Questions?
Call Our Employee Owner
Sales Department Direct

800-323-2999

Products 1-48 of 68
Show
4" Double Looped Bar Ties
American Wire Tie

More Information

Price: $7.50
Availability: Stock
American Wire Tie Item #: TW4 -

    Using either a Spring Loaded Automatic Bar Tie Twister or a Wood Handled Bar Tie Twister rebar tying is a snap with the Double Looped Bar Tie System. Just pull the tie around the joint, attach the hook on your tying tool, twist or pull and you are done. Please Note: If you are not sure what size you need you can view the Bar Tie Chart to see which ties you will need. 4" Bar Ties Various Rebar Combinations: #2 Bar (1/4") to #3 Bar (3/8") ...

    Dayton Superior 13244 Walerless 6" Wall  x 3/4" Plywood Spreader Cleats
    Dayton Superior

    More Information

    Price: $45.00
    Availability: Stock
    Dayton Superior Item #: BC346 -

      The Dayton Superior 13244 A22 Walerless Plywood Spreader Cleat Form System is used when forming a 6" wide wall using 3/4" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat...

      Dayton Superior A4H Hex Head Snap Ties
      Dayton Superior

      More Information

      Price: $49.30
      Availability: Stock
      Dayton Superior Item #: 15300 -

        Dayton Superior #15300 A4H 6" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back...

        Simpson Strong Tie AM5/8 AnchorMate Anchor Bolt Holders
        Simpson Strong-Tie

        More Information

        Price: $1.61
        Availability: Stock
        Simpson Strong-Tie Item #: AM5/8EA -

          Simpson Strong Tie AnchorMate® 5/8" Anchor Bolt Holders are designed to hold 5/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is no need for a hex nut during the pour. Additionally and Anchormate® protects the threads from splashed concrete. Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and easy to use....

          Quik-Mark Inverted Fluorescent Orange Paint 17 oz
          Krylon Industrial

          More Information

          Price: $3.30
          Availability: Stock
          Krylon Industrial Item #: 03620EA -

            Krylon Industrial 03620 Fluorescent Blue QUIK-MARK™ INVERTED MARKING PAINTS have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry. These fast-drying products penetrate and adhere to hot surfaces, and deliver a line you can count on for all your locating, marking and surveying needs. One pass valve for bold, bright, visible markings Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves Spray-Thru™...

            FASTFOOT Forming Fabric
            Fab-Form

            More Information

            Price: $88.00
            Availability: Stock
            Fab-Form Item #: FASTFOOT18 -

              FASTFOOT® FF50 Fabric Forms eliminated the use of heavy dimensional lumber and plywood when forming footing 18" wide by 10" deep or less. Because of the speed of preparation and tear down the FASTFOOT® system offers a great labor savings. Compared To Lumber 100 times lighter Adapts to uneven ground Protects stakes and screed boards from concrete damage Closed form, NO concrete leakage Perfect for steps Prevents ground moisture wicking up into concrete Prevents contamination of ground...

              Jahn-A Bracket
              Dayton Superior

              More Information

              Price: $4.15
              Availability: Stock
              Dayton Superior Item #: JAHN -

                Dayton Superior A81 Jahn-A Bracket is fabricated from high strength steel with a cad plated eccentric and painted body. The 5/8" take-up of the eccentric compensates for minor lumber variations in thickness. The Dayton Superior A81 Jahn-A Bracket can be utilized to hold a single horizontal wale or a single vertical stud with any type of wall form; round, curved, battered, beam and/or columns. The Dayton Superior A81 Jahn-A Bracket can be installed before or after the wales have been...

                Mushroom Style Rebar Protection Caps
                Dayton Superior

                More Information

                Price: $0.37
                Availability: Stock
                Dayton Superior Item #: REBARCAP -

                  Mushroom Rebar Protection Caps provide scratch protection when working around in-place rebar. They only help protect workers against minor injuries caused by exposed rebar or pipes. Very Important: These caps do not provide impalement protection. You must use OSHA Rebar Safety Caps to meet impalement protection requirements. Please check you local codes for further information. ...

                  Dayton Superior PCC-205 2" - 2-1/4" Aztec Castle Chairs
                  Dayton Superior

                  More Information

                  Price: $0.52
                  Availability: Stock
                  Dayton Superior Item #: CHAIR2EA -

                    Dayton Superior PCC-205 2" - 2-1/4" Aztec Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper concrete flow...

