Products 1-48 of 210
Show
Simpson Strong Tie HGUS26 Heavy Duty Joist Hangers
Price: $12.75
More Information
Availability: Stock
Simpson Strong-Tie Item #: HGUS26 -

    Simpson Strong Tie HGUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-5/8" (Wide) x 5-3/8" (Height) x 5" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS26 Information and Installation Instructions. Please Note: If there are any...

    Simpson Strong-Tie HTU26 Face Mount Truss Hangers
    Price: $2.56
    More Information
    Availability: Stock
    Simpson Strong-Tie Item #: HTU26 -

      Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various trusses. Additionally you can have the HTU26 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...

      Simpson Strong Tie HU26 Heavy Joist Hangers
      Price: $3.49
      More Information
      Availability: Stock
      Simpson Strong-Tie Item #: HU26 -

        Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 3-1/16" (Height) x 2-1/4" (Seat Depth) Fastener Options: (4) 16d Nails (2) 10d x 1-1/2" Nails (Joist) HU26 Information and...

        Simpson Strong Tie HUCQ210-2 Heavy Duty Joist Hangers
        Price: $16.95
        More Information
        Availability: Stock
        Simpson Strong-Tie Item #: HUCQ210-2 -

          Simpson Strong Tie HUCQ210-2-SDS 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS...

          Simpson Strong Tie HUS26 Heavy Joist Hangers
          Price: $1.87
          More Information
          Availability: Stock
          Simpson Strong-Tie Item #: HUS26 -

            Simpson Strong Tie HUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS26 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-5/8" (Wide) x...

            Simpson Strong Tie ITS Top Flange I-Joist Hangers
            Price: $1.95
            More Information
            Availability: Stock
            Simpson Strong-Tie Item #: ITS1.81/9.5 -

              Simpson Strong-Tie ITS1.81/9.5 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/9.5 installs 1-3/4" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...

              Simpson Strong Tie IUS1.81/9.5 Face Mount I-Joist Hangers
              Price: $1.77
              More Information
              Availability: Stock
              Simpson Strong-Tie Item #: IUS1.81/9.5 -

                Simpson Strong-Tie IUS1.81/9.5 is used to install 1-3/4" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-7/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) 10d Nails (Face) IUS1.81/9.5 Information and Installation Instructions. Please Note: If there...

                Simpson Strong-Tie LSU26 Adjustable Light Slopeable/Skewable U Hangers
                Price: $4.28
                More Information
                Availability: Stock
                Simpson Strong-Tie Item #: LSU26 -

                  Simpson Strong-Tie LSU26 is a both a field slopeable and skewable hanger used to attached 2 x 6 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSU26 hangers have a closed back they must be installed on the header or the end of the joist first. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 4-7/8" (Height) x 1-1/2" (Flange) Fastener Options :...

                  Simpson Strong Tie LU Series Standard Joist Hangers
                  Price: $0.46
                  More Information
                  Availability: Stock
                  Simpson Strong-Tie Item #: LU24EA -

                    Simpson Strong-Tie LU24 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 joists to a wood ledger or beam. You can install LU24 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 10d Nails (Header-Min) (4) 16d Nails (Header-Max) (2) 10d x 1-1/2" Nails (Joist) Load Values Using...

                    Simpson Strong Tie LUS24 Double Shear Joist Hangers
                    Price: $0.46
                    More Information
                    Availability: Stock
                    Simpson Strong-Tie Item #: LUS24EA -

                      Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 3-1/8"...

                      Simpson Strong Tie SUL24 Skewed 45 Degree Joist Hangers
                      Price: $4.41
                      More Information
                      Availability: Stock
                      Simpson Strong-Tie Item #: SUL24 -

                        The Simpson Strong-Tie SUL24 Skewed Left 2 x 4 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) 16d Nails (Face)...

