Products 1-48 of 121
Show
Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws
Price: $5.55
More Information
Availability: Stock
Simpson Strong-Tie Item #: HGA10EA -

    The Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws Material: 14 Gauge Finish: Standard G90 Zinc Fastener Options: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10 Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90...

    Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws
    Price: $52.00
    More Information
    Availability: Stock
    Simpson Strong-Tie Item #: HGA10BX -

      The Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws. Save by purchasing by the box of 10 HGA10 angles. Material: 14 Gauge Finish: Standard G90 Zinc Fastener Options: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10 Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc...

      Simpson Strong-Tie A34 Framing Clip
      Price: $0.30
      More Information
      Availability: Stock
      Simpson Strong-Tie Item #: A34EA -

        The Simpson Strong-Tie A34 Framing Clips for connecting wood to wood at a 90° angle. Material: 18 Gauge Finish: Standard G90 Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information & Installation Instructions Please Note: If there are any items on the Simpson website that you do not see on the DHC Supplies website we will gladly special order them. Most special order Simpson items ship the same or next business day. Call us at 800-323-2999 for...

        Simpson Strong-Tie CJT Concealed Joist Ties
        Price: $21.86
        More Information
        Availability: Stock
        Simpson Strong-Tie Item #: CJT3S -

          The Simpson Strong-Tie CJT3S is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3S short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 6 Glulam Beam - 3-1/8" x 7-1/2" PSL - 3-1/2 x...

          Simpson Strong-Tie DSC2L Drag Strut Connectors
          Price: $29.95
          More Information
          Availability: Stock
          Simpson Strong-Tie Item #: DSC2L -

            The DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2L-SDS3 Information and Installation Instructions. Please Note: If there are any items on the Simpson website that you do...

            Simpson Strong-Tie GBC Gable Brace Connector
            Price: $3.67
            More Information
            Availability: Stock
            Simpson Strong-Tie Item #: GBCEA -

              Simpson Strong-Tie GBC Gable Brace Connector provides improved anchorage of gable bracing to the exterior wall. Installation flexibility for brace angle. GBC has tension and compression capacities. GBC clips must be installed in pairs to reach full load capacity. Material: 16 Gauge Finish: Standard G90 Zinc Installation Angles: 40° to 60° Fasteners-Gable Brace: (5) 8d x 1-1/2" Nails Fasteners-Top Plates: (7) 8d Nails GBC Information and Installation Instructions. ...

              Simpson Strong-Tie H1 Hurricane Clip
              Price: $0.59
              More Information
              Availability: Stock
              Simpson Strong-Tie Item #: H1EA -

                The Simpson Strong-Tie H1 Hurricane and Seismic Ties are designed to provide a secure connection between a 2x rafter and the double top plate at the point where the rafter rests on the plate. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners - To Rafter: (6) 8d x 1-1/2" Nails Fasteners - To Double Top Plate: (4) 8d Nails H1 Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per square foot...

                Simpson Strong-Tie HL Series Heavy Angle
                Price: $4.89
                More Information
                Availability: Stock
                Simpson Strong-Tie Item #: HL33EA -

                  Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL Heavy Angle Information and Installation Instructions. Please Note: If there are any items on the Simpson...

                  Simpson Strong-Tie L Series Reinforcing Angle
                  Price: $0.62
                  More Information
                  Availability: Stock
                  Simpson Strong-Tie Item #: L30EA -

                    The Simpson Strong-Tie L30 Reinforcing Angle are a 3" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L30 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Length: 3" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (4) 10d x 1-1/2" (4) SD #9 x 1-1/2" L30 Information & Installation Instructions...

                    Simpson Strong-Tie LS Series Skewable Angles
                    Price: $0.88
                    More Information
                    Availability: Stock
                    Simpson Strong-Tie Item #: LS30EA -

                      The Simpson Strong-Tie LS30 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" " LS30 Information & Installation Instructions Corrosion Protection...

                      Simpson Strong-Tie STC/DTC Roof Truss Clips
                      Price: $0.45
                      More Information
                      Availability: Stock
                      Simpson Strong-Tie Item #: STCEA -

                        The Simpson Strong-Tie STC Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The STC has a single 1-1/2" slot that will permit the truss chord to move vertically when loads are applied to the roof. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (3) 8d Nails STC Information and Installation Instructions ...

                        Simpson Strong Tie TA9Z Staircase Angles
                        Price: $2.80
                        More Information
                        Availability: Stock
                        Simpson Strong-Tie Item #: TA9Z -

                          Simpson Strong-Tie TA9Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Finish: ZMAX® coating Material: 12 Gauge Fasteners: SDS25112 Screws - (3) Stringer, (2) Tread Dimensions: 8-1/4" Length x 1-1/2" (Flange Width) TA9Z Information & Installation Instructions Corrosion Protection Information Z-Max G-185 Coating:...

                          Simpson Strong-Tie A34 Framing Clip
                          Price: $28.20
                          More Information
                          Availability: Stock
                          Simpson Strong-Tie Item #: A34BX -

                            The Simpson Strong-Tie A34 Framing Clips for connecting wood to wood at a 90° angle. Save by purchasing A34 clips by the box of 100! Material: 18 Gauge Finish: Standard G90 Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information & Installation Instructions Please Note: If there are any items on the Simpson website that you do not see on the DHC Supplies website we will gladly special order them. Most special order Simpson items ship the same or...

                            Simpson Strong-Tie CJT Concealed Joist Ties
                            Price: $21.86
                            More Information
                            Availability: Stock
                            Simpson Strong-Tie Item #: CJT3L -

                              The Simpson Strong-Tie CJT3L is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3L long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 8 Glulam Beam - 5-1/8" x 7-1/2" Material: 12 Gauge Finish:...

                              Simpson Strong-Tie DSC2R-SDS3 Drag Strut Connectors
                              Price: $29.95
                              More Information
                              Availability: Stock
                              Simpson Strong-Tie Item #: DSC2R -

                                The DSC2R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2R-SDS3 Information and Installation Instructions. Please Note: If there are any items on the Simpson website that you do...

                                Simpson Strong-Tie GBC Gable Brace Connector
                                Price: $85.75
                                More Information
                                Availability: Stock
                                Simpson Strong-Tie Item #: GBCBX -

                                  Simpson Strong-Tie GBC Gable Brace Connector provides improved anchorage of gable bracing to the exterior wall. Installation flexibility for brace angle. GBC has tension and compression capacities. GBC clips must be installed in pairs to reach full load capacity. Save on GBC clips when purchased by the box of 25 pieces. Material: 16 Gauge Finish: Standard G90 Zinc Installation Angles: 40° to 60° Fasteners-Gable Brace: (5) 8d x 1-1/2" Nails Fasteners-Top Plates: (7) 8d Nails GBC...

                                  Simpson Strong-Tie H1 Hurricane Clip
                                  Price: $55.46
                                  More Information
                                  Availability: Stock
                                  Simpson Strong-Tie Item #: H1BX -

                                    The Simpson Strong-Tie H1 Seismic and Hurricane Ties are designed to provide a secure connection between a 2x rafter and the double top plate at the point where the rafter rests on the plate. Save on H1 ties by purchasing in boxes of 100 pieces! Material: 18 Gauge Finish: Standard G90 Zinc Fasteners - To Rafter: (6) 8d x 1-1/2" Nails Fasteners - To Double Top Plate: (4) 8d Nails H1 Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc Coating: Zinc...

                                    Simpson Strong-Tie HL Series Heavy Angle
                                    Price: $6.43
                                    More Information
                                    Availability: Ships Direct
                                    Simpson Strong-Tie Item #: HL33HDG -

                                      Simpson Strong-Tie HL33HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized-Level of Corrosion Resistance: Medium Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2)...

