Login      View Cart   Checkout   Wish List
Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Hex Plated Coupling Nut
Availability: Stock
Bay Standard Mfg Item #: CPN12 -

    1/2" Coupling Nuts are used to connected two 1/2" threaded rods together or extend a 1/2" anchor bolt. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship as many of these qualifying items as we can for one flat rate depending on the...

    1/2" - 13 Zinc Plated Hex Nut
    Availability: Stock
    Bay Standard Mfg Item #: NP12 -

      1/2" - 13 Zinc Plated Hex Nuts for either 1/2" machine bolts or all thread rod. Uses 3/4" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or threaded rod. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship...

      Square Bearing Plate Washer
      Availability: Stock
      Bay Standard Mfg Item #: BP12 -

        BP12 1/2" X 2" Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and should not be used with ACQ lumber. Hole Size: 9/16" Dimension: 2" x 2" Thickness: 3/16" Coating: None Mild Steel Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in...

        1/2" Plain Malleable Cast Iron Washers
        Availability: Stock
        Bay Standard Mfg Item #: MW12 -

          1/2" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washer are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating: None ...

          All Thread Extension Rods
          Availability: Stock
          Bay Standard Mfg Item #: ALLP1212 -

            These 1/2" x 12" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. Please Note: This all thread is cut in our own shop. Bare ends are painted with galvanizing spray paint. Special lengths (1/2" increments) up to 48" long can be cut upon request. Please call 800-323-2999 for a quote. A307 Grade 2 Zinc Plated Special lengths available upon request ...

            1/2" x 3" Plated Carriage Bolt
            Availability: Stock
            Bay Standard Mfg Item #: CP1230 -

              These 1/2" x 3" Plated Carriage Bolts are different than standard hex bolt because they feature a decorative dome head that is partial counter sunk into the wood. The section directly below the head is square shaped that stops the bolt from spinning during installation. Grade 2 ASTM A307 Zinc Plated Dome Head Imported Hex Nut Not Included USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are...

              Plated Lag Screw
              Availability: Stock
              Bay Standard Mfg Item #: LP1230 -

                These 1/2" x 3" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the...

                1/2" - 13 Hot Dipped Galvanized Hex Nut
                Availability: Stock
                Bay Standard Mfg Item #: N12HDG -

                  1/2" - 13 Hot Dipped Galvanized Hex Nuts for either 1/2" HDG machine bolts or all thread rod. Uses 3/4" socket to install. Important: These HDG hex nuts will only fit hot galvanized bolts or threaded rod. Do not use on plain or zinc plated bolts. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online....

                  Square Bearing Plate Washer
                  Availability: Stock
                  Bay Standard Mfg Item #: BP12BX -

                    BP12 1/2" X 2" Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and should not be used with ACQ lumber. Hole Size: 9/16" Dimension: 2" x 2" Thickness: 3/16" Coating: None Mild Steel Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in...

                    1/2" Plain Malleable Cast Iron Washers
                    Availability: Stock
                    Bay Standard Mfg Item #: MW12BX -

                      1/2" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washer are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Save on shipping when purchased by the box of 100 washers! Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating:...

                      All Thread Extension Rods
                      Availability: Stock
                      Bay Standard Mfg Item #: ALLP1224 -

                        These 1/2" x 24" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. Please Note: This all thread is cut in our own shop. Bare ends are painted with galvanizing spray paint. Special lengths (1/2" increments) up to 48" long can be cut upon request. Please call 800-323-2999 for a quote. A307 Grade 2 Zinc Plated Special lengths available upon request ...

                        1/2" x 4" Plated Carriage Bolt
                        Availability: Stock
                        Bay Standard Mfg Item #: CP1240 -

                          These 1/2" x 4" Plated Carriage Bolts are different than standard hex bolt because they feature a decorative dome head that is partial counter sunk into the wood. The section directly below the head is square shaped that stops the bolt from spinning during installation. Grade 2 ASTM A307 Zinc Plated Dome Head Imported Hex Nut Not Included USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are...

                          Plated Lag Screw
                          Availability: Stock
                          Bay Standard Mfg Item #: LP1240 -

                            These 1/2" x 4" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the...

                            1/2" Zinc Plated USS Flat Washer
                            Availability: Stock
                            Bay Standard Mfg Item #: WP12 -

                              1/2" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 1/2" Inside Diameter: 9/16" Outside Diameter: 1-3/8" USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight...