                        Simpson Strong Tie U24 Standard Joist Hangers
                        Price: $1.40
                        More Information
                        Availability: Stock
                        Simpson Strong-Tie Item #: U24EA -

                          Simpson Strong Tie U24 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 10d Nails (Header - Min) (4) 16d Nails (Header - Max) (2) 10d x 1-1/2" Nails (Joist) U24 Information and Installation Instructions. Please...

                          Simpson Strong Tie HGUS Series Heavy Duty Joist Hangers
                          Price: $13.80
                          More Information
                          Availability: Stock
                          Simpson Strong-Tie Item #: HGUS26-2 -

                            Simpson Strong Tie HGUS26-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are designed to accept two 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-5/16" (Wide) x 5-7/16" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails...

                            Simpson Strong-Tie HTU26-2 Face Mount Truss Hangers
                            Price: $7.02
                            More Information
                            Availability: Stock
                            Simpson Strong-Tie Item #: HTU26-2 -

                              Simpson Strong-Tie HTU26-2 Double 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26-2 hanger very versatile for various trusses. Additionally you can have the HTU26-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...

                              Simpson Strong Tie HU28 Heavy Joist Hangers
                              Price: $4.23
                              More Information
                              Availability: Stock
                              Simpson Strong-Tie Item #: HU28 -

                                Simpson Strong Tie HU28 2 x 8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 5-1/4" (Height) x 2-1/4" (Seat Depth) Fastener Options: (6) 16d Nails (4) 10d x 1-1/2" Nails (Joist) HU28 Information and...

                                Simpson Strong Tie HUCQ Series Heavy Duty Joist Hangers
                                Price: $17.35
                                More Information
                                Availability: Ships Direct
                                Simpson Strong-Tie Item #: HUCQ210-3 -

                                  Simpson Strong Tie HUCQ210-3-SDS 4-5/8" Wide Triple 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 4-5/8" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS...

                                  Simpson Strong Tie HUS26-2 Heavy Joist Hangers
                                  Price: $5.33
                                  More Information
                                  Availability: Ships Direct
                                  Simpson Strong-Tie Item #: HUS26-2 -

                                    Simpson Strong Tie HUS26-2 Double 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/8" (Wide) x 5-3/16" (Height) x 2" (Seat Depth) Fastener Options: (4) 16d Nails (Header) (6)...

                                    Simpson Strong Tie ITS1.81/11.88 Top Flange I-Joist Hangers
                                    Price: $2.38
                                    More Information
                                    Availability: Stock
                                    Simpson Strong-Tie Item #: ITS1.81/11.88 -

                                      Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/11.88 installs 1-3/4" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...

                                      Simpson Strong Tie IUS1.81/11.88 Face Mount I-Joist Hangers
                                      Price: $2.22
                                      More Information
                                      Availability: Stock
                                      Simpson Strong-Tie Item #: IUS1.81/11.88 -

                                        Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-7/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) 10d Nails (Face) IUS1.81/11.88 Information and Installation Instructions. Please Note:...

                                        Simpson Strong-Tie LSU26Z Adjustable Light Slopeable/Skewable U Hangers
                                        Price: $4.95
                                        More Information
                                        Availability: Ships Direct
                                        Simpson Strong-Tie Item #: LSU26Z -

                                          Simpson Strong-Tie LSU26Z with ZMax Coating is a both a field slopeable and skewable hanger used to attached 2 x 6 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSU26Z hangers have a closed back they must be installed on the header or the end of the joist first. ZMax coating provides an extra level of corrosion resistance when conditions demand it. Material: 18 gauge Finish: Z-Max G-185 Coating-Level of...

                                          Simpson Strong Tie LU24 2 x 4 Joist Hangers
                                          Price: $43.00
                                          More Information
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: LU24BX -

                                            Simpson Strong-Tie LU24 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 joists to a wood ledger or beam. You can install LU24 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. Save when purchasing LU24 joist hangers by the box of 100. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 10d Nails (Header-Min) (4) 16d Nails...

                                            Simpson Strong Tie LUS Series Double Shear Joist Hangers
                                            Price: $43.50
                                            More Information
                                            Availability: Stock
                                            Simpson Strong-Tie Item #: LUS24BX -

                                              Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24 hangers are also approved for installation with SD9 Structural Screws. Save when purchased by the box of 100 hangers Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance:...

                                              Simpson Strong Tie SUR24 Skewed 45 Degree Joist Hangers
                                              Price: $4.41
                                              More Information
                                              Availability: Stock
                                              Simpson Strong-Tie Item #: SUR24 -

                                                The Simpson Strong-Tie SUR24 Skewed Right 2 x 4 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) 16d Nails...

                                                Simpson Strong Tie U26 Standard Joist Hangers
                                                Price: $1.55
                                                More Information
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: U26EA -

                                                  Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 2" (Seat Depth) Fastener Options: (6) 10d Nails (Header - Min) (6) 16d Nails (Header - Max) (4) 10d x 1-1/2" Nails (Joist) U26 Information and Installation Instructions. Please...

                                                  Simpson Strong Tie HGUS26-3 Heavy Duty Joist Hangers
                                                  Price: $17.26
                                                  More Information
                                                  Availability: Ships Direct
                                                  Simpson Strong-Tie Item #: HGUS26-3 -

                                                    Simpson Strong Tie HGUS26-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-3 hangers are designed to accept three 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 4-15/16" (Wide) x 5-1/2" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails...

                                                    Simpson Strong-Tie HTU28 Face Mount Truss Hangers
                                                    Price: $4.25
                                                    More Information
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: HTU28 -

                                                      Simpson Strong-Tie HTU28 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28 hanger very versatile for various trusses. Additionally you can have the HTU28 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...

                                                      Simpson Strong Tie HU210 Heavy Joist Hangers
                                                      Price: $4.80
                                                      More Information
                                                      Availability: Stock
                                                      Simpson Strong-Tie Item #: HU210 -

                                                        Simpson Strong Tie HU210 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 2-1/4" (Seat Depth) Fastener Options: (8) 16d Nails (4) 10d x 1-1/2" Nails (Joist) HU210 Information and...

                                                        Simpson Strong Tie HUCQ410 Heavy Duty Joist Hangers
                                                        Price: $16.90
                                                        More Information
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: HUCQ410 -

                                                          Simpson Strong Tie HUCQ410-SDS 3-9/16" Wide 4 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-9/16" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...

                                                          Simpson Strong Tie HUS28 Heavy Joist Hangers
                                                          Price: $2.71
                                                          More Information
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: HUS28 -

                                                            Simpson Strong Tie HUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS28 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-5/8" (Wide) x 7"...

                                                            Simpson Strong Tie ITS1.81/14 Top Flange I-Joist Hangers
                                                            Price: $3.14
                                                            More Information
                                                            Availability: Stock
                                                            Simpson Strong-Tie Item #: ITS1.81/14 -

                                                              Simpson Strong-Tie ITS1.81/14 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/14 installs 1-3/4" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the joist...

                                                              Simpson Strong Tie IUS1.81/14 Face Mount I-Joist Hangers
                                                              Price: $2.98
                                                              More Information
                                                              Availability: Stock
                                                              Simpson Strong-Tie Item #: IUS1.81/14 -

                                                                Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-7/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) 10d Nails (Face-Min)...

                                                                Simpson Strong-Tie LSSU28 Adjustable Light Slopeable/Skewable U Hangers
                                                                Price: $7.52
                                                                More Information
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: LSSU28 -

                                                                  Simpson Strong-Tie LSSU28 is a both a field slopeable and skewable hanger used to attached 2 x 8 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSSU28 hangers have a closed back they must be installed on the header or the end of the joist first. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 7-1/8" (Height) x 1-5/8" (Flange) Fastener Options :...

                                                                  Simpson Strong Tie LU26 Standard Joist Hangers
                                                                  Price: $0.47
                                                                  More Information
                                                                  Availability: Stock
                                                                  Simpson Strong-Tie Item #: LU26EA -

                                                                    Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-1/2" (Seat Depth) Fastener Options: (6) 10d Nails (Header-Min) (6) 16d Nails (Header-Max) (4) 10d x 1-1/2" Nails LU26 Information and...

                                                                    Simpson Strong Tie LUS24Z Double Shear Joist Hangers
                                                                    Price: $0.57
                                                                    More Information
                                                                    Availability: Stock
                                                                    Simpson Strong-Tie Item #: LUS24ZEA -

                                                                      Simpson Strong Tie LUS24Z ZMax 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24Z hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax G-185 Coating-Level of Corrosion Resistance: Medium Dimensions: 1-9/16" (Wide) x 3-1/8"...

                                                                      Simpson Strong Tie SUL26 Skewed 45 Degree Joist Hangers
                                                                      Price: $4.71
                                                                      More Information
                                                                      Availability: Stock
                                                                      Simpson Strong-Tie Item #: SUL26 -

                                                                        The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (6) 16d Nails (Face)...

                                                                        Simpson Strong Tie U Series Standard Joist Hangers
                                                                        Price: $2.45
                                                                        More Information
                                                                        Availability: Stock
                                                                        Simpson Strong-Tie Item #: U26-2EA -

                                                                          Simpson Strong Tie U26-2 Double 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/8" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (8) 10d Nails (Header - Min) (8) 16d Nails (Header - Max) (4) 10d x 1-1/2" Nails (Joist) U26-2 Information and Installation Instructions....

                                                                          Simpson Strong Tie HGUS28 Heavy Duty Joist Hangers
                                                                          Price: $16.51
                                                                          More Information
                                                                          Availability: Stock
                                                                          Simpson Strong-Tie Item #: HGUS28 -

                                                                            Simpson Strong Tie HGUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-5/8" (Wide) x 7-1/8" (Height) x 5" (Seat Depth) Fastener Options: (36) 16d Nails (Header) (12) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS28 Information and Installation Instructions. Please Note: If there are...

                                                                            Simpson Strong-Tie HTU28-2 Face Mount Truss Hangers
                                                                            Price: $7.32
                                                                            More Information
                                                                            Availability: Stock
                                                                            Simpson Strong-Tie Item #: HTU28-2 -

                                                                              Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for various trusses. Additionally you can have the HTU28-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...

                                                                              Simpson Strong Tie HU212 Heavy Joist Hangers
                                                                              Price: $5.38
                                                                              More Information
                                                                              Availability: Stock
                                                                              Simpson Strong-Tie Item #: HU212 -

                                                                                Simpson Strong Tie HU212 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 9" (Height) x 2-1/4" (Seat Depth) Fastener Options: (10) 16d Nails (6) 10d x 1-1/2" Nails (Joist) HU212 Information and...

                                                                                Simpson Strong Tie HUCQ412 Heavy Duty Joist Hangers
                                                                                Price: $18.00
                                                                                More Information
                                                                                Availability: Stock
                                                                                Simpson Strong-Tie Item #: HUCQ412 -

                                                                                  Simpson Strong Tie HUCQ412-SDS 3-9/16" Wide 4 x 12 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-9/16" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (14) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...

                                                                                  Simpson Strong Tie HUS28-2 Heavy Joist Hangers
                                                                                  Price: $5.31
                                                                                  More Information
                                                                                  Availability: Stock
                                                                                  Simpson Strong-Tie Item #: HUS28-2 -

                                                                                    Simpson Strong Tie HUS28-2 Double 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/8" (Wide) x 7-3/16" (Height) x 2" (Seat Depth) Fastener Options: (6) 16d Nails (Header) (6)...

                                                                                    Simpson Strong Tie ITS1.81/16 Top Flange I-Joist Hangers
                                                                                    Price: $4.54
                                                                                    More Information
                                                                                    Availability: Ships Direct
                                                                                    Simpson Strong-Tie Item #: ITS1.81/16 -

                                                                                      Simpson Strong-Tie ITS1.81/16 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/16 installs 1-3/4" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the joist...

