Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Fasteners For Pneumatic Nailers and Staplers

DHC Supplies stocks a number of different fasteners that fit in a variety of nail guns and staplers on the market. Whether you are framing a building, installing siding, putting up interior or exterior trim we should have the right fastener for you. Additionally, we have a variety of corrosion protections available in certain fasteners in case that is a requirement for your project. If you do not see a fastener you require please do not hesitate to call our sales department direct at 800-323-2999. We can special order many other types of fasteners we normally do not stock.

Products 1-48 of 77
Show
Metal Connector Hitachi Nail
Misc Brands

More Information

Price: $38.30
Availability: Stock
Misc Brands Item #: FHNPJH112N8 -

    This 1-1/2" x .131 Heat Treated Metal Connector Nail is designed to be used in 31 Degree Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please Note: Consult your...

    Hy-Tek 120M22 Screw Shank Gun Nails
    Hy-Tek Fasteners

    More Information

    Price: $40.71
    Availability: Stock
    Hy-Tek Fasteners Item #: 120M22 -

      Hy-Tek 120M22 2-1/4" x .120" Screw Shank Nails are Equivalent to Common Nail LoadsHy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. For more information regarding the 120M22 Hy-Tek 2-1/4" x...

      Senco P08BABT Wide Crown Staples
      Senco

      More Information

      Price: $55.17
      Availability: Stock
      Senco Item #: P08BABT -

        Senco P08BABT, 1/2" Long, 1" Crown, Electro Galvanized P-Series Staples are primarily used for the application of building papers, lathing or any other project that requires a wide crown staple. Senco P-Series Staples Fit the Following Tools: Senco: PW200, PW150, PW150R, PW, PW-2", PW-R, SPS, MW, WC150RXP, WC200XP Hitachi N3424A, N5024A Duo-Fast RS-1748, KW-1748 OTHERS: Fasco: F3 SNW-38CT R, F30 SNW-50 R    Halstead HSW14 Do Not Use This Fastener for ACQ Pressure Treated...

        Senco AY10EAA Brad Nails
        Senco

        More Information

        Price: $21.90
        Availability: Stock
        Senco Item #: AY10EAA -

          Genuine Senco AY10EAA 5/8" Slight Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

          Senco A100509 1/2 inch Micro Headless Pin
          Senco

          More Information

          Price: $8.26
          Availability: Stock
          Senco Item #: A100509 -

            The Senco A100509 1/2" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

            Ring Shank Not Painted Stainless Steel Wire Coil Siding and Fencing Nails
            Simpson Strong-Tie

            More Information

            Price: $136.14
            Availability: Stock
            Simpson Strong-Tie Item #: COIL7 -

              Bright Checkered Nail Head The 2-1/4" x .092" Non-Painted Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Bright Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight and accepts...

              Simpson stainless steel bright full head gun nails
              Simpson Strong-Tie

              More Information

              Price: $73.14
              Availability: Stock
              Simpson Strong-Tie Item #: FHN08RSSS -

                The Simpson 2-1/2" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head on this unpainted nail is a standard flat head. The checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank 21º Collated Nails are designed to fit in the following tool. Please check your...

                Metal Connector Hot Dipped Galvanized Nail
                Misc Brands

                More Information

                Price: $51.87
                Availability: Stock
                Misc Brands Item #: FHNPJH112HD -

                  This 1-1/2" x .148 Hot Dipped Galvanized Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please...

