Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999
Refine Search By Filter(s)

Products 1-48 of 52
Show
Simpson Strong-Tie HD3B Holdown Anchor
Simpson Strong-Tie

More Information

Price: $8.20
Availability: Stock
Simpson Strong-Tie Item #: HD3B -

    Simpson Strong-Tie HD3B Holdowns are a light duty bracket that is designed for a variety of uses including but not limited to shearwalls, braced-wall panels and other lateral applications. The holdown must be attached to the receiving member with 5/8" machine bolts. A minimum wood member thickness of 1-1/2" is required to reach the least allowable tension load. The bottom stud hole is 4-3/4" above the plate line so you can install the holdown flush with the plate without weakening the post or...

    Simpson Strong-Tie HDQ8 Heavy Duty Holdowns
    Simpson Strong-Tie

    More Information

    Price: $36.55
    Availability: Stock
    Simpson Strong-Tie Item #: HDQ8 -

      The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8 greatly minimizes deflection under load. (20) 3" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value. Material: 7 Gauge Steel...

      Simpson HDU2-SDS2.5 Holdown with SDS screws
      Simpson Strong-Tie

      More Information

      Price: $15.72
      Availability: Stock
      Simpson Strong-Tie Item #: HDU2 -

        Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...

        Simpson Strong-Tie S/HDU4 Holdown
        Simpson Strong-Tie

        More Information

        Price: $18.89
        Availability: Stock
        Simpson Strong-Tie Item #: S/HDU4 -

          The S/HDU4 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU4 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 5/8" Fasteners: (6) #14 Screws Height: 7-7/8"...

          Simpson Strong-Tie HD3B HDG Holdown Anchor
          Simpson Strong-Tie

          More Information

          Price: $10.77
          Availability: Ships Direct
          Simpson Strong-Tie Item #: HD3BHDG -

            Simpson Strong-Tie HD3BHDG Hot Dipped Galvanized Holdowns are a light duty bracket that is designed for a variety of uses including but not limited to shearwalls, braced-wall panels and other lateral applications. The holdown must be attached to the receiving member with 5/8" machine bolts. A minimum wood member thickness of 1-1/2" is required to reach the least allowable tension load. The bottom stud hole is 4-3/4" above the plate line so you can install the holdown flush with the plate...

            Simpson HDU2-SDS2.5 Holdown with SDS screws
            Simpson Strong-Tie

            More Information

            Price: $22.20
            Availability: Ships Direct
            Simpson Strong-Tie Item #: HDU2HDG -

              Simpson Strong-Tie HDU2-SDS2.5HDG Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in...

              Simpson Strong-Tie HHDQ11 Heavy Duty Holdowns
              Simpson Strong-Tie

              More Information

              Price: $84.06
              Availability: Stock
              Simpson Strong-Tie Item #: HHDQ11 -

                The Simpson Strong-Tie HDQ11-SDS2.5 holdown combines low deflection and high loads with ease of installation. (24) 2-1/2" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value. Material: 7 Gauge Steel Finish: Simpson Gray Paint Anchor Bolt Size: 1" Minimum Post Thickness:...

                Simpson Strong-Tie S/HDU6 Holdown
                Simpson Strong-Tie

                More Information

                Price: $19.06
                Availability: Stock
                Simpson Strong-Tie Item #: S/HDU6 -

                  The S/HDU6 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU6 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 5/8" Fasteners: (12) #14 Screws Height:...

                  Simpson Strong-Tie HD5B Holdown Anchor
                  Simpson Strong-Tie

                  More Information

                  Price: $17.93
                  Availability: Stock
                  Simpson Strong-Tie Item #: HD5B -

                    The Simpson Strong-Tie HD5B Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This is required so that the wood is not weakened from drilling too close to the end. However the anchor can still be installed raised above the sill plate if you desire. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. Base...

                    Simpson HDU4-SDS2.5 Holdown with SDS screws
                    Simpson Strong-Tie

                    More Information

                    Price: $18.62
                    Availability: Stock
                    Simpson Strong-Tie Item #: HDU4 -

                      Simpson Strong-Tie HDU4-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...

                      Simpson Strong-Tie HHDQ14 Heavy Duty Holdowns
                      Simpson Strong-Tie

                      More Information

                      Price: $89.19
                      Availability: Stock
                      Simpson Strong-Tie Item #: HHDQ14 -

                        The Simpson Strong-Tie HDQ14-SDS2.5 holdown combines low deflection and high loads with ease of installation. (30) 2-1/2" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value. Material: 7 Gauge Steel Finish: Simpson Gray Paint Anchor Bolt Size: 1" Minimum Post Thickness:...

                        Simpson Strong-Tie S/HDU9 Holdown
                        Simpson Strong-Tie

                        More Information

                        Price: $21.24
                        Availability: Stock
                        Simpson Strong-Tie Item #: S/HDU9 -

                          The S/HDU9 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU9 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 7/8" Fasteners: (18) #14 Screws Height:...

                          Simpson Strong-Tie HD5B Holdown Anchor
                          Simpson Strong-Tie

                          More Information

                          Price: $24.75
                          Availability: Ships Direct
                          Simpson Strong-Tie Item #: HD5BHDG -

                            The Simpson Strong-Tie HD5BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This is required so that the wood is not weakened from drilling too close to the end. However the anchor can still be installed raised above the sill plate if you desire. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral...

                            Simpson HDU4-SDS2.5 Holdown with SDS screws
                            Simpson Strong-Tie

                            More Information

                            Price: $25.00
                            Availability: Ships Direct
                            Simpson Strong-Tie Item #: HDU4HDG -

                              Simpson Strong-Tie HDU4-SDS2.5 Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (10) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in either...

                              Simpson Strong-Tie S/HDU11 Holdown
                              Simpson Strong-Tie

                              More Information

                              Price: $38.56
                              Availability: Stock
                              Simpson Strong-Tie Item #: S/HDU11 -

                                The S/HDU11 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU11 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 7/8" Fasteners: (27) #14 Screws Height:...

                                Simpson Strong-Tie HD7B Holdown Anchor
                                Simpson Strong-Tie

                                More Information

                                Price: $24.42
                                Availability: Stock
                                Simpson Strong-Tie Item #: HD7B -

                                  The Simpson Strong-Tie HD7B Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown uses the same design as the HDQ8-SDS2.5 holdown that is proven to greatly reduce deflection while under load. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. The HD7B must be connected to a minimum of 3" of material....

                                  Simpson HDU5-SDS2.5 Holdown with SDS screws
                                  Simpson Strong-Tie

                                  More Information

                                  Price: $21.86
                                  Availability: Stock
                                  Simpson Strong-Tie Item #: HDU5 -

                                    Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...

                                    Simpson Strong-Tie HD9B Holdown Anchor
                                    Simpson Strong-Tie

                                    More Information

                                    Price: $29.88
                                    Availability: Stock
                                    Simpson Strong-Tie Item #: HD9B -

                                      The Simpson Strong-Tie HD9B Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown uses the same design as the HDQ8-SDS2.5 holdown that is proven to greatly reduce deflection while under load. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. The HD9B must be connected to a minimum of 3-1/2" of...

                                      Simpson HDU5-SDS2.5 Holdown with SDS screws
                                      Simpson Strong-Tie

                                      More Information

                                      Price: $30.39
                                      Availability: Ships Direct
                                      Simpson Strong-Tie Item #: HDU5HDG -

                                        Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in either exterior or in...

                                        Simpson Strong-Tie HD12 Holdown Anchor
                                        Simpson Strong-Tie

                                        More Information

                                        Price: $54.62
                                        Availability: Stock
                                        Simpson Strong-Tie Item #: HD12 -

                                          The Simpson Strong-Tie HD12 Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown can obtain a wide variety of allowable tension loads depending on the thickness of the posts and the anchor bolt used. The HD12 must be connected to a minimum of 3-1/2" of material. Base Material: 3/8" Steel Body Material: 3 Gauge Steel Finish: Simpson Gray Paint Stud Bolts: (4) 1" Anchor Bolt Diameter: 1" or 1-1/8"...

                                          Simpson HDU8-SDS2.5 Holdown with SDS screws
                                          Simpson Strong-Tie

                                          More Information

                                          Price: $31.16
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: HDU8 -

                                            Simpson Strong-Tie HDU8-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (20) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 7/8" Pre-deflected...

                                            Simpson Strong-Tie HD19 Holdown Anchor
                                            Simpson Strong-Tie

                                            More Information

                                            Price: $80.23
                                            Availability: Stock
                                            Simpson Strong-Tie Item #: HD19 -

                                              The Simpson Strong-Tie HD19 Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This holdown can obtain a wide variety of allowable tension loads depending on the thickness of the posts and the anchor bolt used. The HD19 must be connected to a minimum of 5-1/2" of material. Base Material: 3/8" Steel Body Material: 3 Gauge Steel Finish: Simpson Gray Paint Stud Bolts: (5) 1" Anchor Bolt Diameter: 1-1/8" or...

