Login      View Cart   Checkout   Wish List
Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Hitachi 725397 Jig Saw Hardiblades 3/Pack
Availability: Stock
Hitachi Tools Item #: 725397 -

    Fast, coarse cutting of abrasive materials use on fiberglass-reinforced plastic, cement bonded particle board, and fiber cement Carbide-tipped 4-inch length; 6 teeth per inch on cutting side 3-pack "Jig saws equipped with a fiber-cement cutting blade may be used to cut service openings, curves, radii, scrollwork, and other irregular shapes in James Hardie� products. Because most jig saws are not equipped with dust collection capabilities, these tools also should only be used outdoors in...

    DIABLO DHS14SGP 14-Piece Hole Saw Kit
    Availability: Stock
    Diablo Tools Item #: DHS14SGP -

      One Mandrel Fits All Sizes! The Diablo DHS14SGP 14-Piece Hole Saw Kit features many of the smaller and medium diameter new, high performance hole saws that delivers faster cutting performance and increased productivity. Diablo Tool's hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and Variable Tooth Design for...

      DIABLO DHS09SGP 9-Piece Hole Saw Kit
      Availability: Stock
      Diablo Tools Item #: DHS09SGP -

        One Mandrel Fits All Sizes! The Diablo DHS09SGP 9-Piece Hole Saw Kit features many of the smaller diameter new, high performance hole saws that delivers faster cutting performance and increased productivity. Diablo Tool's hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and Variable Tooth Design for faster cuts....

        Diablo DS0606CW Carbide Demo Demon Reciprocating Saw Blade 6" x 6TPI
        Availability: Stock
        Diablo Tools Item #: DS0606CWS -

          For Cutting Wood, Wood Composites & Nail Embedded Wood The New Diablo DS0606CW Carbide Demo Demon Reciprocating Saw Blade 6" x 6TPI is the most innovative blade on the market, delivering break-through 10x performance than standard blades. The unique feature combination of carbide teeth, friction-reducing coating and high performance tooth design, provides users with never-seen-before performance and ease of use. New Variable Tooth Design provides faster cuts with less vibration in...

          Driltec SDS-MAX Bit - Bionic Cutter
          Retail: $67.50
          Availability: Stock
          Driltec, Inc Item #: SM045045 -

            The Driltec SM-045-045 1/2" x 10-3/4" x 17-1/2" Carbide SDS-Max Bit with a Bionic® Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC® drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

            701 Single Spur Auger Bit
            Availability: Stock
            Mag-Bit Item #: 701.0816 -

              The Mag-Bit 701.0816 1/2" x 7-7/8" Single Spur Short Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. The shorter length of the Mag-Bit 701 series allows you to get into tighter spaces like between wall studs. Additional Short Auger Information Auger Technical Information ...

              Exchange-A-Blade 2070012 3/4" Wood Flush Oscillating Blade
              Availability: Stock
              Exchange-A-Blade Item #: 2070012 -

                The Exchange-A-Blade 2070012 3/4" Wood Flush Cut Blade cuts up to 1-1/4" in depth. This blade is recommended for wood but also can be used to cut plastic, drywall and other soft materials. The universal arbor means this blade can be used in most tools on the market including: Dremel®, Fein®, Ridgid®, Bosch®, Milwaukee®, Stanley FatMax®, Porter-Cable®, Rockwell®, Sonictool (SS5120), Skil®, Craftsman®, Mastercraft®, King®, Genesis®,...

                DIABLO DHSAR375 3/8" HEX ARBOR
                Availability: Stock
                Diablo Tools Item #: DHSAR375 -

                  One Mandrel Fits All Sizes! The Diablo DHSAR375 3/8" HEX Arbor with Bit & Nuts is part of Diablo’s new, high performance hole saws system that delivers faster cutting performance and increased productivity. Diablo Tool's hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and Variable Tooth Design for faster cuts....

                  Mag-Bit 710 Single Spur Long Auger Bit
                  Availability: Stock
                  Mag-Bit Item #: 710.0616 -

                    The Mag-Bit 710.0616 3/8" x 18" Single Spur Long Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. This bit will drill fast and clean through wood but should not be used if you are going to hit nails or metal. Additional Long Auger Information Auger Technical Information ...

                    Driltec 3/8" x 4" x 10" Spline Shank Bit - Bionic Cutter
                    Retail: $44.82
                    Availability: Stock
                    Driltec, Inc Item #: AE050131 -

                      The Driltec AE-050-131 3/8" x 4" x 10" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and performance....

                      Relton Rebar Eater Concrete Bit
                      Retail: $47.00
                      Availability: Ships Direct
                      Relton Item #: RB-6 -

                        Relton 3/8" x 8" RB-6 Rotary-Only Rebar Eater Bit are the answer to drilling 3/8" holes through concrete-embedded rebar! No more broken or shattered hammer bits. You can now you can drill through the rebar and not have to relocate the hole to avoid the rebar! Suggested RPM's: 850-1200 Rebar Eater Brochure Watch The Demo ...

                        Makita 724114-A Super Thin Metal Cut-Off Wheel
                        Availability: Stock
                        Makita Item #: 724114-A -

                          The Makita 4" x 3/64" x 5/8" 724114-A Super Thin Metal Cut-Off Wheels are ideal for cutting various types of metals quickly and cleanly when on the jobsite or in the shop. The blade is thin so you will always get a relatively clean cut. A46 Grit 15,280 Max RPM

                          Diamond Products #90193 7" X 5/8-11 Star Blue Turbo Diamond Cup Grinders
                          Retail: $95.00
                          Availability: Stock
                          Diamond Products Item #: 90079 -

                            The Diamond Product #90079 4-1/2" X 5/8-11 Star Blue Spiral Turbo Diamond Cup Grinders has 12 grinding segments for grinding of concrete and other materials. General Grinding and Removal Spiral Turbo For A Fast Grind Diamond/Blade Quality Delux-Cut: Basic Quality Diamond/Economical Cutting Value Star Blue: Good Quality Diamond/Good Cutting Value Standard Gold: Better Quality Diamond/Better Cutting Value Imperial Purple: Better Quality Diamond/Very Good Cutting Value ...

                            Driltec 5/32" x 2" x 4-1/4" SDS-Plus Bit - Bionic Cutter
                            Availability: Stock
                            Driltec, Inc Item #: AD400219 -

                              The Driltec AD-400-219 5/32" x 2" (Usable Length) x 4-1/4" SDS-Plus Bit with Bionic Cutter features sharper cutting edges, with two center points for faster and more accurate drilling. Driltec SDS-Plus bits are ideal for small and fast drilling jobs in concrete and masonry. Driltec SDS-Plus Bits emphasize ergonomics and operator convenience to reduce the impact of hand-arm vibrations associated with the use of electric rotary hammers. Unique concave carbide tip design, accelerates drilling...

                              Mag-Bit 780 Bell Hanger Bit
                              Availability: Stock
                              Mag-Bit Item #: 786.18.1016 -

                                The Mag-Bit 786.18.1016 5/8" x 18" Bell Hanger Bits are made of high carbon steel for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling. This bit also works well for drilling through wood when you will also be hitting some metal such as when drilling column caps. Mag-Bit Website Additional Bell Hanger Information ...

                                Diablo DS0608BFD 6" x 8/10 TPI Demolition Blade
                                Availability: Stock
                                Diablo Tools Item #: DS0608BFD -

                                  For Metal Demolition (1/8" to 1/2") The Diablo DS0608BFD STEEL DEMON® Bi-Metal Reciprocating Blade 6" x 10-18 TPI delivers 4x the performance of standard blades. These are the first Dual Tooth Design Bi-Metal blades with Perma-SHIELD® Non-Stick coating and an Ultra-Hardened cutting edge with hardness to HRC62 for maximum durability and speed. Application: Metal Demolition (1/8" to 1/2") Length: 6" Teeth Per Inch (TPI): 8-10 Teeth: Bi-Metal Ultra Edge Tooth Design: Dual Tooth Please...

                                  Freud Diablo D0624A 6-1/2" Carbide Framing Saw Blades
                                  Availability: Stock
                                  Diablo Tools Item #: D0624A -

                                    Ideal for General Construction Applications, including fast, efficient ripping and crosscutting The Freud Diablo D0624A Framing Blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and frames more...

                                    Driltec SDS-Plus Ratio Adapter
                                    Availability: Stock
                                    Driltec, Inc Item #: RA-030-030 -

                                      Each Driltec RebarCutter™ Carbide Bit is used in the hammer mode of an SDS-Plus rotary hammer. This RA-030-030 SDS-Plus adapter accepts the male thread of the Driltec RebarCutter™ to complete the system.

                                      Diablo DS0606CWS Carbide Demo Demon Reciprocating Saw Blade 6" x 6TPI
                                      Availability: Stock
                                      Diablo Tools Item #: DS0606CWS3 -

                                        For Cutting Wood, Wood Composites & Nail Embedded Wood The New Diablo DS0606CWS3 (3-Pack) Carbide Demo Demon Reciprocating Saw Blade 6" x 6TPI is the most innovative blade on the market, delivering break-through 10x performance than standard blades. The unique feature combination of carbide teeth, friction-reducing coating and high performance tooth design, provides users with never-seen-before performance and ease of use. Three blades per pack New Variable Tooth Design provides faster...

                                        Exchange-A-Blade 2070022 1-1/4" Wood Flush Oscillating Blade
                                        Availability: Stock
                                        Exchange-A-Blade Item #: 2070022 -

                                          The Exchange-A-Blade 2070022 1-1/4" Wood Flush Cut Blade cuts up to 1-1/2" in depth. This blade is recommended for wood but also can be used to cut plastic, drywall and other soft materials.The universal arbor means this blade can be used in most tools on the market including: Dremel�, Fein�, Ridgid�, Bosch�, Milwaukee�, Stanley FatMax�, Porter-Cable�, Rockwell�, Sonictool (SS5120), Skil�, Craftsman�, Mastercraft�, King�, Genesis�, Haussmann�, Chicago Electric�, Makita� and more. Some tools...

                                          Driltec SDS-MAX Bit - Bionic Cutter
                                          Availability: Stock
                                          Driltec, Inc Item #: SM060060 -

                                            The Driltec SM-060-060 1/2" x 15-1/4" x 21-1/2" Carbide SDS-Max Bit with a Bionic® Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC® drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

                                            Mag-Bit 710 Single Spur 18" Long Wood Auger Bit
                                            Availability: Stock
                                            Mag-Bit Item #: 710.0816 -

                                              The Mag-Bit 710.0816 1/2" x 18" Single Spur Long Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. This bit will drill fast and clean through wood but should not be used if you are going to hit nails or metal. Additional Long Auger Information Auger Technical Information ...

                                              Driltec Ratio Rebar Cutter System
                                              Availability: Stock
                                              Driltec, Inc Item #: RL-050-190 -

                                                The RL-050-190 Driltec 1/2" X 7-1/2" (useable length) x 9" Ratio Rebar Cutter Bit is used with an SDS-Plus rotary hammer for drilling through rebar embedded in concrete or masonry. This bit is used in the hammer mode so it not only drills the rebar but chips it away. This creates a faster drilling process. With the Driltec uniquely durable and aggressive carbide tips you save time and money in labor and replacement costs. Note: SDS-Plus Adapter is not included. It must be purchased separately...

                                                Driltec 3/8" x 4" x 10" Spline Shank Bit - Bionic Cutter
                                                Retail: $60.55
                                                Availability: Stock
                                                Driltec, Inc Item #: AE070133 -

                                                  The Driltec AE-070-133 1/2" x 9-1/2" x 16" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

                                                  Diablo DHS4BIT 1/4" Pilot Bit
                                                  Availability: Stock
                                                  Diablo Tools Item #: DHS4BIT -

                                                    One Mandrel Fits All Sizes! The Diablo DHS4BIT 1/4" Pilot Bit is part of Diablo’s new, high performance hole saws system that delivers faster cutting performance and increased productivity. Diablo Tool's hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and Variable Tooth Design for faster cuts. Please Note: Diablo...