                  Hy-Tek Screw Shank Gun Nails
                  Hy-Tek Fasteners

                  More Information

                  Price: $80.00
                  Availability: Stock
                  Hy-Tek Fasteners Item #: 120M22H -

                    Hy-Tek 120M22H Hot Dipped Galvanized 2-1/4" x .120" Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. This Hot Dipped Galvanized nail...

                    senco ay11eaa brad nails
                    Senco

                    More Information

                    Price: $22.83
                    Availability: Stock
                    Senco Item #: AY11EAA -

                      Genuine Senco AY11EAA 3/4" Slight Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

                      Senco P10BAB 5/8" Long Wide Crown Staples
                      Senco

                      More Information

                      Price: $37.81
                      Availability: Stock
                      Senco Item #: P10BAB -

                        Senco P10BAB, 5/8" Long, 1" Crown, Electro Galvanized P-Series Staples are primarily used for the application of building papers, lathing or any other project that requires a wide crown staple. Senco P-Series Staples Fit the Following Tools: Senco: PW200, PW150, PW150R, PW, PW-2", PW-R, SPS, MW, WC150RXP, WC200XP Hitachi N3424A, N5024A Duo-Fast RS-1748, KW-1748 OTHERS: Fasco: F3 SNW-38CT R, F30 SNW-50 R    Halstead HSW14 Do Not Use This Fastener for ACQ Pressure Treated...

                        Senco L10BABN Narrow Crown Staples
                        Senco

                        More Information

                        Price: $12.77
                        Availability: Stock
                        Senco Item #: L10BABN -

                          Senco L10BABN L-Series, 5/8" Long, 18-Gauge, 1/4" Narrow Crown Electro Galvanized Stapler for Cabinets, Casebacks, Decorative Trim, Drawers, Fascia and Soffits, Hardwood Flooring, Insulative Sheathing, Lattice, Molding, Spring Attachment-Upholstery, Trim, and Underlayment. Tools That Use L-Series Staples Senco:SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450 Hitachi: N3804AB, N3804A Makita: AT63A Duo-Fast: KN1848A, KN1848 Porter Cable: NS150A, NS150, NS100 OTHERS: Accuset: A100LS, A150LS,...

                          Senco A100629 5/8 inch Micro Headless Pin
                          Senco

                          More Information

                          Price: $8.55
                          Availability: Stock
                          Senco Item #: A100629 -

                            The Senco A100629 5/8" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

                            Senco m001002 1-1/4" 16ga. straight finish nails
                            Senco

                            More Information

                            Price: $8.54
                            Availability: Stock
                            Senco Item #: M001002 -

                              The M001002 Senco 1-1/4" long x 16 Gauge Straight Finish Nails are made from electro galvanized wire with Sencote coating for easier driving and more holding power. Best for furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels Senco 16 Gauge Finish Nails fit the following tools: Senco: AirFree32, FinishPro32 Accuset: A250SM Craftsman: 18431 Dewalt: D51256K Hitachi: NT65A, NT65MA2 Paslode: 3250-F16, IM250F Porter Cable: FN250A USPS FLAT RATE...

                              Ring Shank Dark Brown Stainless Steel Wire Coil Siding and Fencing Nails
                              Simpson Strong-Tie

                              More Information

                              Price: $225.35
                              Availability: Stock
                              Simpson Strong-Tie Item #: COIL7BRN -

                                Head is Painted Dark Brown! The Simpson Strong-Tie 2-1/4" x .092" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Dark Brown Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

                                Simpson stainless steel full head gun nails
                                Simpson Strong-Tie

                                More Information

                                Price: $113.73
                                Availability: Stock
                                Simpson Strong-Tie Item #: FHN16RSSS -

                                  The Simpson 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head on this unpainted nail is a standard flat head. The checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank 21º Collated Nails are designed to fit in the following tool. Please check your...

                                  Metal Connector Hitachi Nail
                                  Misc Brands

                                  More Information

                                  Price: $49.61
                                  Availability: Stock
                                  Misc Brands Item #: FHNPJH212HD -

                                    This 2-1/2" x .162" Hot Dipped Galvanized Heat Treated Metal Connector Nail is designed to be used in 31° Metal Connector Tools for installing Simpson Strong-Tie structural connectors like clips, straps, joist hangers and more. Since the installation of this product is usually done close to the face these nails have a paper tape as opposed to plastic that breaks off and poses a hazard to the eyes and face. Additionally they are heat treated to prevent bending during installation. Please...