                                              Simpson HDU8-SDS2.5HDG Holdown with SDS screws
                                              Simpson Strong-Tie

                                              More Information

                                              Price: $46.09
                                              Availability: Stock
                                              Simpson Strong-Tie Item #: HDU8HDG -

                                                Simpson Strong-Tie HDU8-SDS2.5HDG Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (20) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in...

                                                Simpson Strong Tie DTT1Z Deck Ties
                                                Simpson Strong-Tie

                                                More Information

                                                Price: $1.87
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: DTT1Z -

                                                  The Simpson Strong-Tie DTT1Z deck tension tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie addresses a 2015 International Residential Code provision (section R507.2.4) that now allows four 750 lb. lateral connectors to be fastened to framing in the house with a lag screw. This provision is an alternative to using two 1,500 lb. lateral connections from the deck to the floor joists within the...

                                                  Simpson HDU11-SDS2.5 Holdown with SDS screws
                                                  Simpson Strong-Tie

                                                  More Information

                                                  Price: $38.00
                                                  Availability: Stock
                                                  Simpson Strong-Tie Item #: HDU11 -

                                                    Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 1" Pre-deflected...

                                                    Simpson Strong Tie DTT1Z Deck Ties
                                                    Simpson Strong-Tie

                                                    More Information

                                                    Price: $69.60
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: DTT1ZBX -

                                                      The Simpson Strong-Tie DTT1Z deck tension tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie addresses a 2015 International Residential Code provision (section R507.2.4) that now allows four 750 lb. lateral connectors to be fastened to framing in the house with a lag screw. This provision is an alternative to using two 1,500 lb. lateral connections from the deck to the floor joists within the...

                                                      Simpson HDU14-SDS2.5 Holdown with SDS screws
                                                      Simpson Strong-Tie

                                                      More Information

                                                      Price: $44.39
                                                      Availability: Stock
                                                      Simpson Strong-Tie Item #: HDU14 -

                                                        Simpson Strong-Tie HDU14-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (36) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 7 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 1" Pre-deflected...

                                                        Simpson Strong Tie DTT1Z-KT Deck Tie Connector Kit
                                                        Simpson Strong-Tie

                                                        More Information

                                                        Price: $25.65
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: DTT1Z-KT -

                                                          The Simpson Strong-Tie DTT1Z deck tension tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie addresses a 2015 International Residential Code provision (section R507.2.4) that now allows four 750 lb. lateral connectors to be fastened to framing in the house with a lag screw. This provision is an alternative to using two 1,500 lb. lateral connections from the deck to the floor joists within the...

                                                          Simpson Strong Tie DTT1Z-KT Deck Tie Connector Kit
                                                          Simpson Strong-Tie

                                                          More Information

                                                          Price: $95.60
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: DTT1Z-KTBX -

                                                            The Simpson Strong-Tie DTT1Z deck tension tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie addresses a 2015 International Residential Code provision (section R507.2.4) that now allows four 750 lb. lateral connectors to be fastened to framing in the house with a lag screw. This provision is an alternative to using two 1,500 lb. lateral connections from the deck to the floor joists within the...

                                                            Simpson Strong Tie DTT2Z Deck Post Connectors
                                                            Simpson Strong-Tie

                                                            More Information

                                                            Price: $6.84
                                                            Availability: Stock
                                                            Simpson Strong-Tie Item #: DTT2Z -

                                                              The Simpson Strong-Tie DTT2Z ZMax® Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the deck to the house....

                                                              Simpson Strong Tie DTT2Z Deck Post Connectors
                                                              Simpson Strong-Tie

                                                              More Information

                                                              Price: $129.40
                                                              Availability: Stock
                                                              Simpson Strong-Tie Item #: DTT2ZBX -

                                                                The Simpson Strong-Tie DTT2Z ZMax® Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the deck to the house....

                                                                Simpson Strong Tie DTT2Z Deck Post Connectors
                                                                Simpson Strong-Tie

                                                                More Information

                                                                Price: $7.34
                                                                Availability: Ships Direct
                                                                Simpson Strong-Tie Item #: DTT2Z-SDS2.5 -

                                                                  The Simpson Strong-Tie DTT2Z-SDS2.5 ZMax® Tension Tie with 2-1/2" Screws is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the...

                                                                  Simpson Strong Tie DTT2Z Deck Post Connectors
                                                                  Simpson Strong-Tie

                                                                  More Information

                                                                  Price: $139.00
                                                                  Availability: Ships Direct
                                                                  Simpson Strong-Tie Item #: DTT2Z-SDS2.5BX -

                                                                    The Simpson Strong-Tie DTT2Z-SDS2.5 ZMax® Tension Tie with 2-1/2" Screws is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the...

                                                                    Simpson Strong Tie DTT2SS Deck Post Connectors
                                                                    Simpson Strong-Tie

                                                                    More Information

                                                                    Price: $20.37
                                                                    Availability: Ships Direct
                                                                    Simpson Strong-Tie Item #: DTT2SS -

                                                                      The Simpson Strong-Tie DTT2SS Type 316L Stainless Steel Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2SS also complies with the new IRC requirements for laterally tying the deck to...

                                                                      Simpson Strong Tie DTT2SS Deck Post Connectors
                                                                      Simpson Strong-Tie

                                                                      More Information

                                                                      Price: $75.92
                                                                      Availability: Ships Direct
                                                                      Simpson Strong-Tie Item #: DTT2SSBX -

                                                                        The Simpson Strong-Tie DTT2SS Type 316L Stainless Steel Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2SS also complies with the new IRC requirements for laterally tying the deck to...

                                                                        Simpson LTT19 Tension Ties
                                                                        Simpson Strong-Tie

                                                                        More Information

                                                                        Price: $11.44
                                                                        Availability: Ships Direct
                                                                        Simpson Strong-Tie Item #: LTT19 -

                                                                          The LTT19 Light Tension Tie is designed to use with 2x purlins or joists. There are three anchor bolt options, 1/2", 5/8" or 3/4" diameter. If you are using the 1/2" or 5/8" anchor bolt option you must also install a cut washer under the anchor nut. Simpson Strong-Tie Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 16 Gauge Plate Material: 3 Gauge Finish: Standard G90 Galvanized Width: 1-3/4" Length: 19-1/8" Anchor Bolt: 1/2", 5/8" or 3/4"...

                                                                          Simpson LTT19 Tension Ties
                                                                          Simpson Strong-Tie

                                                                          More Information

                                                                          Price: $106.60
                                                                          Availability: Ships Direct
                                                                          Simpson Strong-Tie Item #: LTT19BX -

                                                                            The LTT19 Light Tension Tie is designed to use with 2x purlins or joists. There are three anchor bolt options, 1/2", 5/8" or 3/4" diameter. If you are using the 1/2" or 5/8" anchor bolt option you must also install a cut washer under the anchor nut. Simpson Strong-Tie Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 16 Gauge Plate Material: 3 Gauge Finish: Standard G90 Galvanized Width: 1-3/4" Length: 19-1/8" Anchor Bolt: 1/2", 5/8" or 3/4"...

                                                                            Simpson LTT20B Tension Ties
                                                                            Simpson Strong-Tie

                                                                            More Information

                                                                            Price: $13.07
                                                                            Availability: Stock
                                                                            Simpson Strong-Tie Item #: LTT20B -

                                                                              The Simpson Strong-Tie LTT20B Light Tension Tie is designed for both nail and bolt-on applications . There are three anchor bolt options, 1/2", 5/8" or 3/4" diameter. If you are using the 1/2" or 5/8" anchor bolt option you must also install a cut washer under the anchor nut. Simpson Strong-Tie Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 12 Gauge Plate Material: 3 Gauge Finish: Standard G90 Galvanized Width: 2" Length: 19-3/4" Anchor...

                                                                              Simpson LTT20B Tension Ties
                                                                              Simpson Strong-Tie

                                                                              More Information

                                                                              Price: $121.80
                                                                              Availability: Stock
                                                                              Simpson Strong-Tie Item #: LTT20BBX -

                                                                                The Simpson Strong-Tie LTT20B Light Tension Tie is designed for both nail and bolt-on applications . There are three anchor bolt options, 1/2", 5/8" or 3/4" diameter. If you are using the 1/2" or 5/8" anchor bolt option you must also install a cut washer under the anchor nut. Simpson Strong-Tie Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 12 Gauge Plate Material: 3 Gauge Finish: Standard G90 Galvanized Width: 2" Length: 19-3/4" Anchor...