                              5/8" Hex Plated Coupling Nut with Witness Hole
                              Availability: Stock
                              Bay Standard Mfg Item #: CPNW58 -

                                5/8" x 1-7/8" (H) Witness Hole Coupling Nuts are used to connected two 5/8" threaded rods together or extend a 5/8" SSTB or standard anchor bolt. The witness hole allows the inspector to confirm the rods are connected properly. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to...

                                Hex Head 1/2" x 4" Zinc Plated Machine Bolt
                                Availability: Stock
                                Bay Standard Mfg Item #: MP1240 -

                                  These 1/2" x 4" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship as many of these qualifying...

                                  1/2" Hot Dipped Galvanized Malleable Cast Iron Washers
                                  Availability: Stock
                                  Bay Standard Mfg Item #: MW12HDG -

                                    1/2" Hot Dipped Galvanized Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washers are hot dipped galvanized providing corrosion protection when required. Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating: Hot Dipped Galvanized ...

                                    1/2" Hot Dipped Galvanized USS Flat Washer
                                    Availability: Stock
                                    Bay Standard Mfg Item #: W12HDG -

                                      1/2" USS Hot Dipped Galvanized Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Hot Dipped Galvanizing provides corrosion resistance to allow you to these washers with ACQ lumber. Bolt Size: 1/2" Inside Diameter: 9/16" Outside Diameter: 1-3/8" USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping...

                                      Hot Dipped Galvanized Square Washer Bearing Plates
                                      Availability: Stock
                                      Bay Standard Mfg Item #: BP12-2HDG -

                                        BP12-2HDG 1/2" X 2" Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot dipped galvanized to protect the washer from corrosion when exposed to the elements as well as coming in contact with ACQ lumber. Hole Size: 9/16" Dimension: 2" x 2" Thickness: 3/16" Coating: Hot Dipped Galvanized Mild Steel Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items...

                                        All Thread Extension Rods
                                        Availability: Stock
                                        Bay Standard Mfg Item #: ALLP1236 -

                                          These 1/2" x 36" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. Please Note: This all thread is cut in our own shop. Bare ends are painted with galvanizing spray paint. Special lengths (1/2" increments) up to 48" long can be cut upon request. Please call 800-323-2999 for a quote. A307 Grade 2 Zinc Plated Special lengths available upon request ...

                                          1/2" x 5" Plated Carriage Bolt
                                          Availability: Stock
                                          Bay Standard Mfg Item #: CP1250 -

                                            These 1/2" x 5" Plated Carriage Bolts are different than standard hex bolt because they feature a decorative dome head that is partial counter sunk into the wood. The section directly below the head is square shaped that stops the bolt from spinning during installation. Grade 2 ASTM A307 Zinc Plated Dome Head Imported Hex Nut Not Included USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are...

                                            Plated Lag Screw
                                            Availability: Stock
                                            Bay Standard Mfg Item #: LP1250 -

                                              These 1/2" x 5" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the...

                                              Hex Hot Dipped Galvanized Coupling Nut
                                              Availability: Stock
                                              Bay Standard Mfg Item #: CN58HDG -

                                                5/8" Hot Dipped Galvanized Coupling Nuts are used to connected two HDG 5/8" threaded rods together or extend a 5/8" SSTB-HDG or standard anchor bolt. Hot Dipped Hex Head Imported Important: Hot dipped coupling nuts can only be used with HDG bolts or threaded rod. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to...

                                                5/8" - 11 Zinc Plated Hex Nut
                                                Availability: Stock
                                                Bay Standard Mfg Item #: NP58 -

                                                  5/8" - 11 Zinc Plated Hex Nuts for either 5/8" machine bolts or all thread rod. Uses 15/16" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or threaded rod. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will...

                                                  Hex Head 1/2" x 5" Zinc Plated Machine Bolt
                                                  Availability: Stock
                                                  Bay Standard Mfg Item #: MP1250 -

                                                    These 1/2" x 5" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship as many of these qualifying...

                                                    1/2" Hot Dipped Galvanized Malleable Cast Iron Washers
                                                    Availability: Stock
                                                    Bay Standard Mfg Item #: MW12HDGBX -

                                                      1/2" Hot Dipped Galvanized Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washers are hot dipped galvanized providing corrosion protection when required. Save on shipping when purchased by the box of 100 washers! Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating: Hot Dipped...

