   Wish List
Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Simpson Strong-Tie CB44 Column Base
Availability: Stock
Simpson Strong-Tie Item #: CB44 -

    Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

    Simpson Strong-Tie CBSQ44 Column Base
    Availability: Stock
    Simpson Strong-Tie Item #: CBSQ44 -

      The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x 3-1/2") Strap: 10 Ga. x 2-1/4" Wide x 8-3/8" High CBSQ44 Information and Installation...

      Simpson Strong-Tie EPB44 Elevated Post Base
      Availability: Ships Direct
      Simpson Strong-Tie Item #: EPB44 -

        Simpson Strong-Tie EPB44 allow you to elevated a 4 x 4 (3-1/2" x 3-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and un-braced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...

        Simpson PB44 Post Bases
        Availability: Stock
        Simpson Strong-Tie Item #: PB44 -

          The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails Additional information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....

          Simpson Strong-Tie PBS44 Standoff Post Base
          Availability: Stock
          Simpson Strong-Tie Item #: PBS44A -

            Simpson Strong-Tie PBS44A Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Finish: Standard G90 Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz....

            Simpson Strong-Tie CB44HDG Column Base
            Availability: Ships Direct
            Simpson Strong-Tie Item #: CB44HDG -

              Simpson Strong-Tie CB44HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...

              Simpson Strong-Tie CBSQ44HDG Column Base
              Availability: Stock
              Simpson Strong-Tie Item #: CBSQ44HDG -

                The Simpson CBSQ44-SDS2HDG Hot Dipped Galvanized (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x...

                Simpson Strong-Tie EPB44HDG Elevated Post Base
                Availability: Ships Direct
                Simpson Strong-Tie Item #: EPB44HDG -

                  Simpson Strong-Tie EPB44HDG Hot Dipped Galvanized allow you to elevated a 4 x 4 (3-1/2" x 3-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance...

                  Simpson PB44Z Post Bases
                  Availability: Stock
                  Simpson Strong-Tie Item #: PB44Z -

                    The Simpson PB44Z ZMax® Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coated for extra corrosion resistance Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails Additional information and installation instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than...

                    Simpson Strong-Tie PBS44 Standoff Post Base
                    Availability: Stock
                    Simpson Strong-Tie Item #: PBS44AZ -

                      Simpson Strong-Tie PBS44AZ Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. ZMax® coating provides additional protection from the weather elements. Finish: ZMax® Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions ZMax® Galvanized Coating Information...

                      Simpson Strong-Tie CB46 Column Base
                      Availability: Stock
                      Simpson Strong-Tie Item #: CB46 -

                        Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

                        Simpson Strong-Tie CBSQ46 Column Base
                        Availability: Stock
                        Simpson Strong-Tie Item #: CBSQ46 -

                          The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3" Wide x 8-11/16" High CBSQ46 Information and Installation...

                          Simpson Strong-Tie PBS44 Standoff Post Base
                          Availability: Stock
                          Simpson Strong-Tie Item #: PBS44A-HDG -

                            Simpson Strong-Tie PBS44AHDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Hot Dipped Galvanized (HDG) coating provides additional protection from the elements. Finish: Hot Dipped Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation...

                            Simpson Strong-Tie CB46HDG Column Base
                            Availability: Ships Direct
                            Simpson Strong-Tie Item #: CB46HDG -

                              Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...

                              Simpson Strong-Tie CBSQ46HDG Column Base
                              Availability: Ships Direct
                              Simpson Strong-Tie Item #: CBSQ46HDG -

                                The Simpson CBSQ46-SDS2HDG (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3"...

                                Simpson PB46 Post Bases
                                Availability: Stock
                                Simpson Strong-Tie Item #: PB46 -

                                  The Simpson PB46 Post Base for 4 x 6 (3-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails Additional information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....

                                  Simpson Strong-Tie PBS46 Standoff Post Base
                                  Availability: Stock
                                  Simpson Strong-Tie Item #: PBS46 -

                                    Simpson Strong-Tie PBS46 Standoff Post Bases are used to connect a 4 x 6 (3-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Available only in standard galvanizing. Finish: Standard G90 Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...

                                    Simpson Strong-Tie CB66 Column Base
                                    Availability: Stock
                                    Simpson Strong-Tie Item #: CB66 -

                                      Simpson Strong-Tie CB66 column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

                                      Simpson Strong-Tie CBSQ66 Column Base
                                      Availability: Stock
                                      Simpson Strong-Tie Item #: CBSQ66 -

                                        The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2") Strap: 10 Ga. x 3" Wide x 8-3/4" High CBSQ66 Information and Installation...

                                        Simpson Strong-Tie EPB46 Elevated Post Base
                                        Availability: Ships Direct
                                        Simpson Strong-Tie Item #: EPB46 -

                                          Simpson Strong-Tie EPB46 allow you to elevated a 4 x 6 (3-1/2" x 5-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...

                                          Simpson PB66 Post Bases
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: PB66 -

                                            The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts Additional information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot...

                                            Simpson Strong-Tie PBS66 Standoff Post Base
                                            Availability: Stock
                                            Simpson Strong-Tie Item #: PBS66 -

                                              Simpson Strong-Tie PBS66 Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Finish: Standard G90 Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of...

                                              Simpson Strong-Tie CB66HDG Column Base
                                              Availability: Stock
                                              Simpson Strong-Tie Item #: CB66HDG -

                                                Simpson Strong-Tie CB66HDG Hot Dipped Galvanized column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66HDG base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...

                                                Simpson Strong-Tie CBSQ66HDG Column Base
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: CBSQ66HDG -

                                                  The Simpson CBSQ66-SDS2HDG Hot Dipped Galvanized (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2")...

                                                  Simpson Strong-Tie EPB46HDG Elevated Post Base
                                                  Availability: Ships Direct
                                                  Simpson Strong-Tie Item #: EPB46HDG -

                                                    Simpson Strong-Tie EPB46HDG Hot Dipped Galvanized allow you to elevated a 4 x 6 (3-1/2" x 5-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance...

                                                    Simpson PB66Z Post Bases
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: PB66Z -

                                                      The Simpson PB66Z ZMax® Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coating Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts Additional information and installation instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185...

                                                      Simpson Strong-Tie PBS66 Standoff Post Base
                                                      Availability: Stock
                                                      Simpson Strong-Tie Item #: PBS66-HDG -

                                                        Simpson Strong-Tie PBS66HDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab or pier. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Hot dipped galvanizing provides and additional layer of protection from deterioration due to weather. Finish: Hot Dipped Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and...

                                                        Simpson Strong-Tie CB68 Column Base
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: CB68 -

                                                          Simpson Strong-Tie CB68 column bases are used to provide a connection of a 6 x 8 (5-1/2" x 7-1/2") post to concrete. The CB68 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 7-1/2") Fasteners: (2) 5/8" Machine Bolts CB68 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

                                                          Simpson Strong-Tie CBSQ88 Column Base
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: CBSQ88 -

                                                            The Simpson CBSQ88-SDS2 (for 7-1/2" x 7-1/2" post) column bases include (12) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 8 x 8 Nominal (7-1/2" x 7-1/2") Base: 12 Ga. (7-1/2" x 7-3/8") Strap: 7 Ga. x 3" Wide x 8-11/16" High CBSQ88 Information and Installation...

                                                            Simpson Strong-Tie EPB66 Elevated Post Base
                                                            Availability: Ships Direct
                                                            Simpson Strong-Tie Item #: EPB66 -

                                                              Simpson Strong-Tie EPB66 allow you to elevated a 6 x 6 (5-1/2" x 5-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...

                                                              Simpson Strong-Tie CB610 Column Base
                                                              Availability: Ships Direct
                                                              Simpson Strong-Tie Item #: CB610 -

                                                                Simpson Strong-Tie CB610 column bases are used to provide a connection of a 6 x 10 (5-1/2" x 9-1/2") post to concrete. The CB610 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 9-1/2") Fasteners: (2) 5/8" Machine Bolts CB610 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of...

                                                                Simpson Strong-Tie CBSQ88HDG Column Base
                                                                Availability: Ships Direct
                                                                Simpson Strong-Tie Item #: CBSQ88HDG -

                                                                  The Simpson CBSQ88-SDS2HDG Hot Dipped Galvanized (for 7-1/2" x 7-1/2" post) column bases include (12) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanizing provides added corrosion protection Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 8 x 8 Nominal (7-1/2" x 7-1/2") Base: 12 Ga. (7-1/2" x 7-3/8")...

                                                                  Simpson Strong-Tie EPB66 Elevated Post Base
                                                                  Availability: Ships Direct
                                                                  Simpson Strong-Tie Item #: EPB66HDG -

                                                                    Simpson Strong-Tie EPB66HDG Hot Dipped Galvanized allow you to elevated a 6 x 6 (5-1/2" x 5-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance...

                                                                    Simpson Strong-Tie CB7 1/8-7 Column Base
                                                                    Availability: Stock
                                                                    Simpson Strong-Tie Item #: CB77 -

                                                                      Simpson Strong-Tie CB7 1/8-7 column bases are used to provide a connection of a 7-1/8" x 7" glulam post to concrete. The CB7 1/8-7 base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Simpson Gray Painted Steel Base Material: 3 Ga Simpson Gray Painted Steel (7-1/8" x 7") Fasteners: (2) 3/4" Machine Bolts CB7 1/8-7 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only...

                                                                      Simpson Strong-Tie CB86 Column Base
                                                                      Availability: Stock
                                                                      Simpson Strong-Tie Item #: CB86 -

                                                                        Simpson Strong-Tie CB86 column bases are used to provide a connection of a 8 x 6 (7-1/2" x 5-1/2") post to concrete. The CB86 base is installed during the pouring of the concrete. Bolts run through the 8x side. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (7-1/2" x 5-1/2") Fasteners: (2) 3/4" Machine Bolts CB86 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

                                                                        Simpson Strong-Tie CB88 Column Base
                                                                        Availability: Stock
                                                                        Simpson Strong-Tie Item #: CB88 -

                                                                          Simpson Strong-Tie CB88 column bases are used to provide a connection of a 8 x 8 (7-1/2" x 7-1/2") post to concrete. The CB88 base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (7-1/2" x 7-1/2") Fasteners: (2) 3/4" Machine Bolts CB88 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect the...

                                                                          Simpson Strong-Tie CB88HDG Column Base
                                                                          Availability: Ships Direct
                                                                          Simpson Strong-Tie Item #: CB88HDG -

                                                                            Simpson Strong-Tie CB88HDG Hot Dipped Galvanized column bases are used to provide a connection of a 8 x 8 (7-1/2" x 7-1/2") post to concrete. The CB88HDG base is installed during the pouring of the concrete. Coated hot dipped galvanized for additional corrosion resistance. Strap Material: 3 Ga. x 3" Wide Hot Dipped Galvanized Steel Base Material: 3 Ga Hot Dipped Galvanized (7-1/2" x 7-1/2") Fasteners: (2) 3/4" Machine Bolts CB88HDG Information and Installation Instructions Hot Dipped...

                                                                            Simpson Strong-Tie CB1010 Column Base
                                                                            Availability: Stock
                                                                            Simpson Strong-Tie Item #: CB1010 -

                                                                              Simpson Strong-Tie CB1010 column bases are used to provide a connection of a 10 x 10 (9-1/2" x 9-1/2") post to concrete. The CB1010 base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (9-1/2" x 9-1/2") Fasteners: (2) 3/4" Machine Bolts CB1010 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect...

                                                                              Simpson Strong-Tie CB1212 Column Base
                                                                              Availability: Stock
                                                                              Simpson Strong-Tie Item #: CB1212 -

                                                                                Simpson Strong-Tie CB1212 column bases are used to provide a connection of a 12 x 12 (11-1/2" x 11-1/2") post to concrete. The CB1212 base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (11-1/2" x 11-1/2") Fasteners: (2) 3/4" Machine Bolts CB1212 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only...