                                    Hy-Tek Screw Shank Gun Nails
                                    Hy-Tek Fasteners

                                    More Information

                                    Price: $43.57
                                    Availability: Stock
                                    Hy-Tek Fasteners Item #: 12030M -

                                      Hy-Tek 12030M 3" x .120" Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. For more information regarding the 12030M Hy-Tek 3" x .120"...

                                      senco ay13eaa brad nails
                                      Senco

                                      More Information

                                      Price: $25.15
                                      Availability: Stock
                                      Senco Item #: AY13EAA -

                                        Genuine Senco AY13EAA 1" Slight Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

                                        Senco N13BAB 1" Medium Crown Staples
                                        Senco

                                        More Information

                                        Price: $24.41
                                        Availability: Stock
                                        Senco Item #: N13BAB -

                                          The Senco N13BAB, 1" Long, 7/16" Crown, Electro Galvanized Medium Crown 16-gauge staples have had many uses over the years. Even as the codes have changed to requiring the use of more nails than staples there are still many uses for N-Series staples. They include underlayment flooring, shingle siding, vinyl siding, facia, pallets, crating and more. These N-Series staples feature the Sencote coating that allows the staple to install easily and then create a bond with the wood that gives it more...

                                          Senco DA15EABN Electro Galvanized Finish Nails
                                          Senco

                                          More Information

                                          Price: $40.33
                                          Availability: Stock
                                          Senco Item #: DA15EABN -

                                            The Senco DA15EABN 1-1/4" Electro Galvanized (EG) 15 Gauge Angled Finish Nail has set the standard for finish carpenters with their outstanding quality and holding power! They are manufactured to Senco's strict specifications thus eliminating or reducing down time due to jamming and other tool malfunctions. Do Not Use The Senco DA15EABN for ACQ Pressure Treated Lumber. Use stainless steel when maximum corrosion resistance is required. DA Style Finish Nails Fit the Following Tools: (Please...

                                            Senco L11BAB Narrow Crown Staples
                                            Senco

                                            More Information

                                            Price: $14.03
                                            Availability: Stock
                                            Senco Item #: L11BAB -

                                              Senco L11BAB L-Series, 3/4" Long, 18-Gauge, 1/4" Narrow Crown Electro Galvanized Stapler for Cabinets, Casebacks, Decorative Trim, Drawers, Fascia and Soffits, Hardwood Flooring, Insulative Sheathing, Lattice, Molding, Spring Attachment-Upholstery, Trim, and Underlayment. Tools That Use L-Series Staples Senco:SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450 Hitachi: N3804AB, N3804A Makita: AT63A Duo-Fast: KN1848A, KN1848 Porter Cable: NS150A, NS150, NS100 OTHERS: Accuset: A100LS, A150LS,...

                                              Senco A100759 3/4 inch Micro Headless Pin
                                              Senco

                                              More Information

                                              Price: $8.92
                                              Availability: Stock
                                              Senco Item #: A100759 -

                                                The Senco A100759 3/4" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

                                                Senco M001003 1-1/2" 16ga. straight finish nails
                                                Senco

                                                More Information

                                                Price: $9.15
                                                Availability: Stock
                                                Senco Item #: M001003 -

                                                  The M001003 Senco 1-1/2" long x 16 Gauge Straight Finish Nails are made from electro galvanized wire with Sencote coating for easier driving and more holding power. Best for furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels. Senco 16 Gauge Finish Nails fit the following tools: Senco: AirFree32, FinishPro32 Accuset: A250SM Craftsman: 18431 Dewalt: D51256K Hitachi: NT65A, NT65MA2 Paslode: 3250-F16, IM250F Porter Cable: FN250A USPS FLAT...

