Simpson Strong Tie DTT2Z Deck Post Connectors
Availability: Stock
Simpson Strong-Tie Item #: DTT2Z -

    The DTT2Z is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the deck to the house. Additionally, the versatile DTT2Z is load rated...

    Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws
    Availability: Stock
    Simpson Strong-Tie Item #: HGA10EA -

      The Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws Material: 14 Gauge Finish: Standard G90 Zinc Fastener Options: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10 Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90...

      Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws
      Availability: Stock
      Simpson Strong-Tie Item #: HGA10BX -

        The Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws. Save by purchasing by the box of 10 HGA10 angles. Material: 14 Gauge Finish: Standard G90 Zinc Fastener Options: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10 Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc...

        Simpson Strong Tie 7/8" x 24" Sweep Bolt
        Availability: Stock
        Simpson Strong-Tie Item #: SB5/8x24 -

          The geometry of the SB5/8x24 5/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 6" wide concrete stem wall without creating excessive horizontal forces. The SB5/8x24 is designed to maximize performance with minimum embedment of 18". Information and Installation Details ...

          Simpson Strong-Tie A34 Framing Clip
          Availability: Stock
          Simpson Strong-Tie Item #: A34EA -

            The Simpson Strong-Tie A34 Framing Clips for connecting wood to wood at a 90° angle. Material: 18 Gauge Finish: Standard G90 Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information & Installation Instructions Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per square foot of surface area (total both sides). Level of Corrosion Resistance: Low Please Note: If there are any items on the Simpson Strong-Tie website that...

            Simpson Strong Tie ABU44 Adjustable Post Bases
            Availability: Stock
            Simpson Strong-Tie Item #: ABU44 -

              The Simpson Strong-Tie ABU44 is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44 features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 16 Gauge Strap Material: 12 Gauge Dimensions: (W) 3-9/16" x (L) 3" x (H) 5-1/2" Finish:...

              Simpson Strong Tie ABW44Z Adjustable Post Bases
              Availability: Stock
              Simpson Strong-Tie Item #: ABW44Z -

                The Simpson Strong-Tie ABW44Z for 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW44Z allows...

                Simpson Strong-Tie AC Post Caps (Pair)
                Availability: Stock
                Simpson Strong-Tie Item #: AC4 -

                  The Simpson Strong-Tie AC4 Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 6-1/2" (L) Fastener Options: (16) 16d (Min) (28) 16d (Max) (28) SD10 x 1-1/2" (Max) AC4 Information and Installation Instructions. Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per square foot of surface area (total both sides). Level of Corrosion Resistance: Low Please Note: If there...

                  Simpson Strong-Tie BC4 Post Caps
                  Availability: Stock
                  Simpson Strong-Tie Item #: BC4 -

                    The Simpson BC4 Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 3-9/16" (L) Fastener Options: (12) 16d or (12) SD10 x 1-1/2" BC4 Information and Installation Instructions. Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per square foot of surface area (total both sides). Level of Corrosion Resistance: Low Please Note: If there are any items on...

                    Simpson Strong Tie BC Half Base
                    Availability: Stock
                    Simpson Strong-Tie Item #: BC40 -

                      The Simpson Strong-Tie BC40 Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 3-9/16" x (L) 3-1/4" x (H) 2-1/4" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC40 Information and Installation Instructions. Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per square foot of surface area (total both sides). Level of Corrosion Resistance: Low Please...

                      Simpson Strong-Tie CB44 Column Base
                      Availability: Stock
                      Simpson Strong-Tie Item #: CB44 -

                        Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44 Information and Installation Instructions Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per square foot of surface area (total both sides). Level of...

                        Simpson Strong-Tie CBSQ44 Column Base
                        Availability: Stock
                        Simpson Strong-Tie Item #: CBSQ44 -

                          The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x 3-1/2") Strap: 10 Ga. x 2-1/4" Wide x 8-3/8" High CBSQ44 Information and Installation...

