Login      View Cart   Checkout   Wish List
Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Dayton Superior Concrete Accessories

For more than 100 years, the people and processes of Dayton Superior have created and refined products and technologies, the result of which are seen every day on virtually every major construction project in North America. Their success is based on their commitment to helping architects, engineers and contractors achieve higher performance, better efficiency, and lasting results. For more information please visit their website.
Dayton Superior Products Can Be Found In The Following Categories
Products 1-32 of 35
Show
6" x 4-3/4" Plastic Cone Snap Ties
Price: $54.60
Availability: Stock
Item #: TIE6SE -

    Dayton Superior 6" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the...

    Jahn-A Bracket
    Price: $3.95
    Availability: Stock
    Item #: JAHN -

      Dayton Superior A81 Jahn-A Bracket is fabricated from high strength steel with a cad plated eccentric and painted body. The 5/8" take-up of the eccentric compensates for minor lumber variations in thickness. The Dayton Superior A81 Jahn-A Bracket can be utilized to hold a single horizontal wale or a single vertical stud with any type of wall form; round, curved, battered, beam and/or columns. The Dayton Superior A81 Jahn-A Bracket can be installed before or after the wales have been...

      Mushroom Style Rebar Protection Caps
      Price: $0.37
      Availability: Stock
      Item #: REBARCAP -

        Mushroom Rebar Protection Caps provide scratch protection when working around in-place rebar. They only help protect workers against minor injuries caused by exposed rebar or pipes. Very Important: These caps do not provide impalement protection. You must use OSHA Rebar Safety Caps to meet impalement protection requirements. Please check you local codes for further information. ...

        Dayton Superior 13244 Walerless 6" Wall  x 3/4" Plywood Spreader Cleats
        Price: $45.00
        Availability: Stock
        Item #: BC346 -

          The Dayton Superior 13244 A22 Walerless Plywood Spreader Cleat Form System is used when forming a 6" wide wall using 3/4" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat...

          Dayton Superior PCC-205 2" - 2-1/4" Aztec Castle Chairs
          Price: $0.52
          Availability: Stock
          Item #: CHAIR2EA -

            Dayton Superior PCC-205 2" - 2-1/4" Aztec Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper concrete flow...

            PCC-205 2" - 2-1/4" Aztec Castle Chairs 480/Bx
            Price: $226.00
            Availability: Stock
            Item #: CHAIR2BX -

              Dayton Superior PCC-205 2" - 2-1/4" (Box of 480) Aztec Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper...

              Jahn-A Bracket
              Price: $207.50
              Availability: Ships Direct
              Item #: JAHN-50 -

                Dayton Superior A81 Jahn-A Bracket is fabricated from high strength steel with a cad plated eccentric and painted body. The 5/8" take-up of the eccentric compensates for minor lumber variations in thickness. The Dayton Superior A81 Jahn-A Bracket can be utilized to hold a single horizontal wale or a single vertical stud with any type of wall form; round, curved, battered, beam and/or columns. The Dayton Superior A81 Jahn-A Bracket can be installed before or after the wales have been...

                Mushroom Style Rebar Protection Caps
                Price: $170.00
                Availability: Stock
                Item #: REBARCAP-500 -

                  Mushroom Rebar Protection Caps (Box of 500) provide scratch protection when working around in-place rebar. They only help protect workers against minor injuries caused by exposed rebar or pipes. Very Important: These caps do not provide impalement protection. You must use OSHA Rebar Safety Caps to meet impalement protection requirements. Please check you local codes for further information. ...

                  Dayton Superior A29 Snap Tie Wrench
                  Price: $27.50
                  Availability: Stock
                  Item #: A29 -

                    The A29 Dayton Superior Snap Tie Breakback Wrench is used to break the shank of the snap ties close to the concrete after the forms have been removed. The A29 Snap Tie Wrench is manufactured from high strength steel that should give you many uses. Total length: 16.25" A29 Instructions

                    6" x 8-1/4" Plastic Cone Snap Ties
                    Price: $65.50
                    Availability: Stock
                    Item #: TIE6LE -

                      Dayton Superior 6" Wall x 8-1/4" Hex Head End Plastic Cone Snap Ties can be used with the #3 forming systems and 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by A-16 Hairpin Snap Tie Wedge. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the form work still in...

                      Dayton Superior A-16 Omni Forming Wedges
                      Price: $1.50
                      Availability: Stock
                      Item #: A-16 -

                        Dayton Superior A-16 Omni Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. Dayton Superior A16 Omni Wedge is a high strength snap tie wedge designed to slip over the head of standard or heavy duty snap ties to provide ample bearing area for proper load distribution into the wales. The wedge can also be applies directly to the plywood when using stubby snap ties with 1-1/4" or 1-5/8" wedges....

                        PCC305 3" - 3-1/4" Aztec Castle Chairs™
                        Price: $0.61
                        Availability: Stock
                        Item #: CHAIR3EA -

                          Dayton Superior Aztec PCC-305 3" to 3-1/4" Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper concrete flow...

                          8" x 4-3/4" Snap Ties - 100/Box
                          Price: $54.60
                          Availability: Stock
                          Item #: TIE8SE -

                            Dayton Superior 8" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the...

                            Dayton Superior 13246 Walerless 8" Wall  x 3/4" Plywood Spreader Cleats
                            Price: $61.80
                            Availability: Stock
                            Item #: BC348 -

                              The Dayton Superior 13246 Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 3/4" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat System...

                              Dayton Superior 13250 Walerless 8" Wall  x 1-1/8" Plywood Spreader Cleats
                              Price: $62.75
                              Availability: Stock
                              Item #: BC1188 -

                                The Dayton Superior 13250 Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 1-1/8" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat...

                                PCC300 3" - 3-1/4" Aztec Castle Chairs™
                                Price: $162.95
                                Availability: Stock
                                Item #: CHAIR3BX -

                                  Dayton Superior PCC-305 3" to 3-1/4" (Box of 288) Aztec Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper...

                                  Dayton Superior A-16 Omni Forming Wedges
                                  Price: $150.00
                                  Availability: Stock
                                  Item #: A-16-100 -

                                  Dayton Superior A-16 Omni Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. Dayton Superior A16 Omni Wedge is a high strength snap tie wedge designed to slip over the head of standard or heavy duty snap ties to provide ample bearing area for proper load distribution into the wales. The wedge can also be applies directly to the plywood when using stubby snap ties with 1-1/4" or 1-5/8" wedges....

                                  8" x 8-1/4" Plastic Cone Snap Ties
                                  Price: $65.10
                                  Availability: Stock
                                  Item #: TIE8LE -

                                    Dayton Superior 8" Wall x 8-1/4" Hex Head End Plastic Cone Snap Ties can be used with the #3 forming systems and 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by A-16 Hairpin Snap Tie Wedge. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the form work still in...

                                    8" x 1-1/4" Plastic Cone Snap Ties
                                    Price: $62.00
                                    Availability: Stock
                                    Item #: TIE8-114 -

                                      Dayton Superior 8" Wall x 1-3/16" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Freight charges are figured shipping from Sparks, Nevada. However, if you are looking...

                                      Dayton Superior 13254 Walerless 10" Wall  x 3/4" Plywood Spreader Cleats
                                      Price: $78.80
                                      Availability: Stock
                                      Item #: BC3410 -

                                        The Dayton Superior 13254 Walerless Plywood Spreader Cleat Form System is used when forming a 10" wide wall using 3/4" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat System...

                                        8" x 1-5/8" Plastic Cone Snap Ties
                                        Price: $62.75
                                        Availability: Stock
                                        Item #: TIE8-158 -

                                          Dayton Superior 8" Wall x 1-5/8" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 1-1/8" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Freight charges are figured shipping from Sparks, Nevada. However, if you are looking...

                                          urnbuckle Form Aligner - Used
                                          Price: $16.90
                                          Availability: Stock
                                          Item #: TURNBUCKLE -

                                            Dayton Superior A27 Turnbuckle Form Aligners are designed to accurately position and plumb vertical forms. The turnbuckle section of the aligner features a 1" diameter self-cleaning coil thread for fast adjustments. Overall length of the aligner is 37" minimum and 40" maximum, offering 3" of effective adjustment. The Dayton Superior A27 Turnbuckle Form Aligner has a bent nailing plate equipped with nail holes and a 15/16" hole to accept 3/4" or 7/8" steel stakes. The A27 Aligner is a rugged...

                                            10" x 4-3/4" Plastic Cone Snap Ties
                                            Price: $59.90
                                            Availability: Stock
                                            Item #: TIE10SE -

                                              Dayton Superior 10" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the...

                                              Dayton Superior 13256 Walerless 12" Wall  x 3/4" Plywood Spreader Cleats
                                              Price: $100.50
                                              Availability: Stock
                                              Item #: BC3412 -

                                                The Dayton Superior 13256 Walerless Plywood Spreader Cleat Form System is used when forming a 12" wide wall using 3/4" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat System...

                                                10" x 8-1/4" Plastic Cone Snap Ties
                                                Price: $67.75
                                                Availability: Stock
                                                Item #: TIE10LE -

                                                  Dayton Superior 10" Wall x 8-1/4" Hex Head End Plastic Cone Snap Ties can be used with the #3 forming systems and 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by A-16 Hairpin Snap Tie Wedge. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the form work still in...

                                                  2 x 4 Cast Iron Screed Hook
                                                  Price: $2.99
                                                  Availability: Stock
                                                  Item #: HOOK24 -

                                                    Dayton Superior G28 Screed Brackets clamp to the top of a nail stake and hold screed bar parallel to the form during flat work finishing. Screed brackets are available for 1/2" x 2" flat bar and 2x4's. Dayton Superior G28 Screed Brackets is used with 3/4" round nail stakes.

                                                    8" x 1-5/8" Plastic Cone Snap Ties
                                                    Price: $79.30
                                                    Availability: Stock
                                                    Item #: TIE10-158 -

                                                      Dayton Superior 10" Wall x 1-5/8" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 1-1/8" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Freight charges are figured shipping from Sparks, Nevada. However, if you are...

                                                      12" x 4-3/4" Plastic Cone Snap Ties
                                                      Price: $63.00
                                                      Availability: Stock
                                                      Item #: TIE12SE -

                                                        Dayton Superior 12" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the...

                                                        12" x 8-1/4" Plastic Cone Snap Ties
                                                        Price: $69.50
                                                        Availability: Stock
                                                        Item #: TIE12LE -

                                                          Dayton Superior 12" Wall x 8-1/4" Hex Head End Plastic Cone Snap Ties can be used with the #3 forming systems and 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by A-16 Hairpin Snap Tie Wedge. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the form work still in...

                                                          14" x 4-3/4" Snap Ties - 100/Box
                                                          Price: $66.30
                                                          Availability: Ships Direct
                                                          Item #: TIE14SE -

                                                            Dayton Superior 14" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the...

                                                            14" x 8-1/4" Plastic Cone Snap Ties
                                                            Price: $73.97
                                                            Availability: Ships Direct
                                                            Item #: TIE14LE -

                                                              Dayton Superior 14" Wall x 8-1/4" Hex Head End Plastic Cone Snap Ties can be used with the #3 forming systems and 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by A-16 Hairpin Snap Tie Wedge. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the form work still in...

                                                              16" x 4-3/4" Plastic Cone Snap Ties
                                                              Price: $66.20
                                                              Availability: Ships Direct
                                                              Item #: TIE16SE -

                                                                Dayton Superior 16" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the...