                                                  10d Dark Brown Stainless Steel Painted Coil Nails
                                                  Simpson Strong-Tie

                                                  More Information

                                                  Price: $213.75
                                                  Availability: Stock
                                                  Simpson Strong-Tie Item #: COIL10BRN -

                                                    Head is Painted Dark Brown! The Simpson Strong-Tie 3" x .120" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 1,800 nails per box Head Color - Dark Brown Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

                                                    Simpson Strong-Tie stainless steel 8d Dark Brown full head gun nails
                                                    Simpson Strong-Tie

                                                    More Information

                                                    Price: $110.84
                                                    Availability: Stock
                                                    Simpson Strong-Tie Item #: FHN08SSBRN -

                                                      Head is Painted Dark Brown! The Simpson 2-3/8" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted dark brown to match siding or decking when applicable. The countersunk casing head with a checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank...

                                                      Hy-Tek Screw Shank Gun Nails
                                                      Hy-Tek Fasteners

                                                      More Information

                                                      Price: $80.00
                                                      Availability: Stock
                                                      Hy-Tek Fasteners Item #: 12030HDG -

                                                        Hy-Tek 12030HDG 3" x .120" Hot Dipped Galvanized Screw Shank Nails are Equivalent to Common Nail Loads Hy-Tek nails are used for wood-framed connections, wood- structural-panel shear walls and diaphragms; and for engineered connections of wood structural panels to wood framing. The top third of the nail length has a smooth shank. The bottom two-thirds has a helical screw shank. The nails are manufactured from SAE J403 low-carbon steel wire, grade 1015-1030. For more information regarding the...

                                                        Senco AX13EAA Brad Nails
                                                        Senco

                                                        More Information

                                                        Price: $12.70
                                                        Availability: Stock
                                                        Senco Item #: AX13EAA -

                                                          Genuine Senco AX13EAA 1" Medium Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

                                                          Senco Da17EPBN 1-1/2 inch finish nails
                                                          Senco

                                                          More Information

                                                          Price: $33.59
                                                          Availability: Stock
                                                          Senco Item #: DA17EPBN -

                                                            The Senco DA17EPBN 1-1/2" Bright 15 Gauge Angled Finish Nail has set the standard for finish carpenters with their outstanding quality and holding power! They are manufactured to Senco's strict specifications thus eliminating or reducing down time due to jamming and other tool malfunctions. Do Not Use The Senco DA17EPBN for ACQ Pressure Treated Lumber. Use stainless steel when maximum corrosion resistance is required.Use hot dipped galvanized when lesser corrosion resistance is required. DA...

                                                            Senco N15BAB hd staples
                                                            Senco

                                                            More Information

                                                            Price: $54.29
                                                            Availability: Stock
                                                            Senco Item #: N15BAB -

                                                              The Senco N15BAB, 1-1/4" Long, 7/16" Crown, Electro Galvanized Medium Crown 16-gauge staples have had many uses over the years. Even as the codes have changed to requiring the use of more nails than staples there are still many uses for N-Series staples. They include underlayment flooring, shingle siding, vinyl siding, facia, pallets, crating and more. These N-Series staples feature the Sencote coating that allows the staple to install easily and then create a bond with the wood that gives it...

                                                              Senco L12BAB Narrow Crown Staples
                                                              Senco

                                                              More Information

                                                              Price: $16.16
                                                              Availability: Stock
                                                              Senco Item #: L12BAB -

                                                                Senco L12BAB L-Series, 7/8" Long, 18-Gauge, 1/4" Narrow Crown Electro Galvanized Stapler for Cabinets, Casebacks, Decorative Trim, Drawers, Fascia and Soffits, Hardwood Flooring, Insulative Sheathing, Lattice, Molding, Spring Attachment-Upholstery, Trim, and Underlayment. Tools That Use L-Series Staples Senco:SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450 Hitachi: N3804AB, N3804A Makita: AT63A Duo-Fast: KN1848A, KN1848 Porter Cable: NS150A, NS150, NS100 OTHERS: Accuset: A100LS, A150LS,...

                                                                Senco A101009 1 inch Micro Headless Pin
                                                                Senco

                                                                More Information

                                                                Price: $9.52
                                                                Availability: Stock
                                                                Senco Item #: A101009 -

                                                                  The Senco A101009 1" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

                                                                  Senco M001004 1-3/4" 16ga. straight finish nails
                                                                  Senco

                                                                  More Information

                                                                  Price: $9.82
                                                                  Availability: Stock
                                                                  Senco Item #: M001004 -

                                                                    The M001004 Senco 1-3/4" long x 16 Gauge Straight Finish Nails are made from electro galvanized wire with Sencote coating for easier driving and more holding power. Best for furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels Senco 16 Gauge Finish Nails fit the following tools: Senco: AirFree32, FinishPro32 Accuset: A250SM Craftsman: 18431 Dewalt: D51256K Hitachi: NT65A, NT65MA2 Paslode: 3250-F16, IM250F Porter Cable: FN250A USPS FLAT RATE...

                                                                    Simpson Strong-Tie stainless steel dark brown full head gun nails
                                                                    Simpson Strong-Tie

                                                                    More Information

                                                                    Price: $140.85
                                                                    Availability: Stock
                                                                    Simpson Strong-Tie Item #: FHN16SSBRN -

                                                                      Head is Painted Dark Brown! The Simpson 3-1/4" X .131" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted dark brown to match siding or decking when applicable. The countersunk casing head with a checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank...

                                                                      Ring Shank Red Stainless Steel 15° Wire Coil Siding and Fencing Nails
                                                                      Simpson Strong-Tie

                                                                      More Information

                                                                      Price: $225.35
                                                                      Availability: Stock
                                                                      Simpson Strong-Tie Item #: COIL7RED -

                                                                        Head is Painted Red! The Simpson Strong-Tie 2-1/4" x .092" Red Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 3,600 nails per box Head Color - Red (Redwood) Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight...

                                                                        Senco P13BAB 1" Long Wide Crown Staples
                                                                        Senco

                                                                        More Information

                                                                        Price: $53.25
                                                                        Availability: Stock
                                                                        Senco Item #: P13BAB -

                                                                          Senco P13BAB, 1" Long, 1" Crown, Electro Galvanized P-Series Staples are primarily used for the application of building papers, lathing or any other project that requires a wide crown staple. Senco P-Series Staples Fit the Following Tools: Senco: PW200, PW150, PW150R, PW, PW-2", PW-R, SPS, MW, WC150RXP, WC200XP Hitachi N3424A, N5024A Duo-Fast RS-1748, KW-1748 OTHERS: Fasco: F3 SNW-38CT R, F30 SNW-50 R    Halstead HSW14 Do Not Use This Fastener for ACQ Pressure Treated Lumber Use...

                                                                          Senco L13BABN Narrow Crown Staples
                                                                          Senco

                                                                          More Information

                                                                          Price: $17.90
                                                                          Availability: Stock
                                                                          Senco Item #: L13BABN -

                                                                            Senco L13BABN L-Series, 1" Long, 18-Gauge, 1/4" Narrow Crown Electro Galvanized Stapler for Cabinets, Casebacks, Decorative Trim, Drawers, Fascia and Soffits, Hardwood Flooring, Insulative Sheathing, Lattice, Molding, Spring Attachment-Upholstery, Trim, and Underlayment. Tools That Use L-Series Staples Senco:SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450 Hitachi: N3804AB, N3804A Makita: AT63A Duo-Fast: KN1848A, KN1848 Porter Cable: NS150A, NS150, NS100 OTHERS: Accuset: A100LS, A150LS,...