                          Simpson Strong-Tie CJT Concealed Joist Ties
                          Availability: Stock
                          Simpson Strong-Tie Item #: CJT3S -

                            The Simpson Strong-Tie CJT3S is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3S short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 6 Glulam Beam - 3-1/8" x 7-1/2" PSL - 3-1/2 x...

                            Simpson Strong Tie CMST Coil Strapping
                            Availability: Stock
                            Simpson Strong-Tie Item #: CMST12 -

                              Simpson Strong-Tie CMST12 Coil Strap allows you to install 3" wide strapping at various lengths depending on your span requirements. CMST12 are approved for use with SD Screws as a nail substitution. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3" (Wide) x 40' (Length) Fasteners: 10d or 16d depending on end length and material CMST12 Information and Installation Instructions. Please Note: If there are any items on the Simpson website that you do not see on the DHC Supplies...

                              Simpson Strong Tie CPT44Z Concealed Post Tie
                              Availability: Ships Direct
                              Simpson Strong-Tie Item #: CPT44Z -

                                The CPT44Z concealed 4 x 4 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 2-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT44Z is tested and load-rated for uplift,...

                                Simpson Strong-Tie DSC2L Drag Strut Connectors
                                Availability: Stock
                                Simpson Strong-Tie Item #: DSC2L -

                                  The DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2L-SDS3 Information and Installation Instructions. Please Note: If there are any items on the Simpson website that you do...

                                  Simpson Strong-Tie ECC44 Column Caps
                                  Availability: Stock
                                  Simpson Strong-Tie Item #: ECC44 -

                                    Simpson Strong-Tie ECC44 End Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. ECC44 End Column Caps should be used when the 4x beam ends at the 4x post. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 5-1/2" (Length) Fasteners: (1) 5/8" Machine Bolt (Beam) , (2) 5/8" Machine Bolts (Post) ECC44 Information and Installation Instructions. Gray Paint Water-based paint intended to protect the product while it is...

                                    Simpson Strong-Tie ECCL Corner Column Caps
                                    Availability: Stock
                                    Simpson Strong-Tie Item #: ECCLL666 -

                                      Simpson Strong-Tie ECCLL666 End Corner Column Caps provide a left connection between (2) 6x beams and (1) 6 x 6 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 5-1/2" (Beams) x 5-1/2" (Posts) Fasteners: (6) 5/8" x 7" Machine Bolt (Beam) ECCLL666 Information and Installation Instructions. Please Note: If there are any items on the Simpson website that you do not see on the DHC Supplies website we will gladly special order them. Most special order...

                                      Simpson Strong-Tie ECCO Column Caps with SDS Screws
                                      Availability: Ships Direct
                                      Simpson Strong-Tie Item #: ECCO3 -

                                        Simpson Strong-Tie ECCO3 1/4 End Column Caps with no post straps provides a high capacity connection between a 3-1/8" wide beam and a steel post. The ECCO End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Material: 7 gauge Finish: No Coating Dimensions: 3-1/8" (Beam) x 7-1/2" (Length) Fasteners: (2) 5/8" Machine Bolt (Beam) ECCO3 1/4 Information and Installation Instructions. Please Note: If there are any items on the Simpson website that you...

                                        Simpson Strong-Tie ECCQ Column Caps with SDS Screws
                                        Availability: Stock
                                        Simpson Strong-Tie Item #: ECCQ44SDS2.5 -

                                          Simpson Strong-Tie ECCQ44SDS2.5 End Column Caps provide a high capacity connection between a 4x beam and a 4x post. ECCQ End Column Caps should be used when the beam ends at the post. Each ECCQ44SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 8-1/2" (Length) Included Fasteners: (30) 1/4"...

                                          Simpson Strong-Tie EPB44 Elevated Post Base
                                          Availability: Ships Direct
                                          Simpson Strong-Tie Item #: EPB44 -

                                            Simpson Strong-Tie EPB44 allow you to elevated a 4 x 4 (3-1/2" x 3-1/2") post from 1" to 2-1/2" above the concrete. This clearance allows the post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 8" Length Base Size:...