                                                    Lenox Leader Self Feed Bits
                                                    Availability: Stock
                                                    Lenox Saw Item #: LL225 -

                                                      The Lenox��_ Leader��_ LL225 2-1/4" Self Feed Bits with their precision ground teeth and outside diameter threads are designed for automatic feeding. Forged body design and strong construction allow free-flow chip removal. Leader bits cut very deeply, going through a 4x4 wooden beam without needing an extension and can be re-sharpened with a file.

                                                      Mag-Bit 780 Bell Hanger Bit
                                                      Availability: Stock
                                                      Mag-Bit Item #: 786.18.1216 -

                                                        The Mag-Bit 786.18.1216 3/4" x 18" Bell Hanger Bits are made of high carbon steel for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling. This bit also works well for drilling through wood when you will also be hitting some metal such as when drilling column caps. Mag-Bit Website Additional Bell Hanger Information ...

                                                        Relton Rebar Eater Concrete Bit
                                                        Retail: $49.00
                                                        Availability: Ships Direct
                                                        Relton Item #: SRB-6 -

                                                          Relton 3/8" x 8" SRB-6 Rotary-Only SDS-PLUS Rebar Eater Bit are the answer to drilling 3/8" holes through concrete-embedded rebar! No more broken or shattered hammer bits. You can now you can drill through the rebar and not have to relocate the hole to avoid the rebar! Suggested RPM's: 850-1200 Rebar Eater Brochure Watch The Demo ...

                                                          Makita 724114-A Super Thin Metal Cut-Off Wheel
                                                          Availability: Stock
                                                          Makita Item #: 724114-A-25 -

                                                            The Makita 4" x 3/32" x 5/8" A-90358 Super Thin Metal Cut-Off Wheels are ideal for cutting various types of metals quickly and cleanly when on the jobsite or in the shop. The blade is thin so you will always get a relatively clean cut. 46 Grit 15,300 Max RPM 25 per pack

                                                            Diamond Products 74960 4-1/2" x .080" Star Blue Turbo Continous Diamond Blade
                                                            Availability: Stock
                                                            Diamond Products Item #: 74960 -

                                                              Diamond Products 74960 4-1/2" x .080" Continuous Rim Turbo Star Blue Diamond Blades offer a faster cut than segmented blades due to the serrated segment design, allowing less surface-to-surface contact. Star Blue blades are economically priced and offer a great cutting value. Good Quality Diamond Good Cutting Value General purpose cutting in hard materials Dry or wet cutting Diamond Quality: 2 (Higher Number = Better Quality) T7B: Cured concrete and general purpose cutting Arbor: 7/8" Max RPM:...

                                                              Driltec 5/32" x 4" x 6-1/2" SDS-Plus Bit - Bionic Cutter
                                                              Availability: Stock
                                                              Driltec, Inc Item #: AD405220 -

                                                                The Driltec AD-405-220 5/32" x 4" (Usable Length) x 6-1/2" SDS-Plus Bit with Bionic Cutter features sharper cutting edges, with two center points for faster and more accurate drilling. Driltec SDS-Plus bits are ideal for small and fast drilling jobs in concrete and masonry. Driltec SDS-Plus Bits emphasize ergonomics and operator convenience to reduce the impact of hand-arm vibrations associated with the use of electric rotary hammers. Unique concave carbide tip design, accelerates drilling...

                                                                Mag-Bit 701 Single Spur Short Wood Auger Bit
                                                                Availability: Stock
                                                                Mag-Bit Item #: 701.1016 -

                                                                  The Mag-Bit 701.1016 5/8" x 7-7/8" Single Spur Short Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. The shorter length of the Mag-Bit 701 series allows you to get into tighter spaces like between wall studs. Additional Short Auger Information Auger Technical Information ...