                                                                            Senco DA17EABN Electro Galvanized Finish Nails
                                                                            Senco

                                                                            More Information

                                                                            Price: $42.20
                                                                            Availability: Stock
                                                                            Senco Item #: DA17EABN -

                                                                              The Senco DA17EABN 1-1/2" Electro Galvanized 15 Gauge Angled Finish Nail has set the standard for finish carpenters with their outstanding quality and holding power! They are manufactured to Senco's strict specifications thus eliminating or reducing down time due to jamming and other tool malfunctions. Do Not Use The Senco DA17EABN for ACQ Pressure Treated Lumber.Use stainless steel when maximum corrosion resistance is required DA Style Finish Nails Fit the Following Tools: (Please check your...

                                                                              Senco N17BAB Heavy Duty Staples
                                                                              Senco

                                                                              More Information

                                                                              Price: $57.83
                                                                              Availability: Stock
                                                                              Senco Item #: N17BAB -

                                                                                The Senco N17BAB, 1-1/2" Long, 7/16" Crown, Electro Galvanized Medium Crown 16-gauge staples have had many uses over the years. Even as the codes have changed to requiring the use of more nails than staples there are still many uses for N-Series staples. They include underlayment flooring, shingle siding, vinyl siding, facia, pallets, crating and more. These N-Series staples feature the Sencote coating that allows the staple to install easily and then create a bond with the wood that gives it...

                                                                                Senco AX15EAA brad nails
                                                                                Senco

                                                                                More Information

                                                                                Price: $14.44
                                                                                Availability: Stock
                                                                                Senco Item #: AX15EAA -

                                                                                  Genuine Senco AX15EAA 1-1/4" Medium Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

                                                                                  Senco A101259 1-1/4 inch Micro Headless Pin
                                                                                  Senco

                                                                                  More Information

                                                                                  Price: $10.12
                                                                                  Availability: Stock
                                                                                  Senco Item #: A101259 -

                                                                                    The Senco A101259 1-1/4" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package.

                                                                                    Senco M001005 2" 16ga. straight finish nails
                                                                                    Senco

                                                                                    More Information

                                                                                    Price: $10.44
                                                                                    Availability: Stock
                                                                                    Senco Item #: M001005 -

                                                                                      The M001005 Senco 2" long x 16 Gauge Straight Finish Nails are made from electro galvanized wire with Sencote coating for easier driving and more holding power. Best for furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels. Senco 16 Gauge Finish Nails fit the following tools: Senco: AirFree32, FinishPro32 Accuset: A250SM Craftsman: 18431 Dewalt: D51256K Hitachi: NT65A, NT65MA2 Paslode: 3250-F16, IM250F Porter Cable: FN250A ...

                                                                                      Ring Shank 3" red Stainless Steel 15° Wire Coil Siding and Fencing Nails
                                                                                      Simpson Strong-Tie

                                                                                      More Information

                                                                                      Price: $213.75
                                                                                      Availability: Stock
                                                                                      Simpson Strong-Tie Item #: COIL10RED -

                                                                                        Head is Painted Red! The Simpson Strong-Tie 3" x .120" Red (Redwood) Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 1,800 nails per box Head Color - Red (Redwood) Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

                                                                                        Simpson Strong-Tie stainless steel Sienna full head gun nails
                                                                                        Simpson Strong-Tie

                                                                                        More Information

                                                                                        Price: $110.84
                                                                                        Availability: Stock
                                                                                        Simpson Strong-Tie Item #: FHN08SSSIE -

                                                                                          Head is Painted Sienna! The Simpson 2-3/8" X .120" Stainless Strip Full Head Gun Nail is manufactured from Type 304 Stainless Steel. The head is painted sienna to match siding or decking when applicable. The countersunk casing head with a checker pattern on the head helps the nail blend with the wood grain. The annular ring shank increases pull-out resistance thus decreasing chances of the nails backing out over time. Type 304 stainless steel Countersunk casing head Ring Shank shank 21º...

                                                                                          Senco AX17EAA finish brad nails
                                                                                          Senco

                                                                                          More Information

                                                                                          Price: $16.76
                                                                                          Availability: Stock
                                                                                          Senco Item #: AX17EAA -

                                                                                            Genuine Senco AX17EAA 1-1/2" Medium Head 18 gauge brads manufactured to the demanding specifications that have made Senco one of the top quality pneumatic fastening companies for over 50 years. Do Not Use This Fastener for ACQ Pressure Treated LumberUse stainless steel when maximum corrosion resistance is required. Popular 18-Gauge Brad Tools Senco: FinishPro™25XP, FinishPro® 15, FinishPro® 18, SLP20, LS4, LS5 Hitachi: NT50AE, NT45A, NT32AE, NT50AD BOSTITCH: BT200K, BT35, BT50, T29-30,...

                                                                                            Senco P15BAB 1-1/4"Long Wide Crown Staples
                                                                                            Senco

                                                                                            More Information

                                                                                            Price: $62.08
                                                                                            Availability: Stock
                                                                                            Senco Item #: P15BAB -

                                                                                              Senco P15BAB, 1-1/4" Long, 1" Crown, Electro Galvanized P-Series Staples are primarily used for the application of building papers, lathing or any other project that requires a wide crown staple. Senco P-Series Staples Fit the Following Tools: Senco: PW200, PW150, PW150R, PW, PW-2", PW-R, SPS, MW, WC150RXP, WC200XP Hitachi N3424A, N5024A Duo-Fast RS-1748, KW-1748 OTHERS: Fasco: F3 SNW-38CT R, F30 SNW-50 R    Halstead HSW14 Do Not Use This Fastener for ACQ Pressure Treated Lumber...

                                                                                              Senco L14BAB 18 Ga. Narrow Crown Staples
                                                                                              Senco

                                                                                              More Information

                                                                                              Price: $19.56
                                                                                              Availability: Stock
                                                                                              Senco Item #: L14BAB -

                                                                                                Senco L14BAB L-Series, 1-1/8" Long, 18-Gauge, 1/4" Narrow Crown Electro Galvanized Stapler for Cabinets, Casebacks, Decorative Trim, Drawers, Fascia and Soffits, Hardwood Flooring, Insulative Sheathing, Lattice, Molding, Spring Attachment-Upholstery, Trim, and Underlayment. Tools That Use L-Series Staples Senco:SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450 Hitachi: N3804AB, N3804A Makita: AT63A Duo-Fast: KN1848A, KN1848 Porter Cable: NS150A, NS150, NS100 OTHERS: Accuset: A100LS, A150LS,...

                                                                                                Senco DA19EPBN finish nails
                                                                                                Senco

                                                                                                More Information

                                                                                                Price: $36.29
                                                                                                Availability: Stock
                                                                                                Senco Item #: DA19EPBN -

                                                                                                  The Senco DA19EPBN 1-3/4" Bright 15 Gauge Angled Finish Nail has set the standard for finish carpenters with their outstanding quality and holding power! They are manufactured to Senco's strict specifications thus eliminating or reducing down time due to jamming and other tool malfunctions. Do Not Use The Senco DA19EPBN for ACQ Pressure Treated Lumber. Use stainless steel when maximum corrosion resistance is required. DA Style Finish Nails Fit the Following Tools: (Please check your owners...

                                                                                                  Fasteners For Pneumatic Nailers and Staplers

                                                                                                  DHC Supplies stocks a number of different fasteners that fit in a variety of nail guns and staplers on the market. Whether you are framing a building, installing siding, putting up interior or exterior trim we should have the right fastener for you. Additionally, we have a variety of corrosion protections available in certain fasteners in case that is a requirement for your project. If you do not see a fastener you require please do not hesitate to call our sales department direct at 800-323-2999. We can special order many other types of fasteners we normally do not stock.