                                            Simpson Strong-Tie EPC Post Caps
                                            Availability: Stock
                                            Simpson Strong-Tie Item #: EPC44-16 -

                                              Simpson Strong-Tie EPC44-16 (16 Gauge) End Post Caps provide a connection between a 4x wide beam and a 4x post at medium design loads. EPC End Caps should be used when the beam ends at the post. 16-Gauge caps provide the same lateral loads as 12-Gauge caps but less uplift. Material:16 gauge Finish: Galvanized Dimensions: 3-9/16" (Beam) x 3-9/16" (Post) x 7-5/16" (Length) Fastener Options: (8) 16d (8) SD10 x 1-1/2" Screws EPC44-16 Information and Installation Instructions. Corrosion Coating...

                                              EPC4Z 4x End Post Cap pc44,epc44, pc44-16, epc44-16, post caps, end post caps, EPC4Z, PC4Z, EPC6Z, PC6Z
                                              Availability: Stock
                                              Simpson Strong-Tie Item #: EPC4Z -

                                                The Simpson Strong-Tie EPC4Z post cap is designed with the post and beam flanges in-line so that the EPC4Z end post cap can accommodate several 4x post sizes as well as double 2x4 studs. The EPC4Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive� #9x1 1/2" SD Connector screws. ZMAX� finish is standard to meet exposure conditions in many environments. Width: 3-9/16" Dimensional Post Size: 4x4, 4x6, 4x8 or (2) 2x4...

                                                Simpson Strong-Tie GBC Gable Brace Connector
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: GBCEA -

                                                  Simpson Strong-Tie GBC Gable Brace Connector provides improved anchorage of gable bracing to the exterior wall. Installation flexibility for brace angle. GBC has tension and compression capacities. GBC clips must be installed in pairs to reach full load capacity. Material: 16 Gauge Finish: Standard G90 Zinc Installation Angles: 40° to 60° Fasteners-Gable Brace: (5) 8d x 1-1/2" Nails Fasteners-Top Plates: (7) 8d Nails GBC Information and Installation Instructions. ...

                                                  Simpson Strong-Tie H1 Hurricane Clip
                                                  Availability: Stock
                                                  Simpson Strong-Tie Item #: H1EA -

                                                    The Simpson Strong-Tie H1 Hurricane and Seismic Ties are designed to provide a secure connection between a 2x rafter and the double top plate at the point where the rafter rests on the plate. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners - To Rafter: (6) 8d x 1-1/2" Nails Fasteners - To Double Top Plate: (4) 8d Nails H1 Information and Installation Instructions. Corrosion Coating Information Standard G90 Zinc Coating: Zinc galvanized coating containing 0.90 oz. of zinc per square foot...

                                                    Simpson Strong-Tie HS3B Holdown Anchor
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: HD3B -

                                                      Simpson Strong-Tie HD3B Holdowns are a light duty bracket that is designed for a variety of uses including but not limited to shearwalls, braced-wall panels and other lateral applications. The holdown must be attached to the receiving member with 5/8" machine bolts. A minimum wood member thickness of 1-1/2" is required to reach the least allowable tension load. The bottom stud hole is 4-3/4" above the plate line so you can install the holdown flush with the plate without weakening the post or...

                                                      Simpson Strong-Tie HDQ8 Heavy Duty Holdowns
                                                      Availability: Stock
                                                      Simpson Strong-Tie Item #: HDQ8 -

                                                        The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8 greatly minimizes deflection under load. (20) 3" SDS Simpson Strong-Tie� Strong-Drive� screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value. Uses SDS screws which install...

                                                        Simpson HDU2-SDS2.5 Holdown with SDS screws
                                                        Availability: Stock
                                                        Simpson Strong-Tie Item #: HDU2 -

                                                          Simpson Strong-Tie HDU2-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson Strong-Tie� Strong-Drive� SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Pre-deflected body virtually eliminates deflection due to material stretch. Uses (6) 1/4" x 2-1/2" SDS...