                                                                  Diablo DS0608CF 6" x 8 TPI Carbide Steel Demon Reciprocating Saw Blade
                                                                  Availability: Stock
                                                                  Diablo Tools Item #: DS0608CF3 -

                                                                    For Metal Cutting (3/16" to 1/2") Up To 20 Times Faster! The Diablo DS0608CF3 3-Pack Steel Demon Carbide-tipped reciprocating blades are the first carbide-tipped blades designed for extreme metal cutting; including high strength alloys, cast iron, and stainless steel. This high performance carbide-tipped blade delivers unmatched 20 times longer cutting life than standard bi-metal blades in extreme thick metal cutting applications between 3/16” to 1/2”. High performance carbide for greater...

                                                                    Freud Diablo D0724A 7-1/4" Carbide Framing Saw Blades
                                                                    Availability: Stock
                                                                    Diablo Tools Item #: D0724A -

                                                                      Ideal for General Construction Applications, Including Fast, Efficient Ripping and Crosscutting The Diablo D0724A 7-1/4" x 24T Carbide Framing Blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and...

                                                                      Lenox Tuff Tooth General Purpose Bi-Metal Reciprocating Saw Blades
                                                                      Availability: Stock
                                                                      Lenox Saw Item #: 810R -

                                                                        The Lenox 810R 8" x 3/4" x .050" x 10TPI reciprocating saw blade can be used for cutting nail-embedded wood, composition materials and plastics, pipe, carbon steel, stainless steel (1/8" - 1/4" thick) and non-ferrous metal (1/8" - 1/2" thick). Lenox� Tuff Tooth�� Bi-Metal Reciprocating Saw Blades keep cutting where others fail. They are shatter resistant. The teeth retain their sharpness and they cut fast. All Lenox reciprocating blades are of bi-metal construction. This does not mean that...

                                                                        Lenox Tuff Tooth Bi-Metal Reciprocating Saw Blades
                                                                        Availability: Stock
                                                                        Lenox Saw Item #: 956R -

                                                                          The Lenox 956R 9" x 3/4" x .050" x 6TPI Reciprocating Saw Blade is used for fast cutting, roughing-in work and nail-embedded wood. The 959R blade can be used for cutting material up to 6" in width. Lenox� Tuff Tooth�� Bi-Metal Reciprocating Saw Blades keep cutting where others fail. They are shatter resistant. The teeth retain their sharpness and they cut fast. All Lenox reciprocating blades are of bi-metal construction. This does not mean that they cut two types of metal. It means that they...

                                                                          Lenox Tuff Tooth Demolition Bi-Metal Reciprocating Saw Blades
                                                                          Availability: Stock
                                                                          Lenox Saw Item #: 966R -

                                                                            The Lenox 966R 9" x 7/8" x .062" x 6TPI Demolition Reciprocating Saw Blade is used for demolition work in wood and metal making it an ideal blade for remodeling and retrofitting. Each 966R demo blade has a unique configuration including an aggressive tang angle and tapered blade share to allow for cutting in tight areas Lenox� Tuff Tooth�� Bi-Metal Reciprocating Saw Blades keep cutting where others fail. They are shatter resistant. The teeth retain their sharpness and they cut fast. All Lenox...

                                                                            Exchange-A-Blade 2070222 1-1/4" Wood Flush Oscillating Blade (5-Pack)
                                                                            Availability: Stock
                                                                            Exchange-A-Blade Item #: 2070222 -

                                                                              The Exchange-A-Blade 2070222 (5-Pack of 2070022 Blades) 1-1/4" Wood Flush Cut Blade cuts up to 1-1/2" in depth. This blade is recommended for wood but also can be used to cut plastic, drywall and other soft materials.The universal arbor means this blade can be used in most tools on the market including: Dremel�, Fein�, Ridgid�, Bosch�, Milwaukee�, Stanley FatMax�, Porter-Cable�, Rockwell�, Sonictool (SS5120), Skil�, Craftsman�, Mastercraft�, King�, Genesis�, Haussmann�, Chicago Electric�,...

                                                                              Relton Rebar Eater Concrete Bit
                                                                              Retail: $49.00
                                                                              Availability: Stock
                                                                              Relton Item #: RB-8 -

                                                                                Relton 1/2" x 12" RB-8 Rotary-Only Rebar Eater Bit are the answer to drilling 1/2" holes through concrete-embedded rebar! No more broken or shattered hammer bits. You can now you can drill through the rebar and not have to relocate the hole to avoid the rebar! Suggested RPM's: 850-1200 Rebar Eater Brochure Watch The Demo ...