                                                      Hot Dipped Galvanized Square Washer Bearing Plates
                                                      Availability: Stock
                                                      Bay Standard Mfg Item #: BP12-2HDGBX -

                                                        BP12-2HDG (100 Pieces) 1/2" X 2" Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot dipped galvanized to protect the washer from corrosion when exposed to the elements as well as coming in contact with ACQ lumber. Hole Size: 9/16" Dimension: 2" x 2" Thickness: 3/16" Coating: Hot Dipped Galvanized Mild Steel Imported USPS FLAT RATE SHIPPING OPTION! Many of...

                                                        All Thread Extension Rods
                                                        Availability: Stock
                                                        Bay Standard Mfg Item #: ALLP1248 -

                                                          These 1/2" x 48" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. Please Note: This all thread is cut in our own shop. Bare ends are painted with galvanizing spray paint. Special lengths (1/2" increments) up to 48" long can be cut upon request. Please call 800-323-2999 for a quote. A307 Grade 2 Zinc Plated Special lengths available upon request ...

                                                          1/2" x 6" Plated Carriage Bolt
                                                          Availability: Stock
                                                          Bay Standard Mfg Item #: CP1260 -

                                                            These 1/2" x 6" Plated Carriage Bolts are different than standard hex bolt because they feature a decorative dome head that is partial counter sunk into the wood. The section directly below the head is square shaped that stops the bolt from spinning during installation. Grade 2 ASTM A307 Zinc Plated Dome Head Imported Hex Nut Not Included USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are...

                                                            Plated Lag Screw
                                                            Availability: Stock
                                                            Bay Standard Mfg Item #: LP1260 -

                                                              These 1/2" x 6" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the...

                                                              5/8" - 11 Zinc Plated Hex Nut
                                                              Availability: Stock
                                                              Bay Standard Mfg Item #: N58HDG -

                                                                5/8" - 11 Hot Dipped Galvanized Hex Nuts for either 5/8" HDG machine bolts or all thread rod. Uses 15/16" socket to install. Important: These HDG hex nuts will only fit hot galvanized bolts or threaded rod. Do not use on plain or zinc plated bolts. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase...

                                                                Simpson Strong-Tie Coupling Nut with Witness Hole
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: CNW58 -

                                                                  Simpson Strong-Tie CNW5/8 coupling nuts are a tested and load rated method to join 5/8" threaded rod and 5/8" anchor bolts. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW5/8 meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. Minimum Overall Length: 1-7/8" CNW5/8 Information and Data ...

                                                                  5/8" Zinc Plated USS Flat Washer
                                                                  Availability: Stock
                                                                  Bay Standard Mfg Item #: WP58 -

                                                                    5/8" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 5/8" Inside Diameter: 11/16" Outside Diameter: 1-3/4" USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on...

                                                                    Hex Head 1/2" x 6" Zinc Plated Machine Bolt
                                                                    Availability: Stock
                                                                    Bay Standard Mfg Item #: MP1260 -

                                                                      These 1/2" x 6" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship as many of these qualifying...

                                                                      Plated Lag Screw
                                                                      Availability: Stock
                                                                      Bay Standard Mfg Item #: LP1270 -

                                                                        These 1/2" x 7" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the...

                                                                        3/4" Hex Plated Coupling Nut
                                                                        Availability: Stock
                                                                        Bay Standard Mfg Item #: CPN34 -

                                                                          3/4" Coupling Nuts are used to connected two 3/4" threaded rods together or extend a 3/4" anchor bolt. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship as many of these qualifying items as we can for one flat rate depending on the...

                                                                          3/4" - 10 Zinc Plated Hex Nut
                                                                          Availability: Stock
                                                                          Bay Standard Mfg Item #: NP34 -

                                                                            3/4" - 10 Zinc Plated Hex Nuts for either 5/8" machine bolts or all thread rod. Uses 1-1/8" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or threaded rod. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will...

                                                                            5/8" Hot Dipped Galvanized USS Flat Washer
                                                                            Availability: Stock
                                                                            Bay Standard Mfg Item #: W58HDG -

                                                                              5/8" USS Hot Dipped Galvanized Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Hot Dipped Galvanizing provides corrosion resistance to allow you to these washers with ACQ lumber. Bolt Size: 5/8" Inside Diameter: 11/16" Outside Diameter: 1-3/4" USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since...

                                                                              5/8" Malleable Cast Iron Washers
                                                                              Availability: Stock
                                                                              Bay Standard Mfg Item #: MW58 -

                                                                                5/8" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 5/8" bolt heads and nuts from pulling into the wood. These washers are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Bolt Hole Size: 11/16" Approximate Outside Diameter: 2-5/8" Approximate Washer Thickness: 1/4" Coating: None ...

                                                                                Hex Head 1/2" x 7" Zinc Plated Machine Bolt
                                                                                Availability: Stock
                                                                                Bay Standard Mfg Item #: MP1270 -

                                                                                  These 1/2" x 7" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship as many of these qualifying...

                                                                                  1/2" x 8" Plated Carriage Bolt
                                                                                  Availability: Stock
                                                                                  Bay Standard Mfg Item #: CP1280 -

                                                                                    These 1/2" x 8" Plated Carriage Bolts are different than standard hex bolt because they feature a decorative dome head that is partial counter sunk into the wood. The section directly below the head is square shaped that stops the bolt from spinning during installation. Grade 2 ASTM A307 Zinc Plated Dome Head Imported Hex Nut Not Included USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are...

                                                                                    Plated Lag Screw
                                                                                    Availability: Stock
                                                                                    Bay Standard Mfg Item #: LP1280 -

                                                                                      These 1/2" x 8" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the...

                                                                                      3/4" Hex Hot Dipped Galvanized Coupling Nut
                                                                                      Availability: Special
                                                                                      Bay Standard Mfg Item #: CN34HDG -

                                                                                        3/4" Hot Dipped Galvanized Coupling Nuts are used to connected two HDG 3/4" threaded rods together or extend a 3/4" HDG anchor bolt. Hot Dipped Hex Head Imported Important: Hot dipped coupling nuts can only be used with HDG bolts or threaded rod. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online....

                                                                                        3/4" - 10 Zinc Plated Hex Nut
                                                                                        Availability: Stock
                                                                                        Bay Standard Mfg Item #: N34HDG -

                                                                                          3/4" - 10 Hot Dipped Galvanized Hex Nuts for either 3/4" HDG machine bolts or all thread rod. Uses 1-1/8" socket to install. Important: These HDG hex nuts will only fit hot galvanized bolts or threaded rod. Do not use on plain or zinc plated bolts. USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase...

                                                                                          3/4" Zinc Plated USS Flat Washer
                                                                                          Availability: Stock
                                                                                          Bay Standard Mfg Item #: WP34 -

                                                                                            3/4" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 3/4" Inside Diameter: 13/16" Outside Diameter: 2" USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight...

                                                                                            5/8" Malleable Cast Iron Washers
                                                                                            Availability: Stock
                                                                                            Bay Standard Mfg Item #: MW58BX -

                                                                                              5/8" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 5/8" bolt heads and nuts from pulling into the wood. These washers are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Save on shipping when purchased by the box of 100 washers! Bolt Hole Size: 11/16" Approximate Outside Diameter: 2-5/8" Approximate Washer Thickness: 1/4" Coating:...

                                                                                              Hex Head 1/2" x 8" Zinc Plated Machine Bolt
                                                                                              Availability: Stock
                                                                                              Bay Standard Mfg Item #: MP1280 -

                                                                                                These 1/2" x 8" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported USPS FLAT RATE SHIPPING OPTION! Many of the small items we sell (nails, staples, anchors, hardware, blades and more) can be packed in small boxes but are heavy in weight. Since shipping is based on weight the cost is often too high to purchase online. We have the solution! We will ship as many of these qualifying...

                                                                                                Simpson Strong-Tie Coupling Nut with Witness Hole
                                                                                                Availability: Stock
                                                                                                Simpson Strong-Tie Item #: CNW34 -

                                                                                                  Simpson Strong-Tie CNW3/4 coupling nuts are a tested and load rated method to join 3/4" threaded rod and 3/4" anchor bolts. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW3/4 meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. Minimum Overall Length: 2-1/4" CNW3/4 Information and Data ...