Login      View Cart   Checkout   Wish List
Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Simpson Strong Tie SB Sweep Anchor Bolt
Availability: Stock
Simpson Strong-Tie Item #: SB5/8x24 -

    The geometry of the SB5/8x24 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 6" wide concrete stem wall without creating excessive horizontal forces. The SB5/8x24 is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled thread for higher tensile capacity...

    Simpson Strong Tie MASA Mudsill Anchor
    Availability: Ships Direct
    Simpson Strong-Tie Item #: MASA -

      Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASA version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish around No labor costs involved in drilling plates and...

      Simpson Strong Tie SB Sweep Anchor Bolt
      Availability: Ships Direct
      Simpson Strong-Tie Item #: SB5/8x24HDG -

        The geometry of the SB5/8x24HDG Hot Dipped Galvanized 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 6" wide concrete stem wall without creating excessive horizontal forces. The SB5/8x24 is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled thread for...

        Simpson Strong Tie MASA Mudsill Anchor
        Availability: Ships Direct
        Simpson Strong-Tie Item #: MASA-50 -

          Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASA version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish around No labor costs involved in drilling plates and...

          Simpson Strong Tie SSTB Anchor Bolts
          Availability: Stock
          Simpson Strong-Tie Item #: SSTB16 -

            The SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

            Simpson Strong Tie SB Sweep Anchor Bolt
            Availability: Stock
            Simpson Strong-Tie Item #: SB7/8x24 -

              The geometry of the SB7/8x24 7/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB7/8x24 is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled thread for higher tensile capacity...

              Simpson Strong Tie MASA Mudsill Anchor
              Availability: Ships Direct
              Simpson Strong-Tie Item #: MASAZ -

                Simpson Strong-Tie MASAZ ZMax® anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAZ version is used for installation on standards forms. Zmax® Galvanized (G185) with a minimum of 1.85 oz. of zinc per square foot of surface area (hot-dip galvanized per ASTM A653 total both sides). Zmax®...

                Simpson SSTB Anchor Bolts
                Availability: Stock
                Simpson Strong-Tie Item #: SSTB16L -

                  The SSTB16L (5/8" Diameter by 19-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                  Simpson Strong-Tie Coupling Nut with Witness Hole
                  Availability: Stock
                  Simpson Strong-Tie Item #: CNW58 -

                    Simpson Strong-Tie CNW5/8 coupling nuts are a tested and load rated method to join 5/8" threaded rod and 5/8" anchor bolts. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW5/8 meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. Minimum Overall Length: 1-7/8" CNW5/8 Information and Data ...

                    Simpson Strong Tie SB Sweep Anchor Bolt
                    Availability: Ships Direct
                    Simpson Strong-Tie Item #: SB7/8x24HDG -

                      The geometry of the SB7/8x24HDG 7/8" x 24" Hot Dipped Galvanized anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB7/8x24HDG is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled thread for...

                      Simpson Strong Tie MASA Mudsill Anchor
                      Availability: Ships Direct
                      Simpson Strong-Tie Item #: MASAZ-50 -

                        Simpson Strong-Tie MASAZ ZMax® anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAZ version is used for installation on standards forms. Zmax® Galvanized (G185) with a minimum of 1.85 oz. of zinc per square foot of surface area (hot-dip galvanized per ASTM A653 total both sides). Zmax®...

                        Simpson Strong Tie SSTB Anchor Bolts
                        Availability: Stock
                        Simpson Strong-Tie Item #: SSTB16HDG -

                          The SSTB16HDG Hot Dipped Galvanized (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment...

                          Simpson Strong Tie SB Sweep Anchor Bolt
                          Availability: Stock
                          Simpson Strong-Tie Item #: SB1X30 -

                            The geometry of the SB1x30 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB1x30 with a minimum embedment of 24" is intended to cover holdown devices that exceed the capacity of SSTB anchors. Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled...

                            Simpson Strong Tie MASAP Mudsill Anchor
                            Availability: Ships Direct
                            Simpson Strong-Tie Item #: MASAP -

                              Simpson Strong-Tie MASAP anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAP is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAP version is used for installation on panelized forms. Attaches easily to the concrete form for quick installation Lays flat on the panelized form so there is no anchor bolt to finish around No labor costs involved in drilling...

                              Simpson Strong Tie SSTB Anchor Bolts
                              Availability: Stock
                              Simpson Strong-Tie Item #: SSTB20 -

                                The SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                                Simpson Strong Tie SB Sweep Anchor Bolt
                                Availability: Ships Direct
                                Simpson Strong-Tie Item #: SB1X30HDG -

                                  The geometry of the SB1x30HDG Hot Dipped Galvanized 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB1x30HDG with a minimum embedment of 24" is intended to cover holdown devices that exceed the capacity of SSTB anchors. Identification on the bolt head showing embedment angle and model...