                                                                                Driltec 3/8" x 4" x 10" Spline Shank Bit - Bionic Cutter
                                                                                Retail: $75.73
                                                                                Availability: Stock
                                                                                Driltec, Inc Item #: AE075217 -

                                                                                  The Driltec AE-075-217 1/2" x 15-1/2" x 22" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

                                                                                  Driltec Ratio Rebar Cutter System
                                                                                  Availability: Stock
                                                                                  Driltec, Inc Item #: RL-050-420 -

                                                                                    The RL-050-420 Driltec 1/2" X 16" (useable length) x 18" Ratio Rebar Cutter Bit is used with an SDS-Plus rotary hammer for drilling through rebar embedded in concrete or masonry. This bit is used in the hammer mode so it not only drills the rebar but chips it away. This creates a faster drilling process. With the Driltec uniquely durable and aggressive carbide tips you save time and money in labor and replacement costs. Note: SDS-Plus Adapter is not included. It must be purchased separately to...

                                                                                    Mag-Bit 701 Single Spur Short Wood Auger Bit
                                                                                    Availability: Stock
                                                                                    Mag-Bit Item #: 701.1116 -

                                                                                      The Mag-Bit 701.1116 11/16" x 7-7/8" Single Spur Short Wood Auger Bit has an opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. The shorter length of the Mag-Bit 701 series allows you to get into tighter spaces like between wall studs. Additional Short Auger Information Auger Technical Information ...

                                                                                      Lenox General Purpose Tuff Tooth Bi-Metal Reciprocating Saw Blades 5/Pack
                                                                                      Availability: Stock
                                                                                      Lenox Saw Item #: 110R -

                                                                                        The Lenox 110R 12" x 3/4" x .050" x 10/14TPI reciprocating saw blade can be used for cutting nail-embedded wood, composition materials, plastics, pipe, carbon steel, stainless steel (1/8" - 1/2" thick) as well as demolition work, fire and rescue. Lenox� Tuff Tooth�� Bi-Metal Reciprocating Saw Blades keep cutting where others fail. They are shatter resistant. The teeth retain their sharpness and they cut fast. All Lenox reciprocating blades are of bi-metal construction. This does not mean that...

                                                                                        Lenox Wood Cutting Tuff Tooth Bi-Metal Reciprocating Saw Blades 5/Pack
                                                                                        Availability: Stock
                                                                                        Lenox Saw Item #: 156R -

                                                                                          The Lenox 156R 12" x 3/4" x .050" x 6TPI General Purpose Reciprocating Saw Blade is used for fast cutting, roughing-in work and nail-embedded wood. The 12" length of the 156R allows you to cut material up to 9" in diameter. Lenox� Tuff Tooth�� Bi-Metal Reciprocating Saw Blades keep cutting where others fail. They are shatter resistant. The teeth retain their sharpness and they cut fast. All Lenox reciprocating blades are of bi-metal construction. This does not mean that they cut two types of...

                                                                                          Mag-Bit 780 Bell Hanger Bit
                                                                                          Availability: Stock
                                                                                          Mag-Bit Item #: 786.18.1316 -

                                                                                            The Mag-Bit 786.18.1316 13/16" x 18" Bell Hanger Bits are made of high carbon steel for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling. This bit also works well for drilling through wood when you will also be hitting some metal such as when drilling column caps. Mag-Bit Website Additional Bell Hanger Information ...

                                                                                            Lenox® Leader® Self Feed Bits
                                                                                            Availability: Stock
                                                                                            Lenox Saw Item #: LL256 -

                                                                                              The Lenox��_ Leader��_ LL256 2-9/16" Self Feed Bits with their precision ground teeth and outside diameter threads are designed for automatic feeding. Forged body design and strong construction allow free-flow chip removal. Leader bits cut very deeply, going through a 4x4 wooden beam without needing an extension and can be re-sharpened with a file.