Login      View Cart   Checkout   Wish List
Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Simpson Strong Tie 7/8" x 24" Sweep Bolt
Availability: Stock
Simpson Strong-Tie Item #: SB5/8x24 -

    The geometry of the SB5/8x24 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 6" wide concrete stem wall without creating excessive horizontal forces. The SB5/8x24 is designed to maximize performance with minimum embedment of 18". Information and Installation Details ...

    Simpson Strong-Tie CB44 Column Base
    Availability: Stock
    Simpson Strong-Tie Item #: CB44 -

      Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

      Simpson Strong-Tie CBSQ44 Column Base
      Availability: Stock
      Simpson Strong-Tie Item #: CBSQ44 -

        The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x 3-1/2") Strap: 10 Ga. x 2-1/4" Wide x 8-3/8" High CBSQ44 Information and Installation...

        Simpson Strong-Tie EPB44 Elevated Post Base
        Availability: Ships Direct
        Simpson Strong-Tie Item #: EPB44 -

          Simpson Strong-Tie EPB44 allow you to elevated a 4 x 4 (3-1/2" x 3-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and un-braced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...

          Simpson MASA anchor
          Availability: Stock
          Simpson Strong-Tie Item #: MASA -

            Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASA version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish around No labor costs involved in drilling plates and...

            Simpson PB44 Post Bases
            Availability: Stock
            Simpson Strong-Tie Item #: PB44 -

              The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails Additional information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....

              Simpson Strong-Tie PBS44 Standoff Post Base
              Availability: Stock
              Simpson Strong-Tie Item #: PBS44A -

                Simpson Strong-Tie PBS44A Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Finish: Standard G90 Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz....

                Simpson Strong Tie SSTB Anchor Bolts
                Availability: Stock
                Simpson Strong-Tie Item #: SSTB14 -

                  The SSTB14 (5/8" Diameter by 15-3/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. This SSTB14 is a 5/8" diameter anchor bolt designed and tested specifically for shallow foundation installations. Simpson Website Information and...

                  Simpson Strong Tie 7/8" x 24" Sweep Bolt
                  Availability: Ships Direct
                  Simpson Strong-Tie Item #: SB5/8x24HDG -

                    The geometry of the SB5/8x24HDG Hot Dipped Galvanized 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 6" wide concrete stem wall without creating excessive horizontal forces. The SB5/8x24 is designed to maximize performance with minimum embedment of 18". Information and Installation Details ...

                    Simpson Strong-Tie CB44HDG Column Base
                    Availability: Ships Direct
                    Simpson Strong-Tie Item #: CB44HDG -

                      Simpson Strong-Tie CB44HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...

                      Simpson Strong-Tie CBSQ44HDG Column Base
                      Availability: Stock
                      Simpson Strong-Tie Item #: CBSQ44HDG -

                        The Simpson CBSQ44-SDS2HDG Hot Dipped Galvanized (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x...

                        Simpson Strong-Tie EPB44HDG Elevated Post Base
                        Availability: Ships Direct
                        Simpson Strong-Tie Item #: EPB44HDG -

                          Simpson Strong-Tie EPB44HDG Hot Dipped Galvanized allow you to elevated a 4 x 4 (3-1/2" x 3-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance...

                          Simpson MASA anchor
                          Availability: Stock
                          Simpson Strong-Tie Item #: MASA-50 -

                            Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASA version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish around No labor costs involved in drilling plates and...

                            Simpson PB44Z Post Bases
                            Availability: Stock
                            Simpson Strong-Tie Item #: PB44Z -

                              The Simpson PB44Z ZMax® Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coated for extra corrosion resistance Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails Additional information and installation instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than...

                              Simpson Strong-Tie PBS44 Standoff Post Base
                              Availability: Stock
                              Simpson Strong-Tie Item #: PBS44AZ -

                                Simpson Strong-Tie PBS44AZ Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. ZMax® coating provides additional protection from the weather elements. Finish: ZMax® Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions ZMax® Galvanized Coating Information...

                                Simpson Strong Tie SSTB Anchor Bolts
                                Availability: Stock
                                Simpson Strong-Tie Item #: SSTB16 -

                                  The SSTB16 (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. This SSTB14 is a 5/8" diameter anchor bolt designed and tested specifically for shallow foundation installations. Simpson Website Information and...

                                  Simpson Strong Tie 7/8" x 24" Sweep Bolt
                                  Availability: Stock
                                  Simpson Strong-Tie Item #: SB7/8x24 -

                                    The geometry of the SB7/8x24 7/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB7/8x24 is designed to maximize performance with minimum embedment of 18". Information and Installation Details ...

                                    Simpson Strong-Tie CB46 Column Base
                                    Availability: Stock
                                    Simpson Strong-Tie Item #: CB46 -

                                      Simpson Strong-Tie CB46 column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

                                      Simpson Strong-Tie CBSQ46 Column Base
                                      Availability: Stock
                                      Simpson Strong-Tie Item #: CBSQ46 -

                                        The Simpson CBSQ46-SDS2 (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3" Wide x 8-11/16" High CBSQ46 Information and Installation...