                    WT6 Simpson Strong-Tie 6" Wedge Form Ties
                    Simpson Strong-Tie

                    More Information

                    Price: $97.64
                    Availability: Stock
                    Simpson Strong-Tie Item #: WT6 -

                      The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 6". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If there...

                      6" Double Looped Bar Ties
                      American Wire Tie

                      More Information

                      Price: $8.25
                      Availability: Stock
                      American Wire Tie Item #: TW6 -

                        Using either a Spring Loaded Automatic Bar Tie Twister or a Wood Handled Bar Tie Twister rebar tying is a snap with the Double Looped Bar Tie System. Just pull the tie around the joint, attach the hook on your tying tool, twist or pull and you are done. Please Note: If you are not sure what size you need you can view the Bar Tie Chart to see which ties you will need. 6" Bar Ties Various Rebar Combinations: #4 Bar (1/2") to #6 Bar (3/4") #5 Bar (5/8") to #5 Bar (5/8") ...

                        Dayton Superior A4H Hex Head Snap Ties
                        Dayton Superior

                        More Information

                        Price: $58.50
                        Availability: Stock
                        Dayton Superior Item #: 15367 -

                          Dayton Superior 15367 A4H 6" Wall x 8-1/4" Hex Head End Plastic Cone Snap Ties can be used with the #3 forming systems and 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by A-16 Hairpin Snap Tie Wedge. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the form work...

                          Simpson Strong Tie AnchorMate Anchor Bolt Holders
                          Simpson Strong-Tie

                          More Information

                          Price: $130.68
                          Availability: Stock
                          Simpson Strong-Tie Item #: AM5/8BX -

                            Simpson Strong Tie AnchorMate® 5/8" Anchor Bolt Holders are designed to hold 5/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is no need for a hex nut during the pour. Additionally and Anchormate® protects the threads from splashed concrete. 100 per Box Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and...

                            Quik-Mark Inverted Fluorescent Orange Paint 17 oz
                            Krylon Industrial

                            More Information

                            Price: $38.16
                            Availability: Stock
                            Krylon Industrial Item #: 03620CS -

                              Krylon Industrial 03620 Fluorescent Blue (Case of 12 cans) QUIK-MARK™ INVERTED MARKING PAINTS have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry. These fast-drying products penetrate and adhere to hot surfaces, and deliver a line you can count on for all your locating, marking and surveying needs. One pass valve for bold, bright, visible markings Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves...

                              FASTFOOT Forming Fabric
                              Fab-Form

                              More Information

                              Price: $332.00
                              Availability: Stock
                              Fab-Form Item #: FASTFOOT18BX -

                                FASTFOOT® FF50 Fabric Forms eliminated the use of heavy dimensional lumber and plywood when forming footing 18" wide by 10" deep or less. Because of the speed of preparation and tear down the FASTFOOT® system offers a great labor savings. Compared To Lumber 100 times lighter Adapts to uneven ground Protects stakes and screed boards from concrete damage Closed form, NO concrete leakage Perfect for steps Prevents ground moisture wicking up into concrete Prevents contamination of ground...

                                Jahn-A Bracket
                                Dayton Superior

                                More Information

                                Price: $207.50
                                Availability: Ships Direct
                                Dayton Superior Item #: JAHN-50 -

                                  Dayton Superior A81 Jahn-A Bracket is fabricated from high strength steel with a cad plated eccentric and painted body. The 5/8" take-up of the eccentric compensates for minor lumber variations in thickness. The Dayton Superior A81 Jahn-A Bracket can be utilized to hold a single horizontal wale or a single vertical stud with any type of wall form; round, curved, battered, beam and/or columns. The Dayton Superior A81 Jahn-A Bracket can be installed before or after the wales have been...

                                  Mushroom Style Rebar Protection Caps
                                  Dayton Superior

                                  More Information

                                  Price: $170.00
                                  Availability: Stock
                                  Dayton Superior Item #: REBARCAP-500 -

                                    Mushroom Rebar Protection Caps (Box of 500) provide scratch protection when working around in-place rebar. They only help protect workers against minor injuries caused by exposed rebar or pipes. Very Important: These caps do not provide impalement protection. You must use OSHA Rebar Safety Caps to meet impalement protection requirements. Please check you local codes for further information. ...