                                                                                      Simpson Strong Tie IUS1.81/16 Face Mount I-Joist Hangers
                                                                                      Price: $3.27
                                                                                      More Information
                                                                                      Availability: Ships Direct
                                                                                      Simpson Strong-Tie Item #: IUS1.81/16 -

                                                                                        Simpson Strong-Tie IUS1.81/16 is used to install 1-3/4" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-7/8" (Wide) x 16" (Height) x 2" (Seat Depth) Fastener Options : (14) 10d Nails (Face-Min)...

                                                                                        Simpson Strong-Tie LSSU210 Adjustable Light Slopeable/Skewable U Hangers
                                                                                        Price: $7.72
                                                                                        More Information
                                                                                        Availability: Stock
                                                                                        Simpson Strong-Tie Item #: LSSU210 -

                                                                                          Simpson Strong-Tie LSSU210 is a both a field slopeable and skewable hanger used to attached 2 x 10 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSSU210 hangers have a closed back they must be installed on the header or the end of the joist first. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 8-1/2" (Height) x 1-5/8" (Flange) Fastener...

                                                                                          Simpson Strong Tie LU26 Standard Joist Hangers
                                                                                          Price: $43.50
                                                                                          More Information
                                                                                          Availability: Stock
                                                                                          Simpson Strong-Tie Item #: LU26BX -

                                                                                            Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. Save when purchasing LU26 joist hangers by the box of 100. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-1/2" (Seat Depth) Fastener Options: (6) 10d Nails (Header-Min) (6) 16d Nails...

                                                                                            Simpson Strong Tie LUS Series Double Shear Joist Hangers
                                                                                            Price: $53.00
                                                                                            More Information
                                                                                            Availability: Stock
                                                                                            Simpson Strong-Tie Item #: LUS24ZBX -

                                                                                              Simpson Strong Tie LUS24Z ZMax 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24Z hangers are also approved for installation with SD9 Structural Screws. Save when purchased by the box of 100 hangers Material: 18 gauge Finish: ZMax G-185 Coating-Level of Corrosion...

                                                                                              Simpson Strong Tie SUR26 Skewed 45 Degree Joist Hangers
                                                                                              Price: $4.71
                                                                                              More Information
                                                                                              Availability: Stock
                                                                                              Simpson Strong-Tie Item #: SUR26 -

                                                                                                The Simpson Strong-Tie SUR26 Skewed Right 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (6) 16d Nails...

                                                                                                Simpson Strong Tie U26-3 Standard Joist Hangers
                                                                                                Price: $6.00
                                                                                                More Information
                                                                                                Availability: Ships Direct
                                                                                                Simpson Strong-Tie Item #: U26-3EA -

                                                                                                  Simpson Strong Tie U26-3 Triple 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 4-5/8" (Wide) x 4-1/4" (Height) x 2" (Seat Depth) Fastener Options: (8) 10d Nails (Header - Min) (8) 16d Nails (Header - Max) (4) 10d x 1-1/2" Nails (Joist) U26-3 Information and Installation...

                                                                                                   
                                                                                                  DHC Supplies Payment Options DHC Supplies, Inc is an Upfront Merchant on TheFind. Click for info.

                                                                                                  Website prices are for online sales only. Individual branch prices may differ depending on the item, delivery method, and payment terms. Please contact your local DHC Supplies store for more information.

                                                                                                  For question regarding our service pledge and policies please visit our Service and Policy statement page.

                                                                                                  We know your security and privacy are important. Please view our Security and Privacy page for more details.

                                                                                                  Many data pages may require Adobe Acrobat® Reader® to view..

                                                                                                  Any trademarks used are the properties of their respective owners..

                                                                                                  Should you have any comments or concerns regarding this website please contact our webmaster.

                                                                                                  All information on this site is for informational purposes only and may not be up to date. We have provided additional information links on the product page whenever possible. Please refer to these links for confirmation of data provided. DHC Supplies, Inc. does not warrant any information provided by third parties..

                                                                                                  View Catalog Page

                                                                                                  © 2015 DHC Supplies, Inc.