                                                          Simpson Strong Tie HGUS26 Heavy Duty Joist Hangers
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: HGUS26 -

                                                            Simpson Strong Tie HGUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-5/8" (Wide) x 5-3/8" (Height) x 5" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS26 Information and Installation Instructions. Please Note: If there are any...

                                                            Simpson Strong-Tie HL Series Heavy Angle
                                                            Availability: Stock
                                                            Simpson Strong-Tie Item #: HL33EA -

                                                              Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL Heavy Angle Information and Installation Instructions. Please Note: If there are any items on the Simpson...

                                                              Simpson Strong-Tie HTU26 Face Mount Truss Hangers
                                                              Availability: Stock
                                                              Simpson Strong-Tie Item #: HTU26 -

                                                                Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various trusses. Additionally you can have the HTU26 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...

                                                                Simpson Strong Tie HU26 Heavy Joist Hangers
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: HU26 -

                                                                  Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 3-1/16" (Height) x 2-1/4" (Seat Depth) Fastener Options: (4) 16d Nails (2) 10d x 1-1/2" Nails (Joist) HU26 Information and...

                                                                  Simpson Strong Tie HUCQ210-2 Heavy Duty Joist Hangers
                                                                  Availability: Stock
                                                                  Simpson Strong-Tie Item #: HUCQ210-2 -

                                                                    Simpson Strong Tie HUCQ210-2-SDS 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS...

                                                                    Simpson Strong Tie HUS26 Heavy Joist Hangers
                                                                    Availability: Stock
                                                                    Simpson Strong-Tie Item #: HUS26 -

                                                                      Simpson Strong Tie HUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS26 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-5/8" (Wide) x...

                                                                      Simpson Strong Tie ITS Top Flange I-Joist Hangers
                                                                      Availability: Stock
                                                                      Simpson Strong-Tie Item #: ITS1.81/9.5 -

                                                                        Simpson Strong-Tie ITS1.81/9.5 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/9.5 installs 1-3/4" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...

                                                                        Simpson Strong Tie IUS1.81/9.5 Face Mount I-Joist Hangers
                                                                        Availability: Stock
                                                                        Simpson Strong-Tie Item #: IUS1.81/9.5 -

                                                                          Simpson Strong-Tie IUS1.81/9.5 is used to install 1-3/4" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-7/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) 10d Nails (Face) IUS1.81/9.5 Information and Installation Instructions. Please Note: If there...

                                                                          Simpson Strong-Tie L Series Reinforcing Angle
                                                                          Availability: Stock
                                                                          Simpson Strong-Tie Item #: L30EA -

                                                                            The Simpson Strong-Tie L30 Reinforcing Angle are a 3" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L30 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Length: 3" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (4) 10d x 1-1/2" (4) SD #9 x 1-1/2" L30 Information & Installation Instructions...

                                                                            Simpson Strong-Tie LS Series Skewable Angles
                                                                            Availability: Stock
                                                                            Simpson Strong-Tie Item #: LS30EA -

                                                                              The Simpson Strong-Tie LS30 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" " LS30 Information & Installation Instructions Corrosion Protection...

                                                                              Simpson Strong Tie LSTA Straps
                                                                              Availability: Ships Direct
                                                                              Simpson Strong-Tie Item #: LSTA9 -

                                                                                Simpson Strong-Tie LSTA9 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 9" (Length) Fasteners: (8) 10d Nails (8) SD9 x 1-1/2" Screws LSTA9...

                                                                                Simpson Strong-Tie LSU26 Adjustable Light Slopeable/Skewable U Hangers
                                                                                Availability: Stock
                                                                                Simpson Strong-Tie Item #: LSU26 -

                                                                                  Simpson Strong-Tie LSU26 is a both a field slopeable and skewable hanger used to attached 2 x 6 joists or rafter to a header. This hanger can be either sloped up or down as well as skewed up to 45 degrees left or right. Because LSU26 hangers have a closed back they must be installed on the header or the end of the joist first. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 4-7/8" (Height) x 1-1/2" (Flange) Fastener Options :...

                                                                                  Simpson LTT19 Tension Ties
                                                                                  Availability: Stock
                                                                                  Simpson Strong-Tie Item #: LTT19 -

                                                                                    The LTT19 Light Tension Tie is designed to use with 2x purlins or joists. There are three anchor bolt options, 1/2", 5/8" or 3/4" diameter. If you are using the 1/2" or 5/8" anchor bolt option you must also install a cut washer under the anchor nut. Simpson Strong-Tie Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 16 Gauge Plate Material: 3 Gauge Width: 1-3/4" Length: 19-1/8" Anchor Bolt: 1/2", 5/8" or 3/4" Fastener Options:(10) - 10d x...

                                                                                    Simpson Strong Tie LU Series Standard Joist Hangers
                                                                                    Availability: Stock
                                                                                    Simpson Strong-Tie Item #: LU24EA -

                                                                                      Simpson Strong-Tie LU24 2 x 4 Joist Hangers are an economical and time saving solution to securely installing 2 x 4 joists to a wood ledger or beam. You can install LU24 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) 10d Nails (Header-Min) (4) 16d Nails (Header-Max) (2) 10d x 1-1/2" Nails (Joist) Load Values Using...

                                                                                      Simpson Strong Tie LUS24 Double Shear Joist Hangers
                                                                                      Availability: Stock
                                                                                      Simpson Strong-Tie Item #: LUS24EA -

                                                                                        Simpson Strong Tie LUS24 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 1-9/16" (Wide) x 3-1/8"...

                                                                                        Simpson MASA anchor
                                                                                        Availability: Stock
                                                                                        Simpson Strong-Tie Item #: MASA -

                                                                                          Simpson Strong-Tie MASA anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASA is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASA version is used for installation on standards forms. Attaches easily to the concrete form for quick installation Lays flat on the form board so there is no anchor bolt to finish around No labor costs involved in drilling plates and...

                                                                                          Simpson Strong Tie LSTA/MSTA Straps
                                                                                          Availability: Ships Direct
                                                                                          Simpson Strong-Tie Item #: MSTA9 -

                                                                                            Simpson Strong-Tie MSTA9 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 9" (Length) Fasteners: (8) 10d Nails (8) SD9 x 1-1/2" Screws MSTA9...

                                                                                            Simpson PB Post Bases
                                                                                            Availability: Stock
                                                                                            Simpson Strong-Tie Item #: PB44 -

                                                                                              The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Additional information and installation instructions

                                                                                              Simpson Strong-Tie PBS Standoff Post Base
                                                                                              Availability: Stock
                                                                                              Simpson Strong-Tie Item #: PBS44A -

                                                                                                Simpson Strong-Tie PBS44A Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. Finish: Standard G90 Galvanized Base Material: 12 Gauge Strap Material: 14 Gauge Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS information and installation instructions ...

                                                                                                S/HDU4 Cold Formed Steel Holdown holdown, hdu, hhdq, hdq8, hhdq11, hhdq14, metal stud anchor
                                                                                                Availability: Stock
                                                                                                Simpson Strong-Tie Item #: S/HDU4 -

                                                                                                  The S/HDU4 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU4 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 5/8" Fasteners: (6) #14 Screws Height: 7-7/8"...

                                                                                                   
                                                                                                  Website prices are for online sales only. Individual branch prices may differ depending on the item, delivery method, and payment terms. Please contact your local DHC Supplies store for more information.

                                                                                                  For question regarding our service pledge and policies please visit our Service and Policy statement page.

                                                                                                  We know your security and privacy are important. Please view our Security and Privacy page for more details.

                                                                                                  Many data pages may require Adobe Acrobat® Reader® to view..

                                                                                                  Any trademarks used are the properties of their respective owners..

                                                                                                  Should you have any comments or concerns regarding this website please contact our webmaster.

                                                                                                  All information on this site is for informational purposes only and may not be up to date. We have provided additional information links on the product page whenever possible. Please refer to these links for confirmation of data provided. DHC Supplies, Inc. does not warrant any information provided by third parties..

                                                                                                  View Catalog Page

                                                                                                  © 2015 DHC Supplies, Inc.