                                    PCC-205 2" - 2-1/4" Aztec Castle Chairs 480/Bx
                                    Dayton Superior

                                    More Information

                                    Price: $226.00
                                    Availability: Stock
                                    Dayton Superior Item #: CHAIR2BX -

                                      Dayton Superior PCC-205 2" - 2-1/4" (Box of 480) Aztec Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper...

                                      WT8 Simpson Strong-Tie 8" Wedge Form Ties
                                      Simpson Strong-Tie

                                      More Information

                                      Price: $103.04
                                      Availability: Stock
                                      Simpson Strong-Tie Item #: WT8 -

                                        The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 8". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If there...

                                        8" Double Looped Bar Ties
                                        American Wire Tie

                                        More Information

                                        Price: $10.50
                                        Availability: Stock
                                        American Wire Tie Item #: TW8 -

                                          Using either a Spring Loaded Automatic Bar Tie Twister or a Wood Handled Bar Tie Twister rebar tying is a snap with the Double Looped Bar Tie System. Just pull the tie around the joint, attach the hook on your tying tool, twist or pull and you are done. Please Note: If you are not sure what size you need you can view the Bar Tie Chart to see which ties you will need. 8" Bar Ties Various Rebar Combinations: #4 Bar (1/2") to #10 Bar (1-1/4") #5 Bar (5/8") to #8 Bar (1") #5 Bar (5/8") to #9 Bar...

                                          Dayton Superior 13246 Walerless 8" Wall  x 3/4" Plywood Spreader Cleats
                                          Dayton Superior

                                          More Information

                                          Price: $61.80
                                          Availability: Stock
                                          Dayton Superior Item #: BC348 -

                                            The Dayton Superior 13246 Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 3/4" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat System...

                                            Dayton Superior A4H Hex Head Snap Ties
                                            Dayton Superior

                                            More Information

                                            Price: $51.50
                                            Availability: Stock
                                            Dayton Superior Item #: 15306 -

                                              Dayton Superior 15306 A4H 8" Wall x 4-3/4" Hex Head End Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back...

                                              Dayton Superior A-16 Omni Forming Wedges
                                              Dayton Superior

                                              More Information

                                              Price: $1.50
                                              Availability: Stock
                                              Dayton Superior Item #: A-16 -

                                                Dayton Superior A-16 Omni Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. Dayton Superior A16 Omni Wedge is a high strength snap tie wedge designed to slip over the head of standard or heavy duty snap ties to provide ample bearing area for proper load distribution into the wales. The wedge can also be applies directly to the plywood when using stubby snap ties with 1-1/4" or 1-5/8" wedges....

                                                Simpson Strong Tie AnchorMate AM7/8 Anchor Bolt Holders
                                                Simpson Strong-Tie

                                                More Information

                                                Price: $1.61
                                                Availability: Stock
                                                Simpson Strong-Tie Item #: AM7/8EA -

                                                  Simpson Strong Tie AnchorMate® 7/8" Anchor Bolt Holders are designed to hold 7/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is no need for a hex nut during the pour. Additionally and Anchormate® protects the threads from splashed concrete. Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and easy to use....

                                                  Quik-Mark 03500 Inverted Fluorescent Orange Paint 17 oz
                                                  Krylon Industrial

                                                  More Information

                                                  Price: $3.30
                                                  Availability: Stock
                                                  Krylon Industrial Item #: 03500EA -

                                                    Krylon Industrial 03500 Clear QUIK-MARK™ INVERTED MARKING PAINTS have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry. These fast-drying products penetrate and adhere to hot surfaces. Clear marking paint is ideal for keeping your chalk lines from washing or blowing away. One pass valve for bold, bright, visible markings Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves Spray-Thru™ cap -...

                                                    Fastfoot® Sewn Corners
                                                    Fab-Form

                                                    More Information

                                                    Price: $8.25
                                                    Availability: Stock
                                                    Fab-Form Item #: FASTFOOT18-C -

                                                      FASTFOOT® 18" Sewn Corners are the perfect accessory to the 18" FASTFOOT® Footing on a roll. Using these sewn corners means no cutting and can easily be installed by one person. The FASTFOOT® Corners are 4' x 4' giving you approximately 6 lineal feet of forms when figuring in the over lap. Forms 90° corners Saves time and labor No required cutting ...

                                                      PCC305 3" - 3-1/4" Aztec Castle Chairs™
                                                      Dayton Superior

                                                      More Information

                                                      Price: $0.61
                                                      Availability: Stock
                                                      Dayton Superior Item #: CHAIR3EA -

                                                        Dayton Superior Aztec PCC-305 3" to 3-1/4" Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper concrete flow...

                                                        OSHA Round Rebar Caps - Orange
                                                        Mutual Industries

                                                        More Information

                                                        Price: $1.25
                                                        Availability: Stock
                                                        Mutual Industries Item #: RCAP-ORANGE-1 -

                                                          Large Round Cap For Better Protection!Mutual Industries Patented 14640-4 Orange OSHA Rebar Caps are made of space age high density polymer to protect against impalement injuries on the jobsite. The 14640-4 Round Rebar Caps have a 4.52" diameter round top. The caps meet OSHA requirement 344.90 and have a CAL OSHA Approval #C1719AG. These OSHA approved rebar caps fit #3 to #8 rebar. Caps to fit #9 to #16 rebar are also available on a special order basis. ...

                                                          WT10 Simpson Strong-Tie 10" Wedge Form Ties
                                                          Simpson Strong-Tie

                                                          More Information

                                                          Price: $120.95
                                                          Availability: Stock
                                                          Simpson Strong-Tie Item #: WT10 -

                                                            The Simpson Strong-Tie WT-10 Wedge Form Ties are designed for low foundation wall applications with a 10" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 10". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If...

                                                            Dayton Superior 13250 Walerless 8" Wall  x 1-1/8" Plywood Spreader Cleats
                                                            Dayton Superior

                                                            More Information

                                                            Price: $62.75
                                                            Availability: Stock
                                                            Dayton Superior Item #: BC1188 -

                                                              The Dayton Superior 13250 Walerless Plywood Spreader Cleat Form System is used when forming a 8" wide wall using 1-1/8" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat...

                                                              Dayton Superior A4H Hex Head Snap Ties
                                                              Dayton Superior

                                                              More Information

                                                              Price: $57.50
                                                              Availability: Stock
                                                              Dayton Superior Item #: 15370 -

                                                                Dayton Superior 15370 A4H 8" Wall x 8-1/4" Hex Head End Plastic Cone Snap Ties can be used with the #3 forming systems and 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by A-16 Hairpin Snap Tie Wedge. Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot-forged integral 1/2" hex-shaped heads. The hex head allows short-end snap ties to be broken back with the form work...

                                                                Dayton Superior A-16 Omni Forming Wedges
                                                                Dayton Superior

                                                                More Information

                                                                Price: $150.00
                                                                Availability: Stock
                                                                Dayton Superior Item #: A-16-100 -

                                                                Dayton Superior A-16 Omni Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. Dayton Superior A16 Omni Wedge is a high strength snap tie wedge designed to slip over the head of standard or heavy duty snap ties to provide ample bearing area for proper load distribution into the wales. The wedge can also be applies directly to the plywood when using stubby snap ties with 1-1/4" or 1-5/8" wedges....

                                                                Simpson Strong Tie AnchorMate AM7/8 Anchor Bolt Holders
                                                                Simpson Strong-Tie

                                                                More Information

                                                                Price: $130.68
                                                                Availability: Stock
                                                                Simpson Strong-Tie Item #: AM7/8BX -

                                                                  Simpson Strong Tie AnchorMate® 7/8" Anchor Bolt Holders are designed to hold 7/8" anchor bolts including SSTB Bolts in place before the concrete pour. With a unique grip placed properly there is no need for a hex nut during the pour. Additionally and Anchormate® protects the threads from splashed concrete. Built-in 2x4 and 2x6 stops eliminate measuring. Elevated bolt grippers allow easy trowel finishing. Color-coded for easy size identification. Lightweight, durable and easy to use....

                                                                  Quik-Mark Inverted Fluorescent Orange Paint 17 oz
                                                                  Krylon Industrial

                                                                  More Information

                                                                  Price: $38.16
                                                                  Availability: Stock
                                                                  Krylon Industrial Item #: 03500CS -

                                                                    Krylon Industrial 03500 Clear (Case of 12 cans) QUIK-MARK™ INVERTED MARKING PAINTS have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry. These fast-drying products penetrate and adhere to hot surfaces. Clear marking paint is ideal for keeping your chalk lines from washing or blowing away. One pass valve for bold, bright, visible markings Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves...

                                                                    FASTFOOT Forming Fabric
                                                                    Fab-Form

                                                                    More Information

                                                                    Price: $114.95
                                                                    Availability: Stock
                                                                    Fab-Form Item #: FASTFOOT24 -

                                                                      FASTFOOT® FF62 Fabric Forms eliminated the use of heavy dimensional lumber and plywood when forming footing 24" wide by 13" deep or less. Because of the speed of preparation and tear down the FASTFOOT® system offers a great labor savings. Compared To Lumber 100 times lighter Adapts to uneven ground Protects stakes and screed boards from concrete damage Closed form, NO concrete leakage Perfect for steps Prevents ground moisture wicking up into concrete Prevents contamination of ground...

                                                                      PCC300 3" - 3-1/4" Aztec Castle Chairs™
                                                                      Dayton Superior

                                                                      More Information

                                                                      Price: $162.95
                                                                      Availability: Stock
                                                                      Dayton Superior Item #: CHAIR3BX -

                                                                        Dayton Superior PCC-305 3" to 3-1/4" (Box of 288) Aztec Castle Chairs are lightweight, yet strong. The wide built-in sand-ring provides a stable platform, perfect for use in loosely compacted soil or with on-grade applications requiring a plastic vapor barrier for moisture protection. The patented stackable design allows for easy handling and placement. Made from engineered composite resins, the Castle Chair® will not rust or degrade in the concrete. With large cutout windows for proper...

                                                                        OSHA Round Rebar Caps - Orange
                                                                        Mutual Industries

                                                                        More Information

                                                                        Price: $55.00
                                                                        Availability: Stock
                                                                        Mutual Industries Item #: RCAP-ORANGE-50 -

                                                                          Large Round Cap For Better Protection!Mutual Industries Patented 14640-4 Orange OSHA Rebar Caps are made of space age high density polymer to protect against impalement injuries on the jobsite. The 14640-4 Round Rebar Caps have a 4.52" diameter round top. The caps meet OSHA requirement 344.90 and have a CAL OSHA Approval #C1719AG. These OSHA approved rebar caps fit #3 to #8 rebar. Caps to fit #9 to #16 rebar are also available on a special order basis. ...

                                                                          WT12 Simpson Strong-Tie 12" Wedge Form Ties
                                                                          Simpson Strong-Tie

                                                                          More Information

                                                                          Price: $145.27
                                                                          Availability: Stock
                                                                          Simpson Strong-Tie Item #: WT12 -

                                                                            The Simpson Strong-Tie WT-12 Wedge Form Ties are designed for low foundation wall applications with a 12" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 12". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If...

                                                                            Dayton Superior 13254 Walerless 10" Wall  x 3/4" Plywood Spreader Cleats
                                                                            Dayton Superior

                                                                            More Information

                                                                            Price: $78.80
                                                                            Availability: Stock
                                                                            Dayton Superior Item #: BC3410 -

                                                                              The Dayton Superior 13254 Walerless Plywood Spreader Cleat Form System is used when forming a 10" wide wall using 3/4" plywood. The Dayton Superior Spreader Cleats are designed for the contractor who is engaged in a variety of form work up to 32" high. On panels up to 24" high the cleats are spaced at 32" maximum center to center spacing. For panels over 24" and up to 32" high, the spreader cleats should be spaced a maximum of 24" center to center. The Dayton Superior A22 Spreader Cleat System...

                                                                              Dayton Superior A3 Round End Snap Ties
                                                                              Dayton Superior

                                                                              More Information

                                                                              Price: $65.95
                                                                              Availability: Stock
                                                                              Dayton Superior Item #: 15423 -

                                                                                Dayton Superior 15423 A3 8" Wall x 1-3/16" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Freight charges are figured shipping from Sparks, Nevada. However, if you are...

                                                                                FASTFOOT Forming Fabric
                                                                                Fab-Form

                                                                                More Information

                                                                                Price: $429.95
                                                                                Availability: Stock
                                                                                Fab-Form Item #: FASTFOOT24BX -

                                                                                  FASTFOOT® FF62 Fabric Forms eliminated the use of heavy dimensional lumber and plywood when forming footing 24" wide by 13" deep or less. Because of the speed of preparation and tear down the FASTFOOT® system offers a great labor savings. Compared To Lumber 100 times lighter Adapts to uneven ground Protects stakes and screed boards from concrete damage Closed form, NO concrete leakage Perfect for steps Prevents ground moisture wicking up into concrete Prevents contamination of ground...

                                                                                  135-072 #18 x 550 Fluorescent Pink Twisted Nylon Seine Twine
                                                                                  CWC

                                                                                  More Information

                                                                                  Price: $4.75
                                                                                  Availability: Stock
                                                                                  CWC Item #: STR12F -

                                                                                    CWC 135-072 #18 x 550' Fluorescent Pink Twisted Seine Twine (also referred to as chalk or mason line) has excellent resistance to rot, abrasion, water, oil, grease and most chemicals. Less bend, lower stress point than braided seine twine. Ties easily and knots securely. Common to the marine, electrical and construction industries, this twine is also useful in home and garden applications. Resists abrasion, mildew and most chemicals Used for chalk line, fishing line and net repair #18 Size ...

                                                                                    Quik-Mark Inverted Fluorescent Orange Paint 17 oz
                                                                                    Krylon Industrial

                                                                                    More Information

                                                                                    Price: $3.30
                                                                                    Availability: Stock
                                                                                    Krylon Industrial Item #: 03630EA -

                                                                                      Krylon Industrial 03630 Fluorescent Green QUIK-MARK™ INVERTED MARKING PAINTS have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry. These fast-drying products penetrate and adhere to hot surfaces, and deliver a line you can count on for all your locating, marking and surveying needs. One pass valve for bold, bright, visible markings Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves Spray-Thru™...

                                                                                      W1 Simpson Strong-Tie Wedges for Form Ties
                                                                                      Simpson Strong-Tie

                                                                                      More Information

                                                                                      Price: $96.62
                                                                                      Availability: Stock
                                                                                      Simpson Strong-Tie Item #: W1 -

                                                                                        Simpson Strong Tie W1 Wedges are designed to be used with the Simpson Wedge Form Ties when forming low foundation walls. Two (2) W1 wedges are required for each wedge form tie used. Refer to technical bulletin T-WT for recommended spacing. Additional Simpson Strong-Tie Information If there are any items on the Simpson Strong-Tie Website that you do not see on the DHC Supplies website we will gladly special order them. Most special order Simpson items ship the same or next business day. Call us...

                                                                                        8" x 1-5/8" Plastic Cone Snap Ties
                                                                                        Dayton Superior

                                                                                        More Information

                                                                                        Price: $66.75
                                                                                        Availability: Stock
                                                                                        Dayton Superior Item #: 15407 -

                                                                                          Dayton Superior A3 15407 8" Wall x 1-5/8" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 1-1/8" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Freight charges are figured shipping from Sparks, Nevada. However, if you...

                                                                                          Fastfoot® Sewn Corners
                                                                                          Fab-Form

                                                                                          More Information

                                                                                          Price: $9.95
                                                                                          Availability: Stock
                                                                                          Fab-Form Item #: FASTFOOT24-C -

                                                                                            FASTFOOT® 24" Sewn Corners are the perfect accessory to the 24" FASTFOOT® Footing on a roll. Using these sewn corners means no cutting and can easily be installed by one person. The FASTFOOT® Corners are 4' x 4' giving you approximately 6 lineal feet of forms when figuring in the over lap. Forms 90° corners Saves time and labor No required cutting ...

                                                                                            Fluorescent Pink 135-127 #18 x 1100 Twisted Nylon Seine Twine
                                                                                            CWC

                                                                                            More Information

                                                                                            Price: $7.95
                                                                                            Availability: Stock
                                                                                            CWC Item #: STR1F -

                                                                                              CWC 135-127 #18 x 1,100' Fluorescent Pink Twisted Seine Twine (also referred to as chalk or mason line) has excellent resistance to rot, abrasion, water, oil, grease and most chemicals. Less bend, lower stress point than braided seine twine. Ties easily and knots securely. Common to the marine, electrical and construction industries, this twine is also useful in home and garden applications. Resists abrasion, mildew and most chemicals Used for chalk line, fishing line and net repair #18 Size ...

                                                                                              Quik-Mark Inverted Fluorescent Green Paint 17 oz
                                                                                              Krylon Industrial

                                                                                              More Information

                                                                                              Price: $38.16
                                                                                              Availability: Stock
                                                                                              Krylon Industrial Item #: 03630CS -

                                                                                                Krylon Industrial 03630 (Case of 12) Fluorescent Safety Green QUIK-MARK™ INVERTED MARKING PAINTS have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry. These fast-drying products penetrate and adhere to hot surfaces, and deliver a line you can count on for all your locating, marking and surveying needs. One pass valve for bold, bright, visible markings Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves...