Login      View Cart   Checkout   Wish List
Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Simpson Strong Tie GH Girder Hangers
Availability: Ships Direct
Simpson Strong-Tie Item #: GH46-6 -

    The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-6 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

    Simpson Strong Tie HGUS26 Heavy Duty Joist Hangers
    Availability: Stock
    Simpson Strong-Tie Item #: HGUS26 -

      Simpson Strong Tie HGUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-5/8" (Wide) x 5-3/8" (Height) x 5" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS26 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...

      Simpson Strong-Tie HTU26 Face Mount Truss Hangers
      Availability: Ships Direct
      Simpson Strong-Tie Item #: HTU26 -

        Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various trusses. Additionally you can have the HTU26 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...

        Simpson Strong Tie HU1.81/5 Structural Compsite Lumber Hangers
        Availability: Ships Direct
        Simpson Strong-Tie Item #: HU1.81/5 -

          Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener Options: (12) 16d Nails (Header-Min) (4) 10d Nails (Joist-Min) (16) 16d Nails (Header-Max) (6) 10d Nails (Joist-Max) HU1.81/5 Information and Installation...

          Simpson Strong Tie HU26 Heavy Joist Hangers
          Availability: Stock
          Simpson Strong-Tie Item #: HU26 -

            Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-9/16" (Wide) x 3-1/16" (Height) x 2-1/4" (Seat Depth) Fasteners: (4) 16d Nails (2) 10d x 1-1/2" Nails (Joist) HU26 Information and Installation Instructions. Standard G90...

            Simpson Strong Tie HUCQ1.81/9 Heavy Duty I-Joist Hangers
            Availability: Stock
            Simpson Strong-Tie Item #: HUCQ1.81/9-SDS -

              Simpson Strong Tie HUCQ1.81/9-SDS 1-3/4" Wide x 9" Heavy Duty Composite Lumber Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (8) SDS 1/4" x 1-3/4" Screws (Header) (4) SDS 1/4" x 1-3/4" Screws (Joist)...

              Simpson Strong Tie HUS26 Heavy Joist Hangers
              Availability: Stock
              Simpson Strong-Tie Item #: HUS26 -

                Simpson Strong Tie HUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS26 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-5/8" (Wide) x 5-3/8" (Height) x 3" (Seat Depth)...

                Simpson LSSJ26LZ Left Skew Adjustable Jack Hanger
                Availability: Ships Direct
                Simpson Strong-Tie Item #: LSSJ26LZ -

                  The Simpson Strong-Tie LSSJ26LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

                  Simpson Strong-Tie LSU2x Adjustable Light Slopeable/Skewable U Hangers
                  Availability: Stock
                  Simpson Strong-Tie Item #: LSU26 -

                    Simpson Strong-Tie LSU26 is a both a field slopeable and skewable hanger used to attached 2 x 6 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSU26 hangers have a closed back they must be installed on the header or the end of the joist first. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-7/8" (Height) x 1-1/2" (Flange) Fastener Options : (6) 10d Nails (Face) (5) 10d x...

                    Simpson Strong Tie LU24 Standard Joist Hangers
                    Availability: Stock
                    Simpson Strong-Tie Item #: LU24EA -

                      Simpson Strong-Tie LU24 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 joists to a wood ledger or beam. You can install LU24 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 10d Nails (Header-Min) (4) 16d Nails (Header-Max) (2) 10d x 1-1/2" Nails...

                      Simpson Strong Tie LUS24 Double Shear Joist Hangers
                      Availability: Stock
                      Simpson Strong-Tie Item #: LUS24EA -

                        Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-3/4" (Seat Depth) Fastener...

                        Simpson Strong Tie MIT9.5 Top Flange I-Joist Hangers
                        Availability: Ships Direct
                        Simpson Strong-Tie Item #: MIT9.5 -

                          The Simpson Strong-Tie 1-3/4" x 9-1/2" MIT9.5 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...

                          Simpson Strong Tie SUL24 Skewed 45 Degree Joist Hangers
                          Availability: Ships Direct
                          Simpson Strong-Tie Item #: SUL24 -

                            The Simpson Strong-Tie SUL24 Skewed Left 2 x 4 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) 16d Nails (Face) (4) 10d x 1-1/2" Nails (Joist)...

                            Simpson Strong Tie U24 Standard Joist Hangers
                            Availability: Stock
                            Simpson Strong-Tie Item #: U24EA -

                              Simpson Strong Tie U24 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 10d Nails (Header - Min) (4) 16d Nails (Header - Max) (2) 10d x 1-1/2" Nails (Joist) U24 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

                              Simpson Strong Tie GH Girder Hangers
                              Availability: Ships Direct
                              Simpson Strong-Tie Item #: GH46-6BX -

                                The Simpson Strong Tie GH46-6 Girder Hangers is used to connect a 4 x 6 girder to a 6" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-6 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

                                Simpson Strong Tie HGUS26-2Heavy Duty Joist Hangers
                                Availability: Stock
                                Simpson Strong-Tie Item #: HGUS26-2 -

                                  Simpson Strong Tie HGUS26-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are designed to accept two 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/16" (Wide) x 5-7/16" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed...

                                  Simpson Strong-Tie HTU28-2 Face Mount Truss Hangers
                                  Availability: Ships Direct
                                  Simpson Strong-Tie Item #: HTU26-2 -

                                    Simpson Strong-Tie HTU26-2 Double 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26-2 hanger very versatile for various trusses. Additionally you can have the HTU26-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...

                                    Simpson Strong Tie HU1.81/5 Structural Compsite Lumber Hangers
                                    Availability: Ships Direct
                                    Simpson Strong-Tie Item #: HU1.81/5BX -

                                      Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener Options: (12) 16d Nails (Header-Min) (4) 10d Nails (Joist-Min) (16) 16d Nails (Header-Max) (6) 10d Nails (Joist-Max) HU1.81/5 Information and Installation...

                                      Simpson Strong Tie HU28 Heavy Joist Hangers
                                      Availability: Stock
                                      Simpson Strong-Tie Item #: HU28 -

                                        Simpson Strong Tie HU28 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5-1/4" (Height) x 2-1/4" (Seat Depth) Fasteners: (6) 16d Nails (4) 10d x 1-1/2" Nails (Joist) HU28 Information and Installation Instructions. Standard G90 Zinc...

                                        Simpson Strong Tie HUCQ1.81/11 Heavy Duty I-Joist Hangers
                                        Availability: Stock
                                        Simpson Strong-Tie Item #: HUCQ1.81/11-SDS -

                                          Simpson Strong Tie HUCQ1.81/11-SDS 1-3/4" Wide x 11" Heavy Duty Composite Lumber Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/4" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (10) SDS 1/4" x 1-3/4" Screws (Header) (4) SDS 1/4" x 1-3/4" Screws (Joist)...

                                          Simpson Strong Tie HUS26 Heavy Joist Hangers
                                          Availability: Ships Direct
                                          Simpson Strong-Tie Item #: HUS26Z -

                                            Simpson Strong Tie HUS26Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS26 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-5/8" (Wide) x 5-3/8" (Height) x 3"...

                                            Simpson LSSJ26RZ Left Skew Adjustable Jack Hanger
                                            Availability: Ships Direct
                                            Simpson Strong-Tie Item #: LSSJ26RZ -

                                              The Simpson Strong-Tie LSSJ26RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

                                              Simpson Strong-Tie LSU2x Adjustable Light Slopeable/Skewable U Hangers
                                              Availability: Ships Direct
                                              Simpson Strong-Tie Item #: LSU26Z -

                                                Simpson Strong-Tie LSU26Z with ZMax Coating is a both a field slopeable and skewable hanger used to attached 2 x 6 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSU26Z hangers have a closed back they must be installed on the header or the end of the joist first. ZMax coating provides an extra level of corrosion resistance when conditions demand it. Material: 18 gauge Finish: ZMax® G-185 Coating-...

                                                Simpson Strong Tie LU24 2 x 4 Joist Hangers
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: LU24BX -

                                                  Simpson Strong-Tie LU24 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 joists to a wood ledger or beam. You can install LU24 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Save when purchasing LU24 joist hangers by the box of 100. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 10d Nails...

                                                  Simpson Strong Tie LUS24 Double Shear Joist Hangers
                                                  Availability: Stock
                                                  Simpson Strong-Tie Item #: LUS24BX -

                                                    Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24 hangers are also approved for installation with SD9 Structural Screws. Save when purchased by the box of 100 hangers Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x...

                                                    Simpson Strong Tie MIT11.88 Top Flange I-Joist Hangers
                                                    Availability: Ships Direct
                                                    Simpson Strong-Tie Item #: MIT11.88 -

                                                      The Simpson Strong-Tie 1-3/4" x 11-7/8" MIT11.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...

                                                      Simpson Strong Tie SUR24 Skewed 45 Degree Joist Hangers
                                                      Availability: Ships Direct
                                                      Simpson Strong-Tie Item #: SUR24 -

                                                        The Simpson Strong-Tie SUR24 Skewed Right 2 x 4 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) 16d Nails (Face) (4) 10d x 1-1/2" Nails (Joist)...

                                                        Simpson Strong Tie U26 Standard Joist Hangers
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: U26EA -

                                                          Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 2" (Seat Depth) Fastener Options: (6) 10d Nails (Header - Min) (6) 16d Nails (Header - Max) (4) 10d x 1-1/2" Nails (Joist) U26 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

                                                          Simpson Strong Tie GH Girder Hangers
                                                          Availability: Ships Direct
                                                          Simpson Strong-Tie Item #: GH46-8 -

                                                            The Simpson Strong Tie GH46-8 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

                                                            Simpson Strong Tie HGUS26-3 Heavy Duty Joist Hangers
                                                            Availability: Ships Direct
                                                            Simpson Strong-Tie Item #: HGUS26-3 -

                                                              Simpson Strong Tie HGUS26-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-3 hangers are designed to accept three 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 4-15/16" (Wide) x 5-1/2" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed...

                                                              Simpson Strong-Tie HTU28 Face Mount Truss Hangers
                                                              Availability: Ships Direct
                                                              Simpson Strong-Tie Item #: HTU28 -

                                                                Simpson Strong-Tie HTU28 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28 hanger very versatile for various trusses. Additionally you can have the HTU28 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...

                                                                Simpson Strong Tie HU210 Heavy Joist Hangers
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: HU210 -

                                                                  Simpson Strong Tie HU210 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 2-1/4" (Seat Depth) Fasteners: (8) 16d Nails (4) 10d x 1-1/2" Nails (Joist) HU210 Information and Installation Instructions. Standard G90...

                                                                  Simpson Strong Tie HUCQ210-2 Heavy Duty Joist Hangers
                                                                  Availability: Stock
                                                                  Simpson Strong-Tie Item #: HUCQ210-2 -

                                                                    Simpson Strong Tie HUCQ210-2-SDS 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws (Joist)...

                                                                    Simpson LSSJ28LZ Left Skew Adjustable Jack Hanger
                                                                    Availability: Ships Direct
                                                                    Simpson Strong-Tie Item #: LSSJ28LZ -

                                                                      The Simpson Strong-Tie LSSJ28LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ28LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

                                                                      Simpson Strong-Tie LSSU2x Adjustable Light Slopeable/Skewable U Hangers
                                                                      Availability: Stock
                                                                      Simpson Strong-Tie Item #: LSSU28 -

                                                                        Simpson Strong-Tie LSSU28 is a both a field slopeable and skewable hanger used to attached 2 x 8 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSSU28 hangers have a closed back they must be installed on the header or the end of the joist first. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 1-5/8" (Flange) Fastener Options : (10) 10d Nails (Face) (5) 10d x...

                                                                        Simpson Strong Tie LU24 Standard Joist Hangers
                                                                        Availability: Ships Direct
                                                                        Simpson Strong-Tie Item #: LU24R-18 -

                                                                          Simpson Strong-Tie LU24R-18 Rough 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 rough sawn joists to a wood ledger or beam. You can install LU24R-18 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2" (Wide) x 3-11/16" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 16d Nails (2) 10d x 1-1/2" Nails (Joist) Strong...

                                                                          Simpson Strong Tie LUS24Z Double Shear Joist Hangers
                                                                          Availability: Stock
                                                                          Simpson Strong-Tie Item #: LUS24ZEA -

                                                                            Simpson Strong Tie LUS24Z ZMax® 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24Z hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-3/4" (Seat...

                                                                            Simpson Strong Tie MIT1.81/14 Top Flange I-Joist Hangers
                                                                            Availability: Ships Direct
                                                                            Simpson Strong-Tie Item #: MIT1.81/14 -

                                                                              The Simpson Strong-Tie 1-3/4" x 14" MIT1.81/14 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...

                                                                              Simpson Strong Tie SUL26 Skewed 45 Degree Joist Hangers
                                                                              Availability: Stock
                                                                              Simpson Strong-Tie Item #: SUL26 -

                                                                                The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (6) 16d Nails (Face) (6) 10d x 1-1/2" Nails (Joist)...

                                                                                Simpson Strong Tie U26-2 Standard Joist Hangers
                                                                                Availability: Stock
                                                                                Simpson Strong-Tie Item #: U26-2EA -

                                                                                  Simpson Strong Tie U26-2 Double 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (8) 10d Nails (Header - Min) (8) 16d Nails (Header - Max) (4) 10d x 1-1/2" Nails (Joist) U26-2 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

                                                                                  Simpson Strong Tie GH Girder Hangers
                                                                                  Availability: Ships Direct
                                                                                  Simpson Strong-Tie Item #: GH46-8BX -

                                                                                    The Simpson Strong Tie GH46-8 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

                                                                                    Simpson Strong Tie HGUS28 Heavy Duty Joist Hangers
                                                                                    Availability: Stock
                                                                                    Simpson Strong-Tie Item #: HGUS28 -

                                                                                      Simpson Strong Tie HGUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-5/8" (Wide) x 7-1/8" (Height) x 5" (Seat Depth) Fastener Options: (36) 16d Nails (Header) (12) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS28 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...

                                                                                      Simpson Strong-Tie HTU28-2 Face Mount Truss Hangers
                                                                                      Availability: Ships Direct
                                                                                      Simpson Strong-Tie Item #: HTU28-2 -

                                                                                        Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for various trusses. Additionally you can have the HTU28-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...

                                                                                        Simpson Strong Tie HU212 Heavy Joist Hangers
                                                                                        Availability: Stock
                                                                                        Simpson Strong-Tie Item #: HU212 -

                                                                                          Simpson Strong Tie HU212 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 9" (Height) x 2-1/4" (Seat Depth) Fasteners: (10) 16d Nails (6) 10d x 1-1/2" Nails (Joist) HU212 Information and Installation Instructions. Standard G90 Zinc...

                                                                                          Simpson Strong Tie HUCQ210-2 Heavy Duty Joist Hangers
                                                                                          Availability: Ships Direct
                                                                                          Simpson Strong-Tie Item #: HUCQ210-2Z -

                                                                                            Simpson Strong Tie HUCQ210-2Z-SDS ZMax® 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws...

                                                                                            Simpson Strong Tie HUS26-2 Heavy Joist Hangers
                                                                                            Availability: Ships Direct
                                                                                            Simpson Strong-Tie Item #: HUS26-2 -

                                                                                              Simpson Strong Tie HUS26-2 Double 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5-3/16" (Height) x 2" (Seat Depth) Fastener Options: (4) 16d Nails or SD10212 Screws(Header) (6) 16d Nails...

                                                                                              Simpson LSSJ28RZ Left Skew Adjustable Jack Hanger
                                                                                              Availability: Ships Direct
                                                                                              Simpson Strong-Tie Item #: LSSJ28RZ -

                                                                                                The Simpson Strong-Tie LSSJ28RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ28RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

                                                                                                Simpson Strong-Tie LSSU2x Adjustable Light Slopeable/Skewable U Hangers
                                                                                                Availability: Ships Direct
                                                                                                Simpson Strong-Tie Item #: LSSU28Z -

                                                                                                  Simpson Strong-Tie LSSU28Z ZMax® is a both a field slopeable and skewable hanger used to attached 2 x 8 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSSU28Z ZMax® hangers have a closed back they must be installed on the header or the end of the joist first. Material: 18 gauge Finish: Z ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 1-5/8" (Flange) Fastener Options : (10)...