                                                                                Simpson LTTI31 Tension Ties
                                                                                Simpson Strong-Tie

                                                                                More Information

                                                                                Price: $41.83
                                                                                Availability: Ships Direct
                                                                                Simpson Strong-Tie Item #: LTTI31 -

                                                                                  The Simpson Strong-Tie LTTI31 Light Tension Tie is designed to attach wood chord open wen trusses to concrete or masonry walls. The may also be installed vertically as long as they are attached to a minimum 2 x 6 stud. If the base of the LTTI31 tie is flush with the concrete or masonry wall the allowable tension load increases (use link below for more information). Strap Material: 18 Gauge Plate Material: 3 Gauge Finish: Standard G90 Zinc Width: 3-3/4" Length: 31" Anchor Bolt: 5/8" Fastener...

                                                                                  Simpson HTT4 Tension Ties
                                                                                  Simpson Strong-Tie

                                                                                  More Information

                                                                                  Price: $12.91
                                                                                  Availability: Stock
                                                                                  Simpson Strong-Tie Item #: HTT4 -

                                                                                    The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc Width: 2-1/2" Length: 12-3/8" Anchor Bolt: 5/8" Fastener...

                                                                                    Simpson HTT4 Tension Ties
                                                                                    Simpson Strong-Tie

                                                                                    More Information

                                                                                    Price: $120.30
                                                                                    Availability: Stock
                                                                                    Simpson Strong-Tie Item #: HTT4BX -

                                                                                      The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc Width: 2-1/2" Length: 12-3/8" Anchor Bolt: 5/8" Fastener...

                                                                                      Simpson HTT4HDG Hot Dipped Galvanized Tension Ties
                                                                                      Simpson Strong-Tie

                                                                                      More Information

                                                                                      Price: $20.63
                                                                                      Availability: Ships Direct
                                                                                      Simpson Strong-Tie Item #: HTT4HDG -

                                                                                        The Simpson Strong-Tie HTT4HDG Hot Dipped Galvanized Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. Hot dipped galvanizing provides added protection when install hardware to ACQ lumber. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4HDG Tension Ties are designed to be used in both in vertical and horizontal...

                                                                                        Simpson HTT4HDG Hot Dipped Galvanized Tension Ties
                                                                                        Simpson Strong-Tie

                                                                                        More Information

                                                                                        Price: $192.20
                                                                                        Availability: Ships Direct
                                                                                        Simpson Strong-Tie Item #: HTT4HDGBX -

                                                                                          The Simpson Strong-Tie HTT4HDG Hot Dipped Galvanized Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. Hot dipped galvanizing provides added protection when install hardware to ACQ lumber. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4HDG Tension Ties are designed to be used in both in vertical and horizontal...

                                                                                          Simpson HTT5 Tension Ties
                                                                                          Simpson Strong-Tie

                                                                                          More Information

                                                                                          Price: $16.03
                                                                                          Availability: Stock
                                                                                          Simpson Strong-Tie Item #: HTT5 -

                                                                                            The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Using a BP58-2 bearing plate installed in the seat of the HTT5 provides add more allowable tension load to the connection. HTT5 Tension Ties are designed to be used in both in vertical and...

                                                                                            Simpson HTT5 Tension Ties
                                                                                            Simpson Strong-Tie

                                                                                            More Information

                                                                                            Price: $149.50
                                                                                            Availability: Stock
                                                                                            Simpson Strong-Tie Item #: HTT5BX -

                                                                                              The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Using a BP58-2 bearing plate installed in the seat of the HTT5 provides add more allowable tension load to the connection. HTT5 Tension Ties are designed to be used in both in vertical and...

                                                                                              Simpson HTT5 Tension Ties
                                                                                              Simpson Strong-Tie

                                                                                              More Information

                                                                                              Price: $16.03
                                                                                              Availability: Ships Direct
                                                                                              Simpson Strong-Tie Item #: HTT5-3/4 -

                                                                                                The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard...

                                                                                                Simpson HTT5 Tension Ties
                                                                                                Simpson Strong-Tie

                                                                                                More Information

                                                                                                Price: $149.50
                                                                                                Availability: Ships Direct
                                                                                                Simpson Strong-Tie Item #: HTT5-3/4BX -

                                                                                                  The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard...