Login/Register
Shopping Cart
OR
Filter
Sort By
With the Simpson Strong-Tie SDWC15600-KT 6" Structural Screws you will now have the flexibility to provide an approved connection even after the exterior shear wall has been installed. The labor...
With the Simpson Strong-Tie SDWC15600-KT 6" Structural Screws you will now have the flexibility to provide an approved connection even after the exterior shear wall has been installed. The labor savings installing the SDWC15600-KT 6" Structural Screws as opposed to installing traditional ties and straps will more than offset the costs of the fasteners. The 6-lobe drive using a T-30 bit reduces your chance of stripping out the screw, enabling a quick and secure installation. Fully threaded...
The THDB25300H 1/4" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THDB25300H 1/4" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
The Simpson Strong-Tie THDB25312CS 1/4" x 3-1/2" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...
The Simpson Strong-Tie THDB25312CS 1/4" x 3-1/2" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...
The Simpson Strong-Tie THDC25300H6SS Type 316 Stainless Steel 1/4" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THDC25300H6SS Type 316 Stainless Steel 1/4" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie TNT25114H Titen Turbo™ 1/4" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT25114H Titen Turbo™ 1/4" x 1-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...
These 1/2" x 5" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary...
These 1/2" x 5" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
These 1/2" x 7" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length May...
These 1/2" x 7" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...
5/8" - 11 Hot Dipped Galvanized Hex Nuts for either 5/8" HDG machine bolts or all thread rod. Uses 15/16" socket to install. Important: These HDG hex nuts will only fit hot galvanized bolts or...
5/8" - 11 Hot Dipped Galvanized Hex Nuts for either 5/8" HDG machine bolts or all thread rod. Uses 15/16" socket to install. Important: These HDG hex nuts will only fit hot galvanized bolts or threaded rod. Do NOT use on plain or zinc plated bolts. Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average coating weight is 2.0 oz./ft2 (per ASTM A123 total both sides)....
5/8" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 5/8" bolt heads and nuts from...
5/8" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 5/8" bolt heads and nuts from pulling into the wood. These washers are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Bolt Hole Size: 11/16" Approximate Outside Diameter: 2-5/8" Approximate Washer Thickness: 1/4" Coating: None Explanation of "Stock" Availability Term Stock items...
5/8" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and...
5/8" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 5/8" Inside Diameter: 11/16" Outside Diameter: 1-3/4" Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
The Grip Rite 1/4" Hammer Tacker is an easy-to-use hammer tacker suitable for stapling fitted carpets, insulation materials, labels, etc. For A19-1/4" Flat Wire Staples Easy rear-load magazine...
The Grip Rite 1/4" Hammer Tacker is an easy-to-use hammer tacker suitable for stapling fitted carpets, insulation materials, labels, etc. For A19-1/4" Flat Wire Staples Easy rear-load magazine Lightweight Powerful Durable Comfort grip High Capacity 90-Day warranty Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock or do not have enough...
The Grip Rite LP212STRBK Red 2-1/2" x #9 PrimeGuard Plus Deck Screws are the ideal screw for many decking projects. The 6-point (T25) Star Drive provides additional torque during installation as...
The Grip Rite LP212STRBK Red 2-1/2" x #9 PrimeGuard Plus Deck Screws are the ideal screw for many decking projects. The 6-point (T25) Star Drive provides additional torque during installation as well as less chance of stripping. Exterior grade proprietary PrimeGuard PlusĀ® coating with a lifetime guarantee against rust and corrosion when used with treated lumber Type 17 point reduces need to pre-drill and prevents wood-splitting Ideal for all exterior material applications Tapered,...
The GRK R492XL 2" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast Bite Tip...
The GRK R492XL 2" x #9 Multi-Purpose Framing Screw is the ideal screw for various wood to wood fastening projects where secure holding power and structural strength are important. The Fast Bite Tip eliminates pre-drilling and provides a fast start for one step installation. Combined with the W-Cut™ low installation torque allows these screws are installed quickly and accurately. The GRK Climatek™ coating provides superior corrosion resistance, allowing the screw to be used in both...
Hy-Tek 120M30H 3" x .120" Hot Dipped Galvanized Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and...
Hy-Tek 120M30H 3" x .120" Hot Dipped Galvanized Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. For more information regarding the...
This 1-1/2" x .148 Heat Treated Metal Connector Nail is designed to be used in 31 Degree Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist...
This 1-1/2" x .148 Heat Treated Metal Connector Nail is designed to be used in 31 Degree Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please Note: Consult your...
The Quick Build Pro 158DWSCC5LB #6 x 1-5/8" Black Coarse Drywall Screws are ideal for wood-to-wood or drywall to wood connections when no corrosion resistance is required. Coarse thread screws...
The Quick Build Pro 158DWSCC5LB #6 x 1-5/8" Black Coarse Drywall Screws are ideal for wood-to-wood or drywall to wood connections when no corrosion resistance is required. Coarse thread screws provide plenty of bite to make a secure connection. Packaged in a 5 lb. box (Approximately 1,100 Screws) when your quantity needs are limited. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's...