                                        Simpson MASA anchor
                                        Availability: Stock
                                        Simpson Strong-Tie Item #: MASAZ -

                                          Simpson Strong-Tie MASAZ anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAZ version is used for installation on standards forms. Zmax Galvanized (G185) with a minimum of 1.85 oz. of zinc per square foot of surface area (hot-dip galvanized per ASTM A653 total both sides). Zmax products require hot-dip...

                                          Simpson Strong-Tie PBS44 Standoff Post Base
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: PBS44A-HDG -

                                            Simpson Strong-Tie PBS44AHDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Hot Dipped Galvanized (HDG) coating provides additional protection from the elements. Finish: Hot Dipped Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation...

                                            Simpson Strong Tie SSTB Anchor Bolts
                                            Availability: Stock
                                            Simpson Strong-Tie Item #: SSTB16L -

                                              The SSTB16L (5/8" Diameter by 19-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. This SSTB14 is a 5/8" diameter anchor bolt designed and tested specifically for shallow foundation installations. Simpson Website Information and...

                                              Simpson Strong Tie 7/8" x 24" Sweep Bolt
                                              Availability: Ships Direct
                                              Simpson Strong-Tie Item #: SB7/8x24HDG -

                                                The geometry of the SB7/8x24HDG 7/8" x 24" Hot Dipped Galvanized anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB7/8x24 is designed to maximize performance with minimum embedment of 18". Information and Installation Details ...

                                                Simpson Strong-Tie CB46HDG Column Base
                                                Availability: Ships Direct
                                                Simpson Strong-Tie Item #: CB46HDG -

                                                  Simpson Strong-Tie CB46HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 6 (3-1/2" x 5-1/2") post to concrete. The CB46HDG base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB46HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...

                                                  Simpson Strong-Tie CBSQ46HDG Column Base
                                                  Availability: Ships Direct
                                                  Simpson Strong-Tie Item #: CBSQ46HDG -

                                                    The Simpson CBSQ46-SDS2HDG (for 3-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 4 x 6 Nominal (3-1/2" x 5-1/2") Base: 12 Ga. (3-9/16" x 5-5/16") Strap: 10 Ga. x 3"...

                                                    Simpson MASA anchor
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: MASAZ-50 -

                                                      Simpson Strong-Tie MASAZ anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAZ version is used for installation on standards forms. Zmax Galvanized (G185) with a minimum of 1.85 oz. of zinc per square foot of surface area (hot-dip galvanized per ASTM A653 total both sides). Zmax products require hot-dip...

                                                      Simpson PB46 Post Bases
                                                      Availability: Stock
                                                      Simpson Strong-Tie Item #: PB46 -

                                                        The Simpson PB46 Post Base for 4 x 6 (3-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails Additional information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....

                                                        Simpson Strong-Tie PBS46 Standoff Post Base
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: PBS46 -

                                                          Simpson Strong-Tie PBS46 Standoff Post Bases are used to connect a 4 x 6 (3-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Available only in standard galvanizing. Finish: Standard G90 Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...

                                                          Simpson Strong Tie SSTB Anchor Bolts
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: SSTB16HDG -

                                                            The SSTB16HDG Hot Dipped Galvanized (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. This SSTB14 is a 5/8" diameter anchor bolt designed and tested specifically for shallow foundation installations. Simpson Website...

                                                            Simpson Strong Tie 7/8" x 24" Sweep Bolt
                                                            Availability: Stock
                                                            Simpson Strong-Tie Item #: SB1X30 -

                                                              The geometry of the SB1x30 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB1x30 with a minimum embedment of 24" is intended to cover holdown devices that exceed the capacity of SSTB anchors. Information and Installation Details ...

                                                              Simpson Strong-Tie CB66 Column Base
                                                              Availability: Stock
                                                              Simpson Strong-Tie Item #: CB66 -

                                                                Simpson Strong-Tie CB66 column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

                                                                Simpson Strong-Tie CBSQ66 Column Base
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: CBSQ66 -

                                                                  The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2") Strap: 10 Ga. x 3" Wide x 8-3/4" High CBSQ66 Information and Installation...

                                                                  Simpson Strong-Tie EPB46 Elevated Post Base
                                                                  Availability: Ships Direct
                                                                  Simpson Strong-Tie Item #: EPB46 -

                                                                    Simpson Strong-Tie EPB46 allow you to elevated a 4 x 6 (3-1/2" x 5-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...

                                                                    Simpson MASAP anchors
                                                                    Availability: Stock
                                                                    Simpson Strong-Tie Item #: MASAP -

                                                                      Simpson Strong-Tie MASAP anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAP is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAP version is used for installation on panelized forms. Attaches easily to the concrete form for quick installation Lays flat on the panelized form so there is no anchor bolt to finish around No labor costs involved in drilling...

                                                                      Simpson PB66 Post Bases
                                                                      Availability: Stock
                                                                      Simpson Strong-Tie Item #: PB66 -

                                                                        The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts Additional information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot...

                                                                        Simpson Strong-Tie PBS66 Standoff Post Base
                                                                        Availability: Stock
                                                                        Simpson Strong-Tie Item #: PBS66 -

                                                                          Simpson Strong-Tie PBS66 Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Finish: Standard G90 Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of...

                                                                          Simpson Strong Tie SSTB Anchor Bolts
                                                                          Availability: Stock
                                                                          Simpson Strong-Tie Item #: SSTB20 -

                                                                            The SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. This SSTB14 is a 5/8" diameter anchor bolt designed and tested specifically for shallow foundation installations. Simpson Website Information and...

                                                                            Simpson Strong Tie 7/8" x 24" Sweep Bolt
                                                                            Availability: Ships Direct
                                                                            Simpson Strong-Tie Item #: SB1X30HDG -

                                                                              The geometry of the SB1x30HDG Hot Dipped Galvanized 1" x 30" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB1x30HDG with a minimum embedment of 24" is intended to cover holdown devices that exceed the capacity of SSTB anchors. Information and Installation Details ...

                                                                              Simpson Strong-Tie CB66HDG Column Base
                                                                              Availability: Stock
                                                                              Simpson Strong-Tie Item #: CB66HDG -

                                                                                Simpson Strong-Tie CB66HDG Hot Dipped Galvanized column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66HDG base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...

                                                                                Simpson Strong-Tie CBSQ66HDG Column Base
                                                                                Availability: Stock
                                                                                Simpson Strong-Tie Item #: CBSQ66HDG -

                                                                                  The Simpson CBSQ66-SDS2HDG Hot Dipped Galvanized (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2")...

                                                                                  Simpson Strong-Tie EPB46HDG Elevated Post Base
                                                                                  Availability: Ships Direct
                                                                                  Simpson Strong-Tie Item #: EPB46HDG -

                                                                                    Simpson Strong-Tie EPB46HDG Hot Dipped Galvanized allow you to elevated a 4 x 6 (3-1/2" x 5-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance...

                                                                                    Simpson MASAP anchors
                                                                                    Availability: Stock
                                                                                    Simpson Strong-Tie Item #: MASAP-50 -

                                                                                      Simpson Strong-Tie MASAP anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAP is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAP version is used for installation on panelized forms. Attaches easily to the concrete form for quick installation Lays flat on the panelized form so there is no anchor bolt to finish around No labor costs involved in drilling...

                                                                                      Simpson PB66Z Post Bases
                                                                                      Availability: Stock
                                                                                      Simpson Strong-Tie Item #: PB66Z -

                                                                                        The Simpson PB66Z ZMax® Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coating Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts Additional information and installation instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185...

                                                                                        Simpson Strong-Tie PBS66 Standoff Post Base
                                                                                        Availability: Stock
                                                                                        Simpson Strong-Tie Item #: PBS66-HDG -

                                                                                          Simpson Strong-Tie PBS66HDG Hot Dipped Galvanized Standoff Post Bases are used to connect a 6 x 6 (5-1/2" x 5-1/2") to a concrete slab or pier. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Hot dipped galvanizing provides and additional layer of protection from deterioration due to weather. Finish: Hot Dipped Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and...

                                                                                          Simpson Strong Tie SSTB Anchor Bolts
                                                                                          Availability: Stock
                                                                                          Simpson Strong-Tie Item #: SSTB20L -

                                                                                            The SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. This SSTB14 is a 5/8" diameter anchor bolt designed and tested specifically for shallow foundation installations. Simpson Website Information and...

                                                                                            Simpson Strong-Tie CB68 Column Base
                                                                                            Availability: Stock
                                                                                            Simpson Strong-Tie Item #: CB68 -

                                                                                              Simpson Strong-Tie CB68 column bases are used to provide a connection of a 6 x 8 (5-1/2" x 7-1/2") post to concrete. The CB68 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 7-1/2") Fasteners: (2) 5/8" Machine Bolts CB68 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

                                                                                              Simpson Strong-Tie CBSQ88 Column Base
                                                                                              Availability: Stock
                                                                                              Simpson Strong-Tie Item #: CBSQ88 -

                                                                                                The Simpson CBSQ88-SDS2 (for 7-1/2" x 7-1/2" post) column bases include (12) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 8 x 8 Nominal (7-1/2" x 7-1/2") Base: 12 Ga. (7-1/2" x 7-3/8") Strap: 7 Ga. x 3" Wide x 8-11/16" High CBSQ88 Information and Installation...

                                                                                                Simpson Strong-Tie EPB66 Elevated Post Base
                                                                                                Availability: Ships Direct
                                                                                                Simpson Strong-Tie Item #: EPB66 -

                                                                                                  Simpson Strong-Tie EPB66 allow you to elevated a 6 x 6 (5-1/2" x 5-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...