                                  Simpson Strong Tie MASAP Mudsill Anchor
                                  Availability: Ships Direct
                                  Simpson Strong-Tie Item #: MASAP-50 -

                                    Simpson Strong-Tie MASAP anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAP is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAP version is used for installation on panelized forms. Attaches easily to the concrete form for quick installation Lays flat on the panelized form so there is no anchor bolt to finish around No labor costs involved in drilling...

                                    Simpson Strong Tie SSTB Anchor Bolts
                                    Availability: Stock
                                    Simpson Strong-Tie Item #: SSTB20L -

                                      The SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                                      Simpson Strong-Tie Coupling Nut with Witness Hole
                                      Availability: Stock
                                      Simpson Strong-Tie Item #: CNW34 -

                                        Simpson Strong-Tie CNW3/4 coupling nuts are a tested and load rated method to join 3/4" threaded rod and 3/4" anchor bolts. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW3/4 meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. Minimum Overall Length: 2-1/4" CNW3/4 Information and Data ...

                                        Simpson Strong Tie MASAP Mudsill Anchor
                                        Availability: Ships Direct
                                        Simpson Strong-Tie Item #: MASAPZ -

                                          Simpson Strong-Tie MASAPZ ZMaz®anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAPZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAPZ version is used for installation on panelized forms. This anchor featured ZMax® coating when additional corrosion resistance is needed. Attaches easily to the concrete form for quick installation Lays flat on the...

                                          Simpson Strong Tie SSTB Anchor Bolts
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: SSTB20HDG -

                                            The SSTB20HDG Hot Dipped Galvanized (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment...

                                            Simpson Strong Tie MASAP Mudsill Anchor
                                            Availability: Ships Direct
                                            Simpson Strong-Tie Item #: MASAPZ-50 -

                                              Simpson Strong-Tie MASAPZ ZMaz®anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAPZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAPZ version is used for installation on panelized forms. This anchor featured ZMax® coating when additional corrosion resistance is needed. Attaches easily to the concrete form for quick installation Lays flat on the...

                                              Simpson Strong Tie SSTB Anchor Bolts
                                              Availability: Stock
                                              Simpson Strong-Tie Item #: SSTB24 -

                                                The SSTB24 (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                                                Simpson Strong Tie SSTB Anchor Bolts
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: SSTB24L -

                                                  The SSTB24L (5/8" Diameter by 28-1/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                                                  Simpson Strong-Tie Coupling Nut with Witness Hole
                                                  Availability: Ships Direct
                                                  Simpson Strong-Tie Item #: CNW78 -

                                                    Simpson Strong-Tie CNW7/8 coupling nuts are a tested and load rated method to join 7/8" threaded rod and 7/8" anchor bolts. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW7/8 meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. Minimum Overall Length: 2-1/2" CNW7/8 Information and Data ...

                                                    Simpson Strong Tie SSTB Anchor Bolts
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: SSTB24HDG -

                                                      The SSTB24HDG Hot Dipped Galvanized (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment...

                                                      Simpson Strong Tie SSTB Anchor Bolts
                                                      Availability: Stock
                                                      Simpson Strong-Tie Item #: SSTB28 -

                                                        The SSTB28 (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                                                        Simpson Strong Tie SSTB Anchor Bolts
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: SSTB28L -

                                                          The SSTB28L (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                                                          Simpson Strong Tie SSTB Anchor Bolts
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: SSTB28HDG -

                                                            The SSTB28HDG Hot Dipped Galvanized (7/8" Diameter by 29-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment...

                                                            Simpson Strong-Tie Coupling Nut with Witness Hole
                                                            Availability: Ships Direct
                                                            Simpson Strong-Tie Item #: CNW1 -

                                                              Simpson Strong-Tie CNW1 coupling nuts are a tested and load rated method to join 1" threaded rod and 1" anchor bolts. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW1 meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. Minimum Overall Length: 2-3/4" CNW1 Information and Data ...

                                                              Simpson Strong Tie SSTB Anchor Bolts
                                                              Availability: Stock
                                                              Simpson Strong-Tie Item #: SSTB34 -

                                                                The SSTB34 (7/8" Diameter by 34-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....

                                                                Simpson Strong Tie SSTB Anchor Bolts
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: SSTB36 -

                                                                  The SSTB36 (7/8" Diameter by 36-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Rolled threads for higher tensile capacity. Offset angle reduces side-bursting, provides more concrete cover. Stamped embedment line aids installation....