                                      Simpson Strong-Tie L Series Reinforcing Angle
                                      Price: $58.26
                                      More Information
                                      Availability: Stock
                                      Simpson Strong-Tie Item #: L30BX -

                                        The Simpson Strong-Tie L30 Reinforcing Angle are a 3" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L30 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Save by purchasing by the box of 100 pieces Material: 16 Gauge Finish: Standard G90 Length: 3" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (4) 10d x 1-1/2" (4) SD #9 x 1-1/2" L30...

                                        Simpson Strong-Tie LS Series Skewable Angles
                                        Price: $41.00
                                        More Information
                                        Availability: Stock
                                        Simpson Strong-Tie Item #: LS30BX -

                                          The Simpson Strong-Tie LS30 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Save when you purchase by the box of 50 pieces! Material: 18 Gauge Finish: Standard G90 Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" " LS30 Information &...

                                          Simpson Strong-Tie STC/DTC Roof Truss Clips
                                          Price: $82.00
                                          More Information
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: STCBX -

                                            The Simpson Strong-Tie STC Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The STC has a single 1-1/2" slot that will permit the truss chord to move vertically when loads are applied to the roof. Save when purchased by the box of 200 pieces. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (3) 8d Nails STC Information and Installation Instructions ...

                                            Simpson Strong Tie TA9Z Staircase Angles
                                            Price: $130.50
                                            More Information
                                            Availability: Stock
                                            Simpson Strong-Tie Item #: TA9Z-50 -

                                              Simpson Strong-Tie TA9Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Save when purchased by the box of 50 angles! Finish: ZMAX® coating Material: 12 Gauge Fasteners: SDS25112 Screws - (3) Stringer, (2) Tread Dimensions: 8-1/4" Length x 1-1/2" (Flange Width) TA9Z Information & Installation Instructions Corrosion...

                                              Simpson Strong-Tie A34 Framing Clip
                                              Price: $0.47
                                              More Information
                                              Availability: Stock
                                              Simpson Strong-Tie Item #: A34ZEA -

                                                The Simpson Strong-Tie A34 Framing Clips for connecting wood to wood at a 90° angle. Zmax coating provides corrosion resistance when required. Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34Z Information & Installation Instructions Please Note: If there are any items on the Simpson website that you do not see on the DHC Supplies website we will gladly special order them. Most special order Simpson items ship the same or next business day. Call us at...

                                                Simpson Strong-Tie CJT Concealed Joist Ties
                                                Price: $23.25
                                                More Information
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: CJT4S -

                                                  The Simpson Strong-Tie CJT4S is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT4S short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 10 Glulam Beam - 3-1/8" x 9" PSL - 3-1/2 x 9-1/2"...

                                                  Simpson Strong-Tie DSC5L Drag Strut Connectors
                                                  Price: $71.95
                                                  More Information
                                                  Availability: Stock
                                                  Simpson Strong-Tie Item #: DSC5L -

                                                    The DSC5L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. The DSC5L-SDS3 series drag strut connectors requires 40% less fasteners than the DSC4L connector but gets 12% higher loads. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint-Level of Corrosion Resistance: Low Dimensions: 21" (Length) x 3" (Flanges) Included Fasteners: (24) SDS 1/4"...

                                                    Simpson Strong-Tie STC/DTC Roof Truss Clips
                                                    Price: $1.20
                                                    More Information
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: DTCEA -

                                                      The Simpson Strong-Tie DTC Double Slotted Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The DTC has two 1-1/2" slots that will permit the truss chord to move vertically when loads are applied to the roof. The double slot increases the allowable load values Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (6) 8d Nails STC Information and Installation Instructions ...

                                                      Simpson Strong-Tie H1 Hurricane Clip
                                                      Price: $0.71
                                                      More Information
                                                      Availability: Stock
                                                      Simpson Strong-Tie Item #: H1ZEA -

                                                        The Simpson Strong-Tie H1Z Hurricane Ties with Z-Max Corrosion Resistance are designed to provide a secure connection between a 2x rafter and the double top plate at the point where the rafter rests on the plate. Material: 18 Gauge Finish: Z-Max Fasteners - To Rafter: (6) 8d x 1-1/2" Nails Fasteners - To Double Top Plate: (4) 8d Nails H1Z Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per...

                                                        Simpson Strong-Tie HL Series Heavy Angle
                                                        Price: $9.66
                                                        More Information
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: HL35EA -

                                                          Simpson Strong-Tie HL35 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 5" (L) Bolt Holes: (4) 1/2" HL Heavy Angle Information and Installation Instructions. Please Note: If there are any items on the Simpson website...

                                                          Simpson Strong-Tie L Series Reinforcing Angle
                                                          Price: $1.01
                                                          More Information
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: L50EA -

                                                            The Simpson Strong-Tie L50 Reinforcing Angle are a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L50 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Length: 5" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (6) 10d x 1-1/2" (6) SD #9 x 1-1/2" L50 Information & Installation Instructions...

                                                            Simpson Strong-Tie LS Series Skewable Angles
                                                            Price: $1.36
                                                            More Information
                                                            Availability: Stock
                                                            Simpson Strong-Tie Item #: LS30ZEA -

                                                              The Simpson Strong-Tie LS30Z Skewable Reinforcing Angles with ZMax Protective Coating is field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS30Z Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. . Material: 18 Gauge Finish: Zmax Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" " LS30Z Information & Installation...

                                                              Simpson Strong Tie TA10Z Staircase Angles
                                                              Price: $3.70
                                                              More Information
                                                              Availability: Stock
                                                              Simpson Strong-Tie Item #: TA10Z -

                                                                Simpson Strong-Tie TA10Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10Z angles are easily installed with (7) SDS25112 (1/4" x 1-1/2") screws or longer. Finish: ZMAX® coating Material: 12 Gauge Fasteners: SDS25112 Screws - (3) Stringer, (4) Tread Dimensions: 10-1/4" Length x 1-1/2" (Flange Width) TA10Z Information & Installation Instructions Corrosion Protection Information Z-Max G-185...

                                                                Simpson Strong-Tie A34 Framing Clip
                                                                Price: $44.00
                                                                More Information
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: A34ZBX -

                                                                  The Simpson Strong-Tie A34 Framing Clips for connecting wood to wood at a 90° angle. The ZMax finish provides additional corrosion resistance for applications that require it. Purchasing A34 clips by the box of 100 means extra savings to you. Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information & Installation Instructions Please Note: If there are any items on the Simpson website that you do not see on the DHC Supplies website we will gladly...

                                                                  Simpson Strong-Tie CJT Concealed Joist Ties
                                                                  Price: $23.25
                                                                  More Information
                                                                  Availability: Stock
                                                                  Simpson Strong-Tie Item #: CJT4L -

                                                                    The Simpson Strong-Tie CJT4L is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT4L long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 10 Glulam Beam - 5-1/8" x 9" Material: 12 Gauge Finish:...

                                                                    Simpson Strong-Tie DSC Drag Strut Connectors
                                                                    Price: $71.95
                                                                    More Information
                                                                    Availability: Stock
                                                                    Simpson Strong-Tie Item #: DSC5R -

                                                                      The DSC5R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. The DSC5R-SDS3 drag strut connectors requires 40% less fasteners than the DSC4R connector but gets 12% higher loads. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint-Level of Corrosion Resistance: Low Dimensions: 21" (Length) x 3" (Flanges) Included Fasteners: (24) SDS 1/4" x 3"...

                                                                      Simpson Strong-Tie STC/DTC Roof Truss Clips
                                                                      Price: $109.00
                                                                      More Information
                                                                      Availability: Stock
                                                                      Simpson Strong-Tie Item #: DTCBX -

                                                                        The Simpson Strong-Tie DTC Double Slotted Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The DTC has two 1-1/2" slots that will permit the truss chord to move vertically when loads are applied to the roof. The double slot increases the allowable load values. Save when purchased by the box of 100 pieces. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (6) 8d Nails STC Information and Installation Instructions ...

                                                                        Simpson Strong-Tie H1 Hurricane Clip
                                                                        Price: $66.30
                                                                        More Information
                                                                        Availability: Stock
                                                                        Simpson Strong-Tie Item #: H1ZBX -

                                                                          The Simpson Strong-Tie H1Z Hurricane Ties with Z-Max Corrosion Resistance are designed to provide a secure connection between a 2x rafter and the double top plate at the point where the rafter rests on the plate. Save on H1Z ties by purchasing in boxes of 100 pieces! Material: 18 Gauge Finish: Z-Max Fasteners - To Rafter: (6) 8d x 1-1/2" Nails Fasteners - To Double Top Plate: (4) 8d Nails H1Z Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc Coating:...

                                                                          Simpson Strong-Tie HL Series Heavy Angle
                                                                          Price: $12.79
                                                                          More Information
                                                                          Availability: Ships Direct
                                                                          Simpson Strong-Tie Item #: HL35HDG -

                                                                            Simpson Strong-Tie HL35HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized-Level of Corrosion Resistance: Medium Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 5" (L) Bolt Holes: (4)...

                                                                            Simpson Strong-Tie L Series Reinforcing Angle
                                                                            Price: $94.40
                                                                            More Information
                                                                            Availability: Stock
                                                                            Simpson Strong-Tie Item #: L50BX -

                                                                              The Simpson Strong-Tie L50 Reinforcing Angle are a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L50 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Save by purchasing by the box of 100 pieces Material: 16 Gauge Finish: Standard G90 Length: 5" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (6) 10d x 1-1/2" (6) SD #9 x 1-1/2" L50...

                                                                              Simpson Strong-Tie LS Series Skewable Angles
                                                                              Price: $62.50
                                                                              More Information
                                                                              Availability: Stock
                                                                              Simpson Strong-Tie Item #: LS30ZBX -

                                                                                The Simpson Strong-Tie LS30Z Skewable Reinforcing Angles with ZMax Protection Coating are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Save when you purchase by the box of 100 pieces! Material: 18 Gauge Finish: ZMax Coating Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x...

                                                                                Simpson Strong Tie TA10Z Staircase Angles
                                                                                Price: $172.50
                                                                                More Information
                                                                                Availability: Stock
                                                                                Simpson Strong-Tie Item #: TA10Z-50 -

                                                                                  Simpson Strong-Tie TA10Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10Z angles are easily installed with (7) SDS25112 (1/4" x 1-1/2") screws or longer. Save by purchasing by the box of 50 angles! Finish: ZMAX® coating Material: 12 Gauge Fasteners: SDS25112 Screws - (3) Stringer, (4) Tread Dimensions: 10-1/4" Length x 1-1/2" (Flange Width) TA10Z Information & Installation Instructions...

                                                                                  Simpson Strong-Tie A35 Framing Clip
                                                                                  Price: $0.31
                                                                                  More Information
                                                                                  Availability: Stock
                                                                                  Simpson Strong-Tie Item #: A35EA -

                                                                                    The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. Material: 18 Gauge Finish: Standard G90 Length: 4-1/2" Flange Widths: 1-7/16" Fasteners: (9-12) 8d x 1-1/2" (9-12) SD #9 x 1-1/2" A35 Information & Installation...

                                                                                    Simpson Strong-Tie CJT Concealed Joist Ties
                                                                                    Price: $26.75
                                                                                    More Information
                                                                                    Availability: Stock
                                                                                    Simpson Strong-Tie Item #: CJT5S -

                                                                                      The Simpson Strong-Tie CJT5S is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT5S short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 12 Glulam Beam - 3-1/8" x 10-1/2" PSL - 3-1/2 x...

                                                                                      Simpson Strong-Tie H2.5A Hurricane Tie
                                                                                      Price: $0.26
                                                                                      More Information
                                                                                      Availability: Stock
                                                                                      Simpson Strong-Tie Item #: H2.5AEA -

                                                                                        The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2" Screws H2.5A Information and Installation Instructions. Corrosion Coating Information...

                                                                                        Simpson Strong-Tie HL Series Heavy Angle
                                                                                        Price: $13.26
                                                                                        More Information
                                                                                        Availability: Ships Direct
                                                                                        Simpson Strong-Tie Item #: HL37 -

                                                                                          Simpson Strong-Tie HL37 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL37 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 7-1/2" (L) Bolt Holes: (6) 1/2" HL Heavy Angle Information and Installation Instructions. Please Note: If there are any items on the Simpson...

                                                                                          Simpson Strong-Tie L Series Reinforcing Angle
                                                                                          Price: $1.19
                                                                                          More Information
                                                                                          Availability: Stock
                                                                                          Simpson Strong-Tie Item #: L50ZEA -

                                                                                            The Simpson Strong-Tie L50Z Reinforcing Angle with Z-Max protection is a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L50 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Z-Max Coating Length: 5" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (6) 10d x 1-1/2" (6) SD #9 x 1-1/2" L50Z Information &...

                                                                                            Simpson Strong-Tie LS Series Skewable Angles
                                                                                            Price: $1.25
                                                                                            More Information
                                                                                            Availability: Stock
                                                                                            Simpson Strong-Tie Item #: LS50EA -

                                                                                              The Simpson Strong-Tie LS50 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS50 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Zinc Length: 4-7/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (8) 10d x 1-1/2" LS50 Information & Installation Instructions Corrosion Protection...

                                                                                              Simpson Strong-Tie A35 Framing Clip
                                                                                              Price: $28.50
                                                                                              More Information
                                                                                              Availability: Stock
                                                                                              Simpson Strong-Tie Item #: A35BX -

                                                                                                The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. Purchasing by the box of 100 provides additional savings. Material: 18 Gauge Finish: Standard G90 Length: 4-1/2" Flange Widths: 1-7/16" Fasteners: (9-12) 8d x 1-1/2"...

                                                                                                Simpson Strong-Tie CJT Concealed Joist Ties
                                                                                                Price: $26.75
                                                                                                More Information
                                                                                                Availability: Stock
                                                                                                Simpson Strong-Tie Item #: CJT5L -

                                                                                                  The Simpson Strong-Tie CJT5L is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT5L long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 12 Glulam Beam - 5-1/8" x 10-1/2" Material: 12 Gauge Finish:...

                                                                                                   
                                                                                                  DHC Supplies Payment Options DHC Supplies, Inc is an Upfront Merchant on TheFind. Click for info.

                                                                                                  Website prices are for online sales only. Individual branch prices may differ depending on the item, delivery method, and payment terms. Please contact your local DHC Supplies store for more information.

                                                                                                  For question regarding our service pledge and policies please visit our Service and Policy statement page.

                                                                                                  We know your security and privacy are important. Please view our Security and Privacy page for more details.

                                                                                                  Many data pages may require Adobe Acrobat® Reader® to view..

                                                                                                  Any trademarks used are the properties of their respective owners..

                                                                                                  Should you have any comments or concerns regarding this website please contact our webmaster.

                                                                                                  All information on this site is for informational purposes only and may not be up to date. We have provided additional information links on the product page whenever possible. Please refer to these links for confirmation of data provided. DHC Supplies, Inc. does not warrant any information provided by third parties..

                                                                                                  View Catalog Page

                                                                                                  © 2015 DHC